COMMANDO LightningFIBER Media converter series supports IEEE 802.3 for 10BASE-T/F, IEEE 802.3u for 100BASE-TX/FX, IEEE 802.3 for 10BASE-T/F, IEEE 802.3u for 100BASE-TX/FX. IEEE 802.3i, IEEE 802.3u, IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, 10/100/1000Base-T, 10/100/1000TX, 10GBASE-LR/10GBASE-SR, LC, Multimode, Single-mode with supporting wavelengths 850nm, 1310nm, 1550nm covering distance up to 0.55/3/25/40/60/80/100KM also supported Auto-MDIX function, automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support Link Fault Pass Through function with diagnostic LED for continuous monitoring.
COMMANDO Un-Managed Lightning FIBER Media Converter is fully Compliant with IEEE 802.3i, IEEE 802.3u, IEEE 802.3z, IEEE 802.3x, IEEE 802.3ab, 10/100/1000Base-T, 10/100/1000TX, 10GBASE-LR/10GBASE-SR, LC, Multimode, Single-mode having wavelengths 850nm, 1310nm, 1550nm covering distance up to 0.55/3/25/40/60/80/100 Km depending on the model. COMMANDO Media converters come with LED indicators for PWR, Copper Link/ACT, Fiber FX/TX, and 1000M/100M. It features LFP (Link Fault Pass-through) function for easily tracing the network link failure. LFP function can enhance the integrity and conformity of the Fiber linking to improve the maintainability of the network. It has diagnostic LEDs for understanding status like speed, duplex, and network traffic. It extends the reach of traditional UTP-based LAN from 100m to a distance of 100 Km using Fiber optics media. Making a network compatible with copper and fiber converts a fiber connection from a distant wiring closet to a copper connection, and vice versa.
Fiber is used to carry data to greater distance, copper for cost-effectiveness. Ideal for long Distance Transmission in Broadband Campus Network, Cable TV, Intelligent Broadband FTTX Networks CAMPUS Networks/FTTH networks. It is Interoperable with most of Modems, Hub, Switches, Routers devices with Auto Negotiation and Auto-MDI-X with Ease of installation. Simple Plug and Play installation with no software to configure. Gives small businesses the flexibility of fiber or copper media links .
Auto-negotiation and auto MDIX on each port senses the link speed of a network device (100 and 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Supports full-duplex flow control (IEEE 802.3x). Its compact size makes it ideal for desktops with limited space. LED indicators provide an easy way to monitor network activity. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
COMMANDO Lightning FIBER Media converter series offers a wide range of models for different network deployment requirements. These energy efficient media converter are well built and rigorously tested and having metallic casing to provide the reliability which businesses need.
Almost all existing brand switches and hub are compatible with COMMANDO Media Converters. It extends the reach of traditional UTP based LAN from 100Meters to distance of 100 Km using Fiber optics media.
Simple Plug and Play installation with no software to configure. Gives small businesses the flexibility of fiber or copper media links .
Gigabit Ethernet 1000mbps of data transferring Ethernet RJ45 to SFP Media Converter. With auto MDI/MDI-X for copper port 10/100/1000Mbps auto-negotiation for copper port. Half or full duplex auto-negotiation. It has diagnostic LED’s for continuous monitoring. Plug and Play design simplifies installation with self-adaption. Easy Installation with no setup with Zero Configuration Required. With compact metallic casing, silent design perfect for noise sensitive environments.
Fiber:1×10/100/1000Base-FX (SFP Slot)
|Media Exchange Interface
|Auto-MDI/ MDIX, Full-duplex IEEE802.3x Flow Control
|550meters to 100Km depending on model
|Full wire-speed forwarding rate
|10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-TX: Cat6 or later UTP(≤100 meter)
Single-mode: 3/25/40/60/80/100KM (Depends on SFP module and fiber loss)
• Speed 1000M/100M (for Copper based ports)
• FX/TX (for fiber ports)
• LINK/ACT (for Copper based ports)
|0° to 50°C
|-20° to 70°C
|Operating humidity (relative, non-condensing)
|10% to 90%
|Storage humidity (relative, non-condensing)
|5% to 90%
|Input Power Supply
|5 to 12 V DC, 1A with external power adapter
|Typically 94 x 70.3 x 26.2
|700gm ( Iron shell)
|Emission Certifications (EMI)
|CE, FCC Class A, RoHS, ISO 9001:2015
|NCF, Single Mode
|NCF, Single Mode
All COMMANDO Media converter Series made available for use globally along with accessory used to facilitate or enhance operations. All COMMANDO Media converter Series comes with following Accessories.
|Warranty and Support
|COMMANDO LightningFIBER Media Converters
|Three Year RTB (Return To Base) replacement warranty.
|COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request.
|In case of discontinuation of the product, support is limited to 3 years from announcement date.
|Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).
|COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.
|Online Portal Access
|Warranty allows guest access to commandonetworks.com for all available technical queries.