COMMANDO Passive PoE injector is compact indoor, dual-port which provides DC power for PD devices. It is mostly compatible with AP’s and other equipment supporting Passive PoE pinout (Pins 4/5 Power+ and Pins 7/8 Power-). An over current protection circuit is designed into the Passive PoE injector for added protection of PoE devices used with this injector.
It can be deployed in harsh environments, robust to deliver hassle free power to mission-critical devices. It Combines Electrical Power with a Gigabit Network Connection to Produce a Gigabit Power over Ethernet Signal. It expands network to areas with no Power Lines or Outlets are available with Plug and Play with no configuration required.
Auto-negotiation on each port senses the PD intelligently adjusts as per power requirement with optimal performance. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy installation, Plug-and-play installation with no configuration required.
Auto sensing PD /Auto 10/100 or 10/100/1000M ports with auto MDI / MDIX capabilities which also removes speed and duplex mismatches and automatically detects PD.
Backward PD compatibility saves equipment costs, and make this device future proof. It also allowing a single RJ-45 Ethernet cable to carry both power and data to each device with Giga Ethernet speed . This PoE solution frees network devices from the restrictions of power availability by removing the need for a local power source. This reduces cable clutter, eliminates the need for dedicated electrical outlets in inconvenient places, and cuts down the time required for deployment.
It provides Gigabit Ethernet speed with PoE/PoE+/Ultra PoE++ Injector. It is designed to be deployed in situations where high bandwidth is demanded.
It has dust proof enclosure protects the against harsh outdoor conditions with no Ingress of dust. It can withstand harsh environments, robust to deliver hassle free power.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides, most of the packaging material can be recycled and reused.
| Specification | Description |
| Interface | 10/100/1000Mbps |
| AC Input Power | 100-240V AC, 50-60Hz |
| Output Voltage | 48V-57V |
| Output Power | 12W-90W |
| AC input Power Adjusting range | 90-264VAC, 47-63Hz |
| IEEE802.3af | |
| IEEE 802.3at | |
| IEEE 802.3bt+ Type 4 | |
| Efficiency | ≥90% |
| Short-circuit Protection | |
| Over-load Protection | |
| Over-current Protection | |
| Over-voltage protection | |
| PoE Pin assignments | Pin (4, 5+/7, 8-) |
| Output ripple | 1% max |
| Response time | <1ns |
| Combined load regulation | ±3% |
| Combined line regulation | ±5% |
| Operating temperature | -10 to 50°C |
| Operating humidity | 10 to 95% non-condensing |
| Product Code | Interface Speed | Standard Supported | PoE support | Injector Type |
| CMD-POE-15.4W-AF | 10/100/1000Mbps | IEEE 802.3af | Max 15.4W | Active |
| CMD-POE-30W-AT | 10/100/1000Mbps | IEEE 802.3at | Max 30W | Active |
| CMD-POE-90W-BT | 10/100/1000Mbps | IEEE 802.3bt Type 4 | Max 90W | Active |
| CMD-FPOE-24V-0.5A | 10/100Mbps | - | Max Power 24VDC @ 0.5A | Passive |
| CMD-FPOE-24V-1A | 10/100Mbps | - | Max Power 24VDC @ 1A | Passive |
| CMD-FPOE-48V-0.5A | 10/100Mbps | - | Max Power 48VDC @ 0.5A | Passive |
| CMD-POE-12V-1A | 10/100/1000Mbps | - | Max Power 12VDC @ 1A | Passive |
| CMD-POE-24V-0.5A | 10/100/1000Mbps | - | Max Power 24VDC @ 0.5A | Passive |
| CMD-POE-24V-1A | 10/100/1000Mbps | - | Max Power 24VDC @ 1A | Passive |
| LED Indication | LED Status |
| AC Power not given to PoE Injector. | |
| Green or Blue ON: AC Power provided. | |
| Active | OFF: Not connected to PD. Blue ON: PoE Power is given to PD. |
All COMMANDO PoE injector are made available for use globally along with accessories in the bundle to facilitate for enhance operations.
The switch box comes included with the following accessories:
COMMANDO PoE injector come with One-year replacement warranty and lifetime support.
| Warranty and Support | |||||||||||
| Products covered | COMMANDO LightningPOWER PoE Injectors | ||||||||||
| Warranty duration | One Year RTB (Return To Base) replacement warranty. | ||||||||||
| Hardware replacement | COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request. | ||||||||||
| End-of-life policy | In case of discontinuation of the product, support is limited to 3 years from announcement date. | ||||||||||
| Effective date | Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO). | ||||||||||
| Support duration | Lifetime support. | ||||||||||
| COMMANDO Care | COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration. | ||||||||||
| Online Portal Access | Warranty allows guest access to commandonetworks.com for all available technical queries. | ||||||||||
| Settings | COMMANDO LightningPOWER 10/100Mbps, remove | COMMANDO Scout E1000 16GE, remove | COMMANDO Soldier C2000 24GE PoE+ remove | COMMANDO Scout E1000 16GE PoE+, remove | COMMANDO Soldier C2000 16GE PoE+ remove | COMMANDO Scout E1000 4FE PoE+, remove |
|---|---|---|---|---|---|---|
| Name | COMMANDO LightningPOWER 10/100Mbps, remove | COMMANDO Scout E1000 16GE, remove | COMMANDO Soldier C2000 24GE PoE+ remove | COMMANDO Scout E1000 16GE PoE+, remove | COMMANDO Soldier C2000 16GE PoE+ remove | COMMANDO Scout E1000 4FE PoE+, remove |
| Image |  |  |  |  |  |  |
| SKU | CMD-FPOE-24V-0.5A | E1000-16G+4CF | C2000-24GP+8CF | E1000-16GP+8CF | C2000-16GP+8CF | E1000-4P+2FE |
| Rating | ||||||
| Price | UGX 54,000 | UGX 736,000 | UGX 2,704,000 | UGX 1,120,000 | UGX 2,030,000 | UGX 195,000 |
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
|
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Add to cart | ||||||
| Description | COMMANDO Scout E1000 16GE, 2GE+2SFP Uplinks, Unmanaged Switch. | COMMANDO Soldier C2000 24GE, 4GE/4SFP Combo Uplinks, Managed Switch. | COMMANDO Scout E1000 16GE PoE+, 4GE/4SFP Combo Uplinks, 260W, Unmanaged Switch. | COMMANDO Soldier C2000 16GE PoE+, 4GE/4SFP Combo Uplinks, 290W, Managed Switch. | COMMANDO Scout E1000 4FE PoE+, 2FE Uplinks, 75W, Unmanaged Switch. | |
| Content | Product Highlights• Solution for Power for PoE/PoE+/Ultra PoE++ devices, as all are backward compatible with flexibility of power adaption
• Delivers power and data over the single cable
• 2*100Mbps RJ45 Ports with 1 PoE with IEEE 802.3af/at/bt compliant
• Auto-determine the PD power requirements with advanced Auto-Sensing Algorithm
• Supports cable up to 100 meters with Giga Ethernet speed
• Cost Saving, no power cabling for Ethernet network device
• IEEE 802.3bt/at/af Compliant, Up to 90W Power backward compatible with 30W and 15.4W.
• Auto-determine the necessary power requirements, Power classification as per need.
• Compact Design, High Safety with Short Circuit Protection
• Quick and Easy Installation. Plug-and-play installation, requires no configuration
• Comes with One Year warranty
Features And BenefitsEasy to UseAuto-negotiation on each port senses the PD intelligently adjusts as per power requirement with optimal performance. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy installation, Plug-and-play installation with no configuration required.Auto PD detection with MDI / MDIX CapabilitiesAuto sensing PD /Auto 10/100 or 10/100/1000M ports with auto MDI / MDIX capabilities which also removes speed and duplex mismatches and automatically detects PD.Cost EfficientBackward PD compatibility saves equipment costs, and make this device future proof. It also allowing a single RJ-45 Ethernet cable to carry both power and data to each device with Giga Ethernet speed . This PoE solution frees network devices from the restrictions of power availability by removing the need for a local power source. This reduces cable clutter, eliminates the need for dedicated electrical outlets in inconvenient places, and cuts down the time required for deployment.High Speed ConnectivityIt provides Gigabit Ethernet speed with PoE/PoE+/Ultra PoE++ Injector. It is designed to be deployed in situations where high bandwidth is demanded.Dust proof EnclosureIt has dust proof enclosure protects the against harsh outdoor conditions with no Ingress of dust. It can withstand harsh environments, robust to deliver hassle free power.Green TechnologyIt features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides, most of the packaging material can be recycled and reused.HardwarePhysical Ports and Networking Interfaces• 1 * Power Connector with power Input AC 100~ 240V, 50~ 60Hz
• 1 * 10/100/1000 Mbps Ethernet LAN Port
•1 * 10/100/1000 Mbps Ethernet for PoE/PoE+/Ultra PoE++ Port
Standards Compliance•IEEE802.3, IEEE802.3u, IEEE 802.3ab, IEEE802.3az , 10/100/1000Base-T Ethernet
•IEEE802.3af/ IEEE802.3at/ IEEE802.3bt Power over Ethernet (PoE)
Ethernet Pin Usage• Data: Pin No. 1,2,3,6
• Power: Pin No. 4 & 5 (V+), 7 & 8 (V-)
LED Indicator• Power, Active
Environmental Specifications• Operating Temperature:-10º C to 50 º C
•Storage Temperature:-20 º C to 60 º C
• Operating Humidity: 10% to 95%
• Storage Humidity: 10% to 95%
Extra Long Operational life•High Quality enclosure to withstand
•Harsh Outdoor Climates with dust proof ensuring it can with stand harsh outdoor and indoor environments.
•Support temperature range -10º C to 50 º C
| Product OverviewCOMMANDO Scout E1000 Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, Internet cafes, hotels, schools, and suitable for surveillance. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+ with power budget up to 600W capability while reducing energy consumption and minimizing noise. This Series switches are available in 4 to 48 Gigabit Ethernet ports or 4 to 48 Fast Ethernet Ports with 2/4 fixed 1GE copper/ 1G Fiber Uplinks having enclosure type desktop, rack/wall mountable- 1U depending on switch model. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations. It can be quickly set up with plug and play with Zero Touch Provisioning. It is unmanaged SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250m cable distance. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity. It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected. It can also set any ports that are not transmitting traffic to sleep mode.Product Highlights•4 to 48 x 10/100Mbps or 10/100/1000Mbps Ethernet Ports along with fixed 1G fiber/1G copper Uplinks and PoE/PoE+ and non PoE Models.
•Extra 2/4 Ports slots with separate, fixed 1G Fiber/ 1GE Copper Switchports or Uplinks.
•Power over Ethernet (PoE) / Power over Ethernet plus (PoE+) models to provide power on all ports to IEEE 802.3af and IEEE 802.3at (15.4W, 30W) capable devices including Wireless AP, Bridges, IoT etc. according to the power budget Up to 600 W along with backward compatibility.
•All ports have PoE/PoE+ capability and 30W Max Per port.
•PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•Backplane Bandwidth: 1.2Gbps-56Gbps
•MAC address Table: 8000 entries
•MAC Address Auto-Learning and Auto-Aging
•Easy Installation, Plug-and-play installation with no configuration required
•Support Store-and-forward Switching
•Enclosure Type Desktop, Rack/Wall mountable - 1U.
•Surge protection ±4 kV
•All ports support jumbo frame of size 10000 bytes transmission.
•All 4 to 48 ports support auto-negotiation and auto MDI/MDIX.
•All ports capable of Gigabit Ethernet connections and provide full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX) model based.
•Plug and Play design simplifies installation with self-adaption.
•Desktop as well standard rack mountable option along with fan or fan-less option, silent design with Small form-factor. Perfect for noise sensitive environments.
•Energy-Saving by Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•With Zero Touch Provisioning: Plug and play and no setup.
•Affordable, Easy-to-Use Switches for Small Business Networks, with Zero Configuration Required
•Comes with one-year default warranty – optionally extendable up to 3 years.
Features And BenefitsEasy to UseCOMMANDO Scout E1000 Series Switches are easy to use and manage. All switches are Plug-and-Play devices that requires zero configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops as well as rackmount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.PoE/PoE+ CapabilitiesScout E1000 Series Switches are high power switches and support 75W up to 600W (PoE/PoE+) Power Budget. This Series switches smartly adjust IEEE802.3af / IEEE802.3at PoE/PoE+ (up to 30 Watts per port). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.Auto MDIX CapabilitiesAuto sensing/Auto PoE/PoE+ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.Compact and Silent PerformanceIt comes with one or two fans or fan-less models with Small form-factor, compact PoE/PoE+ switch operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.Compact design with flexibility of additional portsIt Provides additional deployment flexibility, fiber connectivity with separate extra flexible ports or combo ports options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Support uninterrupted critical network infrastructureIt has AC input power which protect from power surges through their inline power supply automatically and have in build Surge protection of ±4KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.Cost EfficientState of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.Green TechnologyIt features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.HardwareCOMMANDO Scout E1000 Series Unmanaged Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.Solid performance with non-blocking architecture•CPU Dual Core having frequency 500 MHz along with packet Buffer memory of 4.1MB.
•All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
•Solid performance with non-blocking architecture, 8000 entries MAC Address Table with 4-way hashing algorithm.
•Maximum packet length 10000 bytes.
•Jumbo frames of 10000 bytes.
•2-hash algorithm selection for L2 table searching/learning with Aging timer range from 0.2s to 1600000s.
•Switching Capacity: up to 56Gbps
•Forwarding Capacity: Up to 41.66Mpps
•Store-and-forward Switching Scheme.
Physical Ports and Networking Interfaces•Up to 48 x 10/100 or 10/100/1000 Mbps Rj45 Ethernet Ports with separate ports 2/4 GE (RJ-45) and 2/4 SFP and also combo port option 4 GE (RJ-45) or 4 SFP in some models. Extra separate 2/4 Ports with flexible 1G Fiber/ 1GE Copper Switchports /Uplinks.
•LED Indicators: Power, Link/Act, PoE Max.
IEEE 802.3af/at Compliant Power over Ethernet•Various power budget options like 75W, 150W, 260W, 450W and 600W with 30W Max Per port (PoE/PoE+). POE power supply transmission is more reliable due to design of robust network transformer which uses high current. All PoE/PoE+ ports are IEEE 802.3af-compliant PoE, IEEE802.3at-compliant PoE+. Each port delivers 15.4 W PoE, 30 W PoE+ power. PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
Extra Long operational life•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Support temperature range 0° C to 55° C
•Surge protection up to ±4KV to designed to automatically protect Switches from surge events by limiting transient voltages and diverting surge currents.
•Long life electrolytic capacitance to increase the operational life of switches. RJ45 Gold plated with 3U thickness.
•Rack and Wall mount design that enables to mounts in an EIA Standard 19-inch telco rack or equipment cabinet along with Rack-mounting kit available with device. Which enables horizontal surface mounting, wall mounting and also having durable robust metal body.
Green Energy and Noise-free Operation•Comply with IEEE 802.3az (Energy-Efficient Ethernet) standard, reduces power consumption up to 58% and reduce the noise pollution. Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state.
•Automatic Temperature Controlled Fans using Temperature Small form-factor, fan-less as well fan design for silent operation. Perfect for noise sensitive environments.
•Temperature Control Fan to optimize cooling and noise with bilateral heat dissipation.
Ethernet ProtocolsSupports wide range of IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, IEEE802.3af, Power over Ethernet, IEEE802.3at, Power over Ethernet plus.Enterprise High reliability design and high quality product•Very high Quality as for all Mean Time Before Failure of system, MTBF >2,00,000 hours
•Stability: 64-bit packet, time delay < 10us, packet loss rate: 0
•Restorability of Network shaking or device breakdown, restart(recovery) time < 60sec.
•RoHS Compliant with most of the packaging material can be recycled and reused.
| SOFTWARE FEATURE SET (SOLDIEROS L2+)Highlights:• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
L3 Features:• L3 Static/Default Route
• Gratuitous ARP
• IPv6
L2 Features:• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN - IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror - Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
QoS Features:• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
Security Features:• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
Management Features:• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
| Product OverviewCOMMANDO Scout E1000 Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, Internet cafes, hotels, schools, and suitable for surveillance. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+ with power budget up to 600W capability while reducing energy consumption and minimizing noise. This Series switches are available in 4 to 48 Gigabit Ethernet ports or 4 to 48 Fast Ethernet Ports with 2/4 fixed 1GE copper/ 1G Fiber Uplinks having enclosure type desktop, rack/wall mountable- 1U depending on switch model. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations. It can be quickly set up with plug and play with Zero Touch Provisioning. It is unmanaged SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250m cable distance. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity. It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected. It can also set any ports that are not transmitting traffic to sleep mode.Product Highlights•4 to 48 x 10/100Mbps or 10/100/1000Mbps Ethernet Ports along with fixed 1G fiber/1G copper Uplinks and PoE/PoE+ and non PoE Models.
•Extra 2/4 Ports slots with separate, fixed 1G Fiber/ 1GE Copper Switchports or Uplinks.
•Power over Ethernet (PoE) / Power over Ethernet plus (PoE+) models to provide power on all ports to IEEE 802.3af and IEEE 802.3at (15.4W, 30W) capable devices including Wireless AP, Bridges, IoT etc. according to the power budget Up to 600 W along with backward compatibility.
•All ports have PoE/PoE+ capability and 30W Max Per port.
•PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•Backplane Bandwidth: 1.2Gbps-56Gbps
•MAC address Table: 8000 entries
•MAC Address Auto-Learning and Auto-Aging
•Easy Installation, Plug-and-play installation with no configuration required
•Support Store-and-forward Switching
•Enclosure Type Desktop, Rack/Wall mountable - 1U.
•Surge protection ±4 kV
•All ports support jumbo frame of size 10000 bytes transmission.
•All 4 to 48 ports support auto-negotiation and auto MDI/MDIX.
•All ports capable of Gigabit Ethernet connections and provide full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX) model based.
•Plug and Play design simplifies installation with self-adaption.
•Desktop as well standard rack mountable option along with fan or fan-less option, silent design with Small form-factor. Perfect for noise sensitive environments.
•Energy-Saving by Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•With Zero Touch Provisioning: Plug and play and no setup.
•Affordable, Easy-to-Use Switches for Small Business Networks, with Zero Configuration Required
•Comes with one-year default warranty – optionally extendable up to 3 years.
Features And BenefitsEasy to UseCOMMANDO Scout E1000 Series Switches are easy to use and manage. All switches are Plug-and-Play devices that requires zero configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops as well as rackmount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.PoE/PoE+ CapabilitiesScout E1000 Series Switches are high power switches and support 75W up to 600W (PoE/PoE+) Power Budget. This Series switches smartly adjust IEEE802.3af / IEEE802.3at PoE/PoE+ (up to 30 Watts per port). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.Auto MDIX CapabilitiesAuto sensing/Auto PoE/PoE+ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.Compact and Silent PerformanceIt comes with one or two fans or fan-less models with Small form-factor, compact PoE/PoE+ switch operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.Compact design with flexibility of additional portsIt Provides additional deployment flexibility, fiber connectivity with separate extra flexible ports or combo ports options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Support uninterrupted critical network infrastructureIt has AC input power which protect from power surges through their inline power supply automatically and have in build Surge protection of ±4KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.Cost EfficientState of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.Green TechnologyIt features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.HardwareCOMMANDO Scout E1000 Series Unmanaged Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.Solid performance with non-blocking architecture•CPU Dual Core having frequency 500 MHz along with packet Buffer memory of 4.1MB.
•All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
•Solid performance with non-blocking architecture, 8000 entries MAC Address Table with 4-way hashing algorithm.
•Maximum packet length 10000 bytes.
•Jumbo frames of 10000 bytes.
•2-hash algorithm selection for L2 table searching/learning with Aging timer range from 0.2s to 1600000s.
•Switching Capacity: up to 56Gbps
•Forwarding Capacity: Up to 41.66Mpps
•Store-and-forward Switching Scheme.
Physical Ports and Networking Interfaces•Up to 48 x 10/100 or 10/100/1000 Mbps Rj45 Ethernet Ports with separate ports 2/4 GE (RJ-45) and 2/4 SFP and also combo port option 4 GE (RJ-45) or 4 SFP in some models. Extra separate 2/4 Ports with flexible 1G Fiber/ 1GE Copper Switchports /Uplinks.
•LED Indicators: Power, Link/Act, PoE Max.
IEEE 802.3af/at Compliant Power over Ethernet•Various power budget options like 75W, 150W, 260W, 450W and 600W with 30W Max Per port (PoE/PoE+). POE power supply transmission is more reliable due to design of robust network transformer which uses high current. All PoE/PoE+ ports are IEEE 802.3af-compliant PoE, IEEE802.3at-compliant PoE+. Each port delivers 15.4 W PoE, 30 W PoE+ power. PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
Extra Long operational life•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Support temperature range 0° C to 55° C
•Surge protection up to ±4KV to designed to automatically protect Switches from surge events by limiting transient voltages and diverting surge currents.
•Long life electrolytic capacitance to increase the operational life of switches. RJ45 Gold plated with 3U thickness.
•Rack and Wall mount design that enables to mounts in an EIA Standard 19-inch telco rack or equipment cabinet along with Rack-mounting kit available with device. Which enables horizontal surface mounting, wall mounting and also having durable robust metal body.
Green Energy and Noise-free Operation•Comply with IEEE 802.3az (Energy-Efficient Ethernet) standard, reduces power consumption up to 58% and reduce the noise pollution. Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state.
•Automatic Temperature Controlled Fans using Temperature Small form-factor, fan-less as well fan design for silent operation. Perfect for noise sensitive environments.
•Temperature Control Fan to optimize cooling and noise with bilateral heat dissipation.
Ethernet ProtocolsSupports wide range of IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, IEEE802.3af, Power over Ethernet, IEEE802.3at, Power over Ethernet plus.Enterprise High reliability design and high quality product•Very high Quality as for all Mean Time Before Failure of system, MTBF >2,00,000 hours
•Stability: 64-bit packet, time delay < 10us, packet loss rate: 0
•Restorability of Network shaking or device breakdown, restart(recovery) time < 60sec.
•RoHS Compliant with most of the packaging material can be recycled and reused.
| SOFTWARE FEATURE SET (SOLDIEROS L2+)Highlights:• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
L3 Features:• L3 Static/Default Route
• Gratuitous ARP
• IPv6
L2 Features:• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN - IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror - Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
QoS Features:• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
Security Features:• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
Management Features:• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
|
COMMANDO Scout E1000 Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, Internet cafes, hotels, schools, and suitable for surveillance. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+ with power budget up to 600W capability while reducing energy consumption and minimizing noise. This Series switches are available in 4 to 48 Gigabit Ethernet ports or 4 to 48 Fast Ethernet Ports with 2/4 fixed 1GE copper/ 1G Fiber Uplinks having enclosure type desktop, rack/wall mountable- 1U depending on switch model. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations.
It can be quickly set up with plug and play with Zero Touch Provisioning. It is unmanaged SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250m cable distance.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected. It can also set any ports that are not transmitting traffic to sleep mode.
Product Highlights•4 to 48 x 10/100Mbps or 10/100/1000Mbps Ethernet Ports along with fixed 1G fiber/1G copper Uplinks and PoE/PoE+ and non PoE Models.
•Extra 2/4 Ports slots with separate, fixed 1G Fiber/ 1GE Copper Switchports or Uplinks.
•Power over Ethernet (PoE) / Power over Ethernet plus (PoE+) models to provide power on all ports to IEEE 802.3af and IEEE 802.3at (15.4W, 30W) capable devices including Wireless AP, Bridges, IoT etc. according to the power budget Up to 600 W along with backward compatibility.
•All ports have PoE/PoE+ capability and 30W Max Per port.
•PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•Backplane Bandwidth: 1.2Gbps-56Gbps
•MAC address Table: 8000 entries
•MAC Address Auto-Learning and Auto-Aging
•Easy Installation, Plug-and-play installation with no configuration required
•Support Store-and-forward Switching
•Enclosure Type Desktop, Rack/Wall mountable - 1U.
•Surge protection ±4 kV
•All ports support jumbo frame of size 10000 bytes transmission.
•All 4 to 48 ports support auto-negotiation and auto MDI/MDIX.
•All ports capable of Gigabit Ethernet connections and provide full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX) model based.
•Plug and Play design simplifies installation with self-adaption.
•Desktop as well standard rack mountable option along with fan or fan-less option, silent design with Small form-factor. Perfect for noise sensitive environments.
•Energy-Saving by Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•With Zero Touch Provisioning: Plug and play and no setup.
•Affordable, Easy-to-Use Switches for Small Business Networks, with Zero Configuration Required
•Comes with one-year default warranty – optionally extendable up to 3 years.
Features And BenefitsEasy to UseCOMMANDO Scout E1000 Series Switches are easy to use and manage. All switches are Plug-and-Play devices that requires zero configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops as well as rackmount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.PoE/PoE+ CapabilitiesScout E1000 Series Switches are high power switches and support 75W up to 600W (PoE/PoE+) Power Budget. This Series switches smartly adjust IEEE802.3af / IEEE802.3at PoE/PoE+ (up to 30 Watts per port). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.Auto MDIX CapabilitiesAuto sensing/Auto PoE/PoE+ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.Compact and Silent PerformanceIt comes with one or two fans or fan-less models with Small form-factor, compact PoE/PoE+ switch operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.Compact design with flexibility of additional portsIt Provides additional deployment flexibility, fiber connectivity with separate extra flexible ports or combo ports options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Support uninterrupted critical network infrastructureIt has AC input power which protect from power surges through their inline power supply automatically and have in build Surge protection of ±4KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.Cost EfficientState of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.Green TechnologyIt features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.HardwareCOMMANDO Scout E1000 Series Unmanaged Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.Solid performance with non-blocking architecture•CPU Dual Core having frequency 500 MHz along with packet Buffer memory of 4.1MB.
•All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
•Solid performance with non-blocking architecture, 8000 entries MAC Address Table with 4-way hashing algorithm.
•Maximum packet length 10000 bytes.
•Jumbo frames of 10000 bytes.
•2-hash algorithm selection for L2 table searching/learning with Aging timer range from 0.2s to 1600000s.
•Switching Capacity: up to 56Gbps
•Forwarding Capacity: Up to 41.66Mpps
•Store-and-forward Switching Scheme.
Physical Ports and Networking Interfaces•Up to 48 x 10/100 or 10/100/1000 Mbps Rj45 Ethernet Ports with separate ports 2/4 GE (RJ-45) and 2/4 SFP and also combo port option 4 GE (RJ-45) or 4 SFP in some models. Extra separate 2/4 Ports with flexible 1G Fiber/ 1GE Copper Switchports /Uplinks.
•LED Indicators: Power, Link/Act, PoE Max.
IEEE 802.3af/at Compliant Power over Ethernet•Various power budget options like 75W, 150W, 260W, 450W and 600W with 30W Max Per port (PoE/PoE+). POE power supply transmission is more reliable due to design of robust network transformer which uses high current. All PoE/PoE+ ports are IEEE 802.3af-compliant PoE, IEEE802.3at-compliant PoE+. Each port delivers 15.4 W PoE, 30 W PoE+ power. PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
Extra Long operational life•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Support temperature range 0° C to 55° C
•Surge protection up to ±4KV to designed to automatically protect Switches from surge events by limiting transient voltages and diverting surge currents.
•Long life electrolytic capacitance to increase the operational life of switches. RJ45 Gold plated with 3U thickness.
•Rack and Wall mount design that enables to mounts in an EIA Standard 19-inch telco rack or equipment cabinet along with Rack-mounting kit available with device. Which enables horizontal surface mounting, wall mounting and also having durable robust metal body.
Green Energy and Noise-free Operation•Comply with IEEE 802.3az (Energy-Efficient Ethernet) standard, reduces power consumption up to 58% and reduce the noise pollution. Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state.
•Automatic Temperature Controlled Fans using Temperature Small form-factor, fan-less as well fan design for silent operation. Perfect for noise sensitive environments.
•Temperature Control Fan to optimize cooling and noise with bilateral heat dissipation.
Ethernet ProtocolsSupports wide range of IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, IEEE802.3af, Power over Ethernet, IEEE802.3at, Power over Ethernet plus.Enterprise High reliability design and high quality product•Very high Quality as for all Mean Time Before Failure of system, MTBF >2,00,000 hours
•Stability: 64-bit packet, time delay < 10us, packet loss rate: 0
•Restorability of Network shaking or device breakdown, restart(recovery) time < 60sec.
•RoHS Compliant with most of the packaging material can be recycled and reused.
|
| Weight | N/A | N/A | N/A | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
