4MP Fixed Dome Network Camera

SKU: DS-2CD1143G0-I(2.8mm)
In Stock
UGX 315,000
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
Other people want this. 2 people have this in their carts right now.
SKU: DS-2CD1143G0-I(2.8mm) Categories: ,
  • Resolution: 4 MP (2560 x 1440)
  • 2.8 mm / 100° lens
  • H.265+/H.265/H.264+/H.264/MJPEG video compression
  • 3D-DNR, DWDR, BLC video processing functions
  • Access via Hik-Connect app
  • Region of interest (ROI)
  • Mechanically switching IR filter
  • IK10 rating (vandal-proof)
  • IP67 rating
  • Power: 12 VDC or PoE (802.3af)

Description

Product Description

The DS-2CD1143G0-I camera is dedicated for IP CCTV systems. The ceiling camera has been equipped with 4 MP 1/3″ CMOS sensor providing good video coverage even in low-light conditions. Along with IR illuminator with range up to 30 m, the camera can also operate in complete darkness. The built-in 2.8 mm lens has 100° viewing angle. The IP67-rated housing of the camera protects the electronics against adverse weather conditions. The camera can be powered conventionally from a 12 VDC source or with the use of PoE option (802.3af).

HIKVISION DS-2CD1143G0-I Dome IP Camera Features

  • Resolution: 4 MP (2560 x 1440)
  • 2.8 mm / 100° lens
  • H.265+/H.265/H.264+/H.264/MJPEG video compression
  • 3D-DNR, DWDR, BLC video processing functions
  • Access via Hik-Connect app
  • Region of interest (ROI)
  • Mechanically switching IR filter
  • IK10 rating (vandal-proof)
  • IP67 rating
  • Power: 12 VDC or PoE (802.3af)
Specifications
Name HIKVISION DS-2CD1143G0-I
Code K17266
Video system IP
Housing type Ceiling (dome)
Direction adjustment 2-axis
Image sensor 1/3″ Progressive Scan CMOS
Sensitivity 0.028 lx @ (F2.0, AGC ON),
0 lx in IR mode
Lens 2.8 mm @ F2.0 / 100o
Resolution 2560 x 1440 pixels
Frame rate 20 fps at 2560 x 1440,
25 fps at lower res.
Compression H.265+/H.265/H.264+/H.264/MJPEG
Number of video streams 2
Bit rate range 32 kbps – 8 Mbps
IR range Up to 30 m
Video processing 3D-DNR, DWDR, BLC
Mechanically switching IR filter  Yes
Gain Automatic/Preset
Alarm events Motion detection, video tampering
Intelligent image analysis Not implemented
Corridor mode Yes
ROI 1 region
ANR  No
Recording NAS (NFS/SMB/CIFS), FTP (screenshots)
Network interface RJ-45 10/100Base-T
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Supported standards ONVIF (S, G profiles), ISAPI
Housing material  Metal, plastics
IP and IK ratings  IP67, IK10
Power 12 VDC ± 25%
PoE IEEE 802.3af
Power consumption Max. 5 W
Operating temperature range -30°C …+60°C
Dimensions Φ111 × 82 mm
Weight 0.57 kg

Reviews

There are no reviews yet.

Be the first to review “4MP Fixed Dome Network Camera”

Your email address will not be published. Required fields are marked *

Quick Comparison

Settings4MP Fixed Dome Network Camera removeTP-Link TD-W8961ND Wireless N ADSL2+ Modem Router removeTP-Link TL-SF1024D 24-port 10/100Mbps Desktop/Rackmount Switch removeD-Link 48-Port Switch (DES-1210-52) removeD-Link 10-Port Gigabit WebSmart PoE Switch (DGS-1210-10P) removeD-Link Cat6 UTP 23AWG 305 M/Roll (NCB-C6UGRYR-305) remove
Image
SKUDS-2CD1143G0-I(2.8mm)
Rating
PriceUGX 315,000UGX 150,000UGX 250,000UGX 2,240,000UGX 1,250,000UGX 700,000
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Resolution: 4 MP (2560 x 1440)
  • 2.8 mm / 100° lens
  • H.265+/H.265/H.264+/H.264/MJPEG video compression
  • 3D-DNR, DWDR, BLC video processing functions
  • Access via Hik-Connect app
  • Region of interest (ROI)
  • Mechanically switching IR filter
  • IK10 rating (vandal-proof)
  • IP67 rating
  • Power: 12 VDC or PoE (802.3af)
  • 450Mbps wireless transmission rate, brings smooth wireless N experience
  • Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
  • Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
  • 24 10/100M RJ45 ports.
  • Innovative energy-efficient technology saves power up to 75%
  • Supports MAC address self-learning and auto MDI/MDIX.
  • Standard 13-inch steel case.
  • 4 Pairs Unshielded Twisted Pair (UTP) Cable
  • Conductor Metal: Solid Bare Copper with 23 AWG
  • Color Code: Gray
  • Jacket Material: PVC UL94V-0
  • PE Central Cross separator
Content

Product Description

The DS-2CD1143G0-I camera is dedicated for IP CCTV systems. The ceiling camera has been equipped with 4 MP 1/3″ CMOS sensor providing good video coverage even in low-light conditions. Along with IR illuminator with range up to 30 m, the camera can also operate in complete darkness. The built-in 2.8 mm lens has 100° viewing angle. The IP67-rated housing of the camera protects the electronics against adverse weather conditions. The camera can be powered conventionally from a 12 VDC source or with the use of PoE option (802.3af).

HIKVISION DS-2CD1143G0-I Dome IP Camera Features

  • Resolution: 4 MP (2560 x 1440)
  • 2.8 mm / 100° lens
  • H.265+/H.265/H.264+/H.264/MJPEG video compression
  • 3D-DNR, DWDR, BLC video processing functions
  • Access via Hik-Connect app
  • Region of interest (ROI)
  • Mechanically switching IR filter
  • IK10 rating (vandal-proof)
  • IP67 rating
  • Power: 12 VDC or PoE (802.3af)

Product Description

The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.

TP-Link TL-WA901ND Features

Wireless N Speed & Range Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not! Multiple Operating Modes- Easy to Build WLAN Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone. Passive PoE Supported-More Flexible Deployment The TL-WA901ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

Product Description

The TP-Link TL-SF1024D provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve your old network to a 100Mbps network. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1024D can save up to 75%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.

TP-Link TL-SF1024D Features

TP-LINK Green Technology This new generation The 24-Port 10/100Mbps Switch TL-SF1024D features the latest innovative energy-efficient technologies that can significantly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting certain hazardous materials. Besides, 80% of the packaging material can be recycled. High Performance The rack-mount size steel case design, combined with a safety-certified internal power supply, makes the switch the most robust product, which is very cost-effective for a less than 16-user environment. Featuring non-blocking switching architecture, TL-SF1024D forwards and filters packets at full wire speed for maximum throughput. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1024D work reliably. Easy to Use The auto features of this fast ethernet switch make installation plug and play hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.
• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports • Support 2 x 10/100/1000 Base-T/SFP Combo Slots • IEEE 802.1Q Virtual LAN (VLAN) • Support  IGMP and MLD Snooping • Support Auto Surveillance and Auto Voice VLAN • Broadcast, Unicast and Multicast Storm Control • Support Smart IP-MAC-Port Binding • Support IEEE 802.1p QOS and COS • 802.1x port-base Authentication through RADIUS serversEight (8) 10/100/1000BASE-T PoE /PoE Ports Two (2) Gigabit SFP Ports Supports PoE and PoE (802.3af and 802.3at) with 78W PoE power budget Supports 802.1Q VLAN, Auto Voice VLAN and Auto Surveillance VLAN Advanced features include QoS, Bandwidth Limiting, Link Aggregation, Port Mirroring, Spanning Tree and IGMP Snooping Security features include Access Control List (ACL), 802.1X / RADIUS, ARP Spoofing Prevention, and D-Link Safeguard Engine Easily managed using intuitive GUI, D-Link Network Assistant Utility, D-View 7, Compact CLI or SNMPD-Link Cat6 UTP 23AWG 305 M/Roll (NCB-C6UGRYR-305) solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). These cables exceed performance requirements specified by the TIA/EIA-568C.2 and IEC 60603-7-4 standards. As streaming video and multimedia over LAN are gaining popularity, users demand faster data transmission and reduced waiting time. D-Link cables are ideal for simple, cost-effective and high-speed transmission performance. They support a higher signal-to-noise ratio, providing better reliability for current applications and higher data rates for future applications. CAT6 cables reduce crosstalk and system noise. The superior insulation around the 23 AWG copper wires attribute to the increased performance. They can transmit data at 1000 Mbps (1 Gigabit per second) with a frequency of 250 MHz and suitable for 10BASE-T, 100BASE-TX Fast Ethernet and 1000BASE-T / 1000BASE-TX (Gigabit Ethernet).

D-Link Cat6 UTP 23AWG Features

  • 4 Pairs Unshielded Twisted Pair (UTP) Cable
  • Conductor Metal: Solid Bare Copper
  • Color Code: Gray
  • Conductor Diameter: 0.560mm Nominal, 23 AWG
  • Insulation Diameter: 0.970mm Nominal, Insulation Material: HD-PE
  • Jacket Material: PVC UL94V-0/LSZH
  • Cable Diameter: 6mm Nominal
  • PE Central Cross separator
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Watts
Watts
Watts
Watts
Watts
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping