It is designed for the Outdoors with weather resistant IP65 case specifically for outdoor installations. It has 2 in 1 mode with AP mode and CPE mode with range up to 3 Kms. It is industrial grade Bridge with great communication efficiency, equipped with Ethernet WAN/LAN port which enhances the sharing of files, photo, audio, video, and gaming experience over wireless network.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It has 2 in 1 mode like AP Mode or CPE mode. AirACE bridge can act as AP as well as Bridge but one at a time.
COMMANDO AirACE Bridge are WEB GUI based easy to use and manage standalone device. It requires minimal configuration, so setup is simple and hassle-free. For wireless clients/users, it can intelligently adjust for compatibility and optimal performance by DFS. Its compact size makes it ideal for Outdoor wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
By setting channel bandwidth up to 20/40MHz can increase the speed of bridge connection up to 300Mbps between bridges.
It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. It comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment with 6KV Lightning Protection with no Ingress of dust as well as waterproof enclosure. These energy efficient Bridges are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.
Auto sensing 10/100Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
It operates quietly, making it ideal for use in virtually any room, office, and terrace. Perfect for noise sensitive environments.
It has POE IN power input which protect from power failures and increases life of device. It comes with Lighting surge protection Common mode 6KV and Differential mode ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance PoE input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.
COMMANDO AirACE Bridge supports software functions as follows.
Displays information of basic setting of device.
A) General Information: This page shows the current status and some basic settings of the device.
B) Statistics: This page shows the packet counters for both transmission and reception over the respective wireless and Ethernet networks.
Used to configure digital feature and view of status code.
System Setting page to configure Country, Time Zone of device.
A) Device Setting: You can set Device Name and Country in this field. Keep the Reset Button and WLAN check Enabled.
B) Time Setting: You can set current time, time zone in this field.
This page configures the IP address, subnet mask, DHCP and other parameters for your local area network that is connected to the LAN port of the device.
Use this page to change the wireless mode as well as configure any associated wireless networks parameter.
User Logout from Web access.
| HARDWARE SPECIFICATION | |||||||||||
| Standard | 802.11a/n | ||||||||||
| RAM | 32-64 MB | ||||||||||
| Flash | 8MB | ||||||||||
| Interface | 1* 10/100Mbps LAN/WAN with POE IN Port | ||||||||||
| Hardware reset button | Reset Button | ||||||||||
| Mode Button | WDS mode Button | ||||||||||
| Power | POE IN 24V, 1 A | ||||||||||
| Antenna | Panel 8-13dBi MIMO Panel antenna. | ||||||||||
| Working Temperature | 0°C to +55°C | ||||||||||
| Working Humidity | 5%~95%RH(Non-condensing) | ||||||||||
| Warranty Period | 1 Year | ||||||||||
| LED Indicator Light | PWR, Diag, Ethernet | ||||||||||
Supports 802.11a/n, with Standalone models with either open or encryption with PoE input Power supply with 24V, 1A POE IN and also have 8-13dBi gain Internal Panel Antenna.
| Standard | 802.11a/n, MIMO technology |
| Interface | 1 * 10/100Mbps RJ45 WAN Port 1 * WDS switch button, press it to do WDS PTP/PTMP connection 1 * DC injector, 12V, 1A 1 * Reset button, press 15 seconds to revert to default setting |
| Power consumption | 24V PoE, <8W |
| Antenna | Build in 8~13dBi MIMO Panel Antenna |
| Size | 260mm * 85 mm * 45mm |
| Memory | 32~64MB DDR2 RAM |
| Flash | 8MB |
| Data Rate | 150~300Mbps |
| Operation Mode | Wireless AP, CPE |
| SSID | Multiple SSID up to 4 |
| Wireless Security | WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP (Dual Access) / PPTP (Dual Access) |
| Parameters | AIR-WB-1K-ACE | AIR-WB5G-3K-ACE |
| Distance Covered | 800M | 3KM |
| Speed of operation | 300Mbps | 300Mbps |
| Frequency band | 2.4GHz | 5GHz |
| IEEE standard | 802.11n | 802.11a/n |
| Power | 20dBm | 23dBm |
| Antenna | Build in 8dBi MIMO Panel | Build in 13dBi MIMO Panel |
| Memory | 32MB DDR2 RAM | 64MB DDR2 RAM |
| Flash | 8MB | 8MB |
| LED Indicator | LED Status |
| Power | Green OFF: No power. Green ON: POE/ DC power given. |
| Diag | Diagnostic Green and Blinking: It shows activity on device. |
| Ethernet | Green and Blinking: It shows activity on Ethernet ports. |
| Digital LED Display | Digital Display Red light: Indicate CPE Mode Red light OFF: Indicate AP mode |
All COMMANDO AirACE series Bridge made available for use globally along with accessory used to facilitate or enhance operations. All COMMANDO AirACE series Bridge Comes with following Accessories.
| Warranty and Support | |||||||||||
| Products covered | COMMANDO AirACE Series Wireless Bridge | ||||||||||
| Warranty duration | One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years. | ||||||||||
| Hardware replacement | COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request. | ||||||||||
| End-of-life policy | In case of discontinuation of the product, support is limited to 3 years from announcement date. | ||||||||||
| Effective date | Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO). | ||||||||||
| Support duration | Lifetime support. | ||||||||||
| COMMANDO Care | COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration. | ||||||||||
| Online Portal Access | Warranty allows guest access to commandonetworks.com for all available technical queries. | ||||||||||
