UShs 2,150,000
In Stock
SKU: SRC2KI Categories: , ,
  • Main Input Voltage: 230 V
  • Other Input Voltage: 220 V-240 V
  • Main Output Voltage : 230 V
  • Other Output Voltage:  220 V-240 V
  • Rated power in W: 1600 W
  • Rated power in VA: 2000 VA
  • Input Connection Type:  IEC 60320 C14


Product Description

Features Maximum configurable power 2000 VA, Green Premium product, Multifunction LCD status and control console, Bypass type Built-in bypass, UPS type Double conversion online, Mounting mode Not rack-mountable, USB compatible Yes, Nb of power socket outlets 4 IEC 60320 C13, Battery type Lead-acid battery.

APC Smart-UPS RC 2000VA features

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Management Software

Allows you to easily monitor your utility power and manage your UPS.

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

High efficiency

High efficiency rates that remain stable even at lower operating power levels

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

Double conversion on-line topology

Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

Management Software

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.


Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Audible alarms

Provides notification of changing utility power and UPS power conditions


Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.


Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Intelligent Card Slot

Customize UPS capabilities with management cards.

Serial connectivity

Provides management of the UPS via a serial port.
Presentation High density, double-conversion on-line power protection with scalable runtime.
Lead time Usually in Stock
Main Input Voltage 230 V
Other Input Voltage 220 V
240 V
Main Output Voltage 230 V
Other Output Voltage 220 V
240 V
rated power in W 1600 W
rated power in VA 2000 VA
Input Connection Type IEC 60320 C14
nb of power socket outlets 4 IEC 60320 C13
cable length 1.22 m
number of cables 1
battery type Lead-acid battery
provided equipment Basic UPS signalling RS-232 cable
CD with software
User manual
USB cable
Number of power module free slots 0
Number of power module filled slots 0
redundant No
colour Charcoal
height 26 cm
width 14.5 cm
depth 39.7 cm
net weight 18 kg
mounting preference No preference
mounting mode Not rack-mountable
two post mountable 0
USB compatible Yes
mounting position Vertical
network frequency 50/60 Hz
input voltage limits 160…280 V
load power factor 0.8
Maximum configurable power in W 1600 W
harmonic distortion Less than 3 %
output frequency 50/60 Hz +/- 3 Hz sync to mains
50/60 Hz +/- 1 Hz unsynchronised
crest factor 3 : 1
UPS type Double conversion online
Wave type Sine wave
output harmonic distortion < 3% linear load
bypass type Built-in bypass
Maximum configurable power in VA 2000 VA
standards EN 60950
EN/IEC 60950-1
EN/IEC 62040-1
EN/IEC 62040-2
ambient air temperature for operation 0…40 °C
relative humidity 0…95 %
ambient air temperature for storage -20…50 °C
storage Relative Humidity 0…95 %
acoustic level 50 dBA
Batteries & Runtime
Efficiency View Efficiency Graph

number of battery filled slots 1
number of battery free slots 0
Battery recharge time 3 h
additional information Configurable for 220 : 230 or 240 nominal output voltage
battery voltage 48 V
battery charger power 144 W rated
Battery power in VAH 432 VAh runtime
battery life 3…5 year(s)
extended runtime 0
Communications & Management
free slots 1
control panel Multifunction LCD status and control console
alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency power off Yes
Surge Protection and Filtering
Surge energy rate 600 J
noise suppression Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Data line protection RJ45 modem/fax protection (four wire dual line)
Packing Units
Package 1 Weight 19.8 kg
Package 1 Height 23 cm
Package 1 Width 32.5 cm
Package 1 Length 59 cm
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar