Description
2200VA APC Smart-UPS 2.2KVA LCD 230V SMT2200I
2200VA APC Smart-UPS 2.2KVA LCD 230V SMT2200I is easy to operate thanks to the LCD screen. 2200VA APC Smart-UPS can also be connected directly to the network with the optional APC Network Management Card (AP9630).
2200VA APC Smart-UPS is easy to manage remotely and can send a shutdown signal to multiple physical and/or virtual servers via the network.
2200VA APC Smart-UPS internal battery cartridge (RBC55) can be replaced simply, safely and independently. This without having to disable the APC SMT2200I or connected equipment. This way you can easily and cheaply extend the life of the APC Smart-UPS and your equipment will always stay online.
- Capacity: 2200VA/1980W
- Input voltage: 230V
- Output voltage: 230V
- Output power capacity: 1980 Watts / 2200 VA
- Waveform type: Sine wave
- Nominal input/output frequency: 50/60 Hz
- Input connections: IEC-320 C20, Schuko CEE 7/7P
- Output connections: (8) IEC 320 C13, (1) IEC 320 C19
- Battery type: Sealed, maintenance-free lead-acid battery with suspended electrolyte
- Battery runtime: Varies based on load and battery condition
- Typical recharge time: 3 hours
- Interface: SmartSlot, USB
- Audible alarm: Alarm when on battery, low battery, overload, and fault conditions
- Display: LCD panel for status information and configuration
- Surge energy rating: 645 Joules
- Efficiency: Up to 97%
- Dimensions (H x W x D): 219 x 171 x 439 mm
- Output Power Capacity - 1980 Watts / 2200 VA
- Max Configurable Power - 1980 Watts / 2200 VA
- Nominal Output Voltage - 230V
- Output Voltage Note - Configurable for 220 : 230 or 240 nominal output voltage
- Efficiency at Full Load - 95%
- Output Voltage Distortion - Less than 5% at full load.
- Output Frequency (sync to mains) - 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
- Crest Factor - 3 : 1
- Waveform Type - Sine wave
- Output Connections
| (8) IEC 320 C13 |
|
| (1) IEC 320 C19 |
|
| (2) IEC Jumpers |
|
Input
- Nominal Input Voltage - 230V
- Input Frequency - 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
| IEC-320 C20 |
|
| Schuko CEE 7 / EU1-16P |
|
| British BS1363A |
|
- Input voltage range for main operations - 160 - 286V
- Input voltage adjustable range for mains operation -151 - 302V
- Maximum Input Current 10A
Batteries & Runtime
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time - 3 hour(s)
- Replacement Battery - RBC55
Communications & Management
- Interface Port(s) - SmartSlot
- Available SmartSlot™ Interface Quantity -1
