Specifically designed for electronic equipment in harsh power environments, the APC 650VA UPS (BV650I-MS) maximizes productivity and work efficiency while providing critical power during emergencies.
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Audible alarms
Provides notification of changing utility power and UPS power conditions.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
| Settings | APC 650VA UPS (BV650I-MS) remove | APC Smart-UPS C 3000VA Rack mount LCD 230V remove | APC 500VA UPS (BV500I-MSX) remove | APC SMART-UPS RC 2000VA 230V remove | APC BACK UP1400UI UPS remove | APC Smart-UPS,1500VA Rack Mount, LCD 230V with SmartConnect Port remove | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | APC 650VA UPS (BV650I-MS) remove | APC Smart-UPS C 3000VA Rack mount LCD 230V remove | APC 500VA UPS (BV500I-MSX) remove | APC SMART-UPS RC 2000VA 230V remove | APC BACK UP1400UI UPS remove | APC Smart-UPS,1500VA Rack Mount, LCD 230V with SmartConnect Port remove | ||||||||
| Image |  |  |  |  |  |  | ||||||||
| SKU | BV650I-MSX | SMC3000RMI2U | SRC2KI | SMC1500I-2UC | ||||||||||
| Rating | ||||||||||||||
| Price | UGX 338,000 | UGX 7,900,000 | UGX 325,000 | UGX 2,150,000 | UGX 955,000 | UGX 3,170,000 | ||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||
| Add to cart | ||||||||||||||
| Description |
|
|
|
|
|
| ||||||||
| Content | Product DescriptionSpecifically designed for electronic equipment in harsh power environments, the APC 650VA UPS (BV650I-MS) maximizes productivity and work efficiency while providing critical power during emergencies.APC 650VA UPS FeaturesAutomatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Audible alarms Provides notification of changing utility power and UPS power conditions. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. | APC Smart-UPS C 3000VA Rack mount LCD 230V (SMC3000RMI2U)
| Product DescriptionFeatures Maximum configurable power 2000 VA, Green Premium product, Multifunction LCD status and control console, Bypass type Built-in bypass, UPS type Double conversion online, Mounting mode Not rack-mountable, USB compatible Yes, Nb of power socket outlets 4 IEC 60320 C13, Battery type Lead-acid battery.APC Smart-UPS RC 2000VA features
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Management Software
Allows you to easily monitor your utility power and manage your UPS.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
High efficiency
High efficiency rates that remain stable even at lower operating power levels
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
Management Software
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serviceability
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Availability
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manageability
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Intelligent Card Slot
Customize UPS capabilities with management cards.
Serial connectivity
Provides management of the UPS via a serial port.
| Product DescriptionAPC’s back up 1400UI UPS is designed to protect your PC equipment and network connection in difficult power environments. Automatic Voltage Regulation (AVR) adjusts high and low voltage fluctuations to safe levels to protect electronics, saving battery power for when you need it during storms and power outages. Visual and audible indicators allow you to understand the power status. Keep critical electronic equipment running when the power goes out, so you can protect your work and save your data. Equipped with 6 IEC sockets, the APC Back-UPS 1400 with power output capacity of 1400VA / 700 Watts, will keep your desktop computer, monitor or other critical devices (router, modem, television, etc.) running when the power goes out. Specifically designed for electronic equipment in harsh power environments, the Back-UPS 1400 maximizes productivity and work efficiency while providing critical power during emergencies.APC BX1400UI Back-UPS FeaturesLED Indicator and Audible Alarms Quickly understand the unit and power status through visual and audible indicators. Automatic Voltage Regulation (AVR) “Double boost and single trim” AVR instantly corrects voltage fluctuations without using the battery, allowing you to work indefinitely through inconsistent power, saving battery life for outages. 6 Battery Backup and Surge Protected Sockets Keep critical electronic equipment running when the power goes out, so you can protect your work and save your data. USB Connectivity and PowerChute Software Use your computer to access additional power protection and management features:• Preserves your work, shuts down system during outages
• Restarts your system, minimizing work disruptions
• Enables customization of your Back-UPS settings
• Monitors and displays power and battery status
Data Line Surge Protection
Guards against damaging surges and spikes traveling over an analog phone line.
Push Button Circuit Breaker
Provides for easy recovery from circuit overloads and protects your fuse box and electronics from electrical damage.
Automatic Diagnostic Testing
Periodic battery self-test ensures early detection of a battery that needs to be replaced, ensuring your unit is ready when you need it. | Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Pure sine wave output on battery simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
LCD status display provides key UPS status at a glance. Cold-start capable provides temporary battery power when the utility power is out. Temperature-compensated battery charging prolongs battery life by regulating the charge voltage according to battery temperature. Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging.
Product Features
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Pure sine wave output on battery: Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
LCD status display: Provides key UPS status at a glance. LCD status display has multiple status indicators with load and battery bar graphs.
Cold-start capable: Provides temporary battery power when the utility power is out.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Network manageable: Provides remote power management of the UPS over the network.
Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators: Quickly understand unit and power status with visual indicators.
Serial connectivity: Provides management of the UPS via a serial port.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Hot-swappable batteries: Ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers: Enable a quick recovery from overload events.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Adjustable voltage-transfer points: Maximize useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
| |||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||
| Additional information |
|
