This workgroup switch of the xStack series for Layer3 environments has 48x 10 / 100Mbit twisted pair ports. For connection to other switches, the DES-3852/E has 2 combo 1000Mbit twisted pair ports, which can optionally be converted into 1000Mbit fiber connections via additional mini GBIC SFP modules. Two additional gigabit copper ports are available on the rear for cascading the devices.
All four Gigabit copper combo ports can be connected to the backbone individually or as a trunk. Thanks to the favorable ratio of Gigabit Uplink bandwidth and a large number of Fast Ethernet connections, this Layer3 Virtual Stack Switch is ideal for workgroups or departments.
Reliable data transfer in time-critical applications is ensured by the possibility of bandwidth control. The data throughput can be defined for each individual port and, depending on the user, the network access can also be controlled separately. This prioritization ensures control of data transfer in the network, prevents unwanted data access and allows easy management of different applications; Including VoIP, web browsing, video and e-mail.
With the help of the implemented SIM protocol, the DES-3852/E can form virtual stacks with one another or with other SIM-capable devices using switches of the DES-3800 series. The supervision, Maintenance and configuration of the switches via a single IP address simplifies and speeds up recurring management tasks considerably. Network access
Advanced L3 Routing
The xStack DES-3852/E is a high performance Layer 3 switch that provides an ideal solution by offering advanced Layer 3 routing features such as RIP, OSPF, VRRP, up to 10 IP addresses per VLAN, and floating static routes. Multi-path Routing*, which is the method of establishing multiple paths between given source-destination nodes within a network, is also a feature supported on the xStack DES-3852/E. These added routing features provide redundancy, improve network utilization, and provide load balancing for the network.
Metro Switching
Service provider networks are moving from circuit-based access to newer packet-based access that requires highly reliable intelligent switching and demands resiliency and dependability. The xStack DES-3852/E meets this demand by supporting industry standards for 802.1s (Multiple Spanning Tree), 802.3ad link aggregation for up to 32 groups, bandwidth rate limiting down to 64k, and support for an external redundant power option for added peace of mind. In addition, the xStack DES-3852/E offers Double VLAN Q-in-Q tagging, which adds on an additional tag to a VLAN tag, expanding the VLAN space and allowing service providers to deploy their service quickly and securely. The xStack DES-3852/E also incorporates advanced QoS support such as the ability to filter and forward traffic based on Layer 2/3/4, making it an ideal choice for VoIP, video, and audio services targeting business class customers.
Network Security
The xStack DES-3852/E is equipped to handle many of today’s emerging security vulnerabilities. Up to 800 independent access control lists can be configured with the ability to filter and block traffic based on such criteria as: Port, MAC, 802.1p priority, VLAN, DSCP, IP address, Protocol type, and TCP/UDP port number and content, proving that the xStack DES-3852/E provides unparalleled security in its class. In addition, the xStack DES-3852/E incorporates 802.1x Port-based and MAC-based RADIUS authentication for secure network logins and SSH/SSL for increased management security. Further, the xStack DES-3852/E incorporates IP-MAC-Port Binding and the D-Link Safeguard Engine to protect the CPU from broadcast, multicast, and unicast flooding.
Specifications
| Settings | D-Link 48-Port L3 Virtual Stack Switch (DES-3852/E) remove | COMMANDO Soldier C3000 24GE PoE+, remove | COMMANDO Soldier E2000 24GE PoE+ remove | COMMANDO Scout E1000 16GE, remove | 8 Port Gigabit Unmanaged POE Switch remove | COMMANDO Soldier C2000 24GE PoE+ remove |
|---|---|---|---|---|---|---|
| Name | D-Link 48-Port L3 Virtual Stack Switch (DES-3852/E) remove | COMMANDO Soldier C3000 24GE PoE+, remove | COMMANDO Soldier E2000 24GE PoE+ remove | COMMANDO Scout E1000 16GE, remove | 8 Port Gigabit Unmanaged POE Switch remove | COMMANDO Soldier C2000 24GE PoE+ remove |
| Image |  |  |  |  |  |  |
| SKU | C3000-24GP+4X | E2000-24GP+8CF | E1000-16G+4CF | DS-3E0510P-E/M | C2000-24GP+8CF | |
| Rating | ||||||
| Price | UGX 5,755,000 | UGX 3,911,000 | UGX 1,763,000 | UGX 736,000 | UGX 303,000 | UGX 2,704,000 |
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
|
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Add to cart | ||||||
| Description |
| COMMANDO Soldier C3000 24GE PoE+, 4x 10G SFP+ Uplinks, 600W Max, Routing Switch. | COMMANDO Scout E1000 16GE, 2GE+2SFP Uplinks, Unmanaged Switch. | 8 Port Gigabit Unmanaged POE Switch Features.
| COMMANDO Soldier C2000 24GE, 4GE/4SFP Combo Uplinks, Managed Switch. | |
| Content | Product DescriptionThis workgroup switch of the xStack series for Layer3 environments has 48x 10 / 100Mbit twisted pair ports. For connection to other switches, the DES-3852/E has 2 combo 1000Mbit twisted pair ports, which can optionally be converted into 1000Mbit fiber connections via additional mini GBIC SFP modules. Two additional gigabit copper ports are available on the rear for cascading the devices. All four Gigabit copper combo ports can be connected to the backbone individually or as a trunk. Thanks to the favorable ratio of Gigabit Uplink bandwidth and a large number of Fast Ethernet connections, this Layer3 Virtual Stack Switch is ideal for workgroups or departments. Reliable data transfer in time-critical applications is ensured by the possibility of bandwidth control. The data throughput can be defined for each individual port and, depending on the user, the network access can also be controlled separately. This prioritization ensures control of data transfer in the network, prevents unwanted data access and allows easy management of different applications; Including VoIP, web browsing, video and e-mail. With the help of the implemented SIM protocol, the DES-3852/E can form virtual stacks with one another or with other SIM-capable devices using switches of the DES-3800 series. The supervision, Maintenance and configuration of the switches via a single IP address simplifies and speeds up recurring management tasks considerably. Network accessAdvanced L3 Routing The xStack DES-3852/E is a high performance Layer 3 switch that provides an ideal solution by offering advanced Layer 3 routing features such as RIP, OSPF, VRRP, up to 10 IP addresses per VLAN, and floating static routes. Multi-path Routing*, which is the method of establishing multiple paths between given source-destination nodes within a network, is also a feature supported on the xStack DES-3852/E. These added routing features provide redundancy, improve network utilization, and provide load balancing for the network.
Metro Switching Service provider networks are moving from circuit-based access to newer packet-based access that requires highly reliable intelligent switching and demands resiliency and dependability. The xStack DES-3852/E meets this demand by supporting industry standards for 802.1s (Multiple Spanning Tree), 802.3ad link aggregation for up to 32 groups, bandwidth rate limiting down to 64k, and support for an external redundant power option for added peace of mind. In addition, the xStack DES-3852/E offers Double VLAN Q-in-Q tagging, which adds on an additional tag to a VLAN tag, expanding the VLAN space and allowing service providers to deploy their service quickly and securely. The xStack DES-3852/E also incorporates advanced QoS support such as the ability to filter and forward traffic based on Layer 2/3/4, making it an ideal choice for VoIP, video, and audio services targeting business class customers. Network Security The xStack DES-3852/E is equipped to handle many of today’s emerging security vulnerabilities. Up to 800 independent access control lists can be configured with the ability to filter and block traffic based on such criteria as: Port, MAC, 802.1p priority, VLAN, DSCP, IP address, Protocol type, and TCP/UDP port number and content, proving that the xStack DES-3852/E provides unparalleled security in its class. In addition, the xStack DES-3852/E incorporates 802.1x Port-based and MAC-based RADIUS authentication for secure network logins and SSH/SSL for increased management security. Further, the xStack DES-3852/E incorporates IP-MAC-Port Binding and the D-Link Safeguard Engine to protect the CPU from broadcast, multicast, and unicast flooding. | HARDWARE HIGHLIGHTS• SOFTWARE FEATURE SET
L3 Features• Static Route
• Dynamic Routing, RIPv1/v2, OSPF v1/v2
• Policy-based Routing (PBR) for IPv4 and IPv6
• VRRP
• IGMP v1/v2/v3, IGMP Proxy
• Static Multicast Route
• Multicast Receive Control
• Illegal Multicast Source Detect
• ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP Limit
• Dynamic ARP Inspection (DAI)
• DNS Server, Client, DNS Relay
IPv6 Features• ICMPv6, ND, DNSv6
• MLD Snooping, IPv6 Multicast VLAN
• MLDv1/v2, IPv6 ACL, IPv6 QoS
QoS• 13 Queues
• SP, WRR
• Traffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port number
• Traffic Policing
• PRI Mark/Remark
• Surveillance VLAN
ACL• IP ACL, MAC ACL, IP-MAC ACL
• Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol,
• TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS
• REDIRECT and Accounting based ACL
• Rules can be configured to port, VLAN, VLAN routing interfaces
• Time Ranged ACL
Security• 802.1x AAA
• Port, MAC based authentication
• Accounting based on time length and traffic
• Guest VLAN and auto VLAN
• RADIUS for IPv4 and IPv6
• TACACS+ for IPv4 and IPv6
DHCPv4/v6 Traffic Monitor• DHCP Server/Client for IPv4/IPv6
• DHCP Relay/Option 82
• DHCP Snooping/Option 82
Tunneling• L3 GRE
• 6 to 4
• ISATAP
• IP-in-IP
• Configured Tunnel
L1, L2 Features• IEEE802.3(10Base-T)
• IEEE802.3u(100Base-TX)
• IEEE802.3z(1000BASE-X)
• IEEE802.3ab(1000Base-T)
• IEEE802.3ae(10GBase), IEEE802.3x
• IEEE802.3an (10GBASE-T)
• Port loopback detection
• LLDP and LLDP-MED
• UDLD
• 802.3ad LACP, 26 Trunk group with max 8 ports
• LACP load balance
• N:1 Port Mirroring
• RSPAN
• ERSPAN
• IEEEE802.1d(STP)
• IEEEE802.1w(RSTP)
• IEEEE802.1s(MSTP)
• Root Guard
• BPDU Guard
• BPDU Tunnel
• IP Source Guard
• 802.1Q, 4K VLAN
• MAC VLAN, Voice VLAN, Protocol VLAN, Multicast VLAN
• QinQ, Selective QinQ, Flexible QinQ
• GVRP
• N:1 VLAN Translation
• Broadcast / Multicast / Unicast Storm Control
• IGMP v1/v2/v3 Snooping and L2 Query
• ND Snooping
• MLDv1/v2 Snooping
• Port Security
• Flow Control: HOL, IEEE802.3x
• Bandwidth Control
Traffic Monitor• sFlow Traffic Analysis
Security Network Management• CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6
• Syslog and external Syslog Server HTTP SSL
• SNMP MIB, SNMP TRAP
• FTP/TFTP
• SNTP/NTP
• RMON 1,2,3,9
• Authentication by Radius/TACACS
• SSH v1/v2
• Dual firmware images/ Configuration files
GREEN Features• IEEE 802.3az (Energy Efficient Ethernet)
• Auto FAN Speed Control, Temperature Alarm
• LED Shut-Off
MIB (Management Information Base) counters• TCP/IP-based MIB-II (RFC 1213)
• Ethernet-like MIB (RFC 3635)
• Interface Group MIB (RFC 2863)
• RMON (Remote Network Monitoring) MIB (RFC 2819)
• Bridge MIB (RFC 1493)
• Bridge MIB Extension (RFC 2674)
| DescriptionSOFTWARE FEATURE SET (SOLDIEROS L2+)Highlights:• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
L3 Features:• L3 Static/Default Route
• Gratuitous ARP
• IPv6
L2 Features:• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN – IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror – Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
QoS Features:• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
Security Features:• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
Management Features:• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
| Product OverviewCOMMANDO Scout E1000 Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, Internet cafes, hotels, schools, and suitable for surveillance. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+ with power budget up to 600W capability while reducing energy consumption and minimizing noise. This Series switches are available in 4 to 48 Gigabit Ethernet ports or 4 to 48 Fast Ethernet Ports with 2/4 fixed 1GE copper/ 1G Fiber Uplinks having enclosure type desktop, rack/wall mountable- 1U depending on switch model. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations. It can be quickly set up with plug and play with Zero Touch Provisioning. It is unmanaged SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250m cable distance. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity. It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected. It can also set any ports that are not transmitting traffic to sleep mode.Product Highlights•4 to 48 x 10/100Mbps or 10/100/1000Mbps Ethernet Ports along with fixed 1G fiber/1G copper Uplinks and PoE/PoE+ and non PoE Models.
•Extra 2/4 Ports slots with separate, fixed 1G Fiber/ 1GE Copper Switchports or Uplinks.
•Power over Ethernet (PoE) / Power over Ethernet plus (PoE+) models to provide power on all ports to IEEE 802.3af and IEEE 802.3at (15.4W, 30W) capable devices including Wireless AP, Bridges, IoT etc. according to the power budget Up to 600 W along with backward compatibility.
•All ports have PoE/PoE+ capability and 30W Max Per port.
•PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•Backplane Bandwidth: 1.2Gbps-56Gbps
•MAC address Table: 8000 entries
•MAC Address Auto-Learning and Auto-Aging
•Easy Installation, Plug-and-play installation with no configuration required
•Support Store-and-forward Switching
•Enclosure Type Desktop, Rack/Wall mountable - 1U.
•Surge protection ±4 kV
•All ports support jumbo frame of size 10000 bytes transmission.
•All 4 to 48 ports support auto-negotiation and auto MDI/MDIX.
•All ports capable of Gigabit Ethernet connections and provide full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX) model based.
•Plug and Play design simplifies installation with self-adaption.
•Desktop as well standard rack mountable option along with fan or fan-less option, silent design with Small form-factor. Perfect for noise sensitive environments.
•Energy-Saving by Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light.
•Automatically adjust the PoE/PoE+ power for connected PoE devices based on the cable length and supports up to 250m of cable length.
•With Zero Touch Provisioning: Plug and play and no setup.
•Affordable, Easy-to-Use Switches for Small Business Networks, with Zero Configuration Required
•Comes with one-year default warranty – optionally extendable up to 3 years.
Features And BenefitsEasy to UseCOMMANDO Scout E1000 Series Switches are easy to use and manage. All switches are Plug-and-Play devices that requires zero configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops as well as rackmount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.PoE/PoE+ CapabilitiesScout E1000 Series Switches are high power switches and support 75W up to 600W (PoE/PoE+) Power Budget. This Series switches smartly adjust IEEE802.3af / IEEE802.3at PoE/PoE+ (up to 30 Watts per port). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.Auto MDIX CapabilitiesAuto sensing/Auto PoE/PoE+ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.Compact and Silent PerformanceIt comes with one or two fans or fan-less models with Small form-factor, compact PoE/PoE+ switch operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.Compact design with flexibility of additional portsIt Provides additional deployment flexibility, fiber connectivity with separate extra flexible ports or combo ports options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Support uninterrupted critical network infrastructureIt has AC input power which protect from power surges through their inline power supply automatically and have in build Surge protection of ±4KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.Cost EfficientState of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.Green TechnologyIt features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.HardwareCOMMANDO Scout E1000 Series Unmanaged Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.Solid performance with non-blocking architecture•CPU Dual Core having frequency 500 MHz along with packet Buffer memory of 4.1MB.
•All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
•Solid performance with non-blocking architecture, 8000 entries MAC Address Table with 4-way hashing algorithm.
•Maximum packet length 10000 bytes.
•Jumbo frames of 10000 bytes.
•2-hash algorithm selection for L2 table searching/learning with Aging timer range from 0.2s to 1600000s.
•Switching Capacity: up to 56Gbps
•Forwarding Capacity: Up to 41.66Mpps
•Store-and-forward Switching Scheme.
Physical Ports and Networking Interfaces•Up to 48 x 10/100 or 10/100/1000 Mbps Rj45 Ethernet Ports with separate ports 2/4 GE (RJ-45) and 2/4 SFP and also combo port option 4 GE (RJ-45) or 4 SFP in some models. Extra separate 2/4 Ports with flexible 1G Fiber/ 1GE Copper Switchports /Uplinks.
•LED Indicators: Power, Link/Act, PoE Max.
IEEE 802.3af/at Compliant Power over Ethernet•Various power budget options like 75W, 150W, 260W, 450W and 600W with 30W Max Per port (PoE/PoE+). POE power supply transmission is more reliable due to design of robust network transformer which uses high current. All PoE/PoE+ ports are IEEE 802.3af-compliant PoE, IEEE802.3at-compliant PoE+. Each port delivers 15.4 W PoE, 30 W PoE+ power. PD detection will automatically detect and provide required power for your PoE/PoE+ devices.
Extra Long operational life•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Support temperature range 0° C to 55° C
•Surge protection up to ±4KV to designed to automatically protect Switches from surge events by limiting transient voltages and diverting surge currents.
•Long life electrolytic capacitance to increase the operational life of switches. RJ45 Gold plated with 3U thickness.
•Rack and Wall mount design that enables to mounts in an EIA Standard 19-inch telco rack or equipment cabinet along with Rack-mounting kit available with device. Which enables horizontal surface mounting, wall mounting and also having durable robust metal body.
Green Energy and Noise-free Operation•Comply with IEEE 802.3az (Energy-Efficient Ethernet) standard, reduces power consumption up to 58% and reduce the noise pollution. Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state.
•Automatic Temperature Controlled Fans using Temperature Small form-factor, fan-less as well fan design for silent operation. Perfect for noise sensitive environments.
•Temperature Control Fan to optimize cooling and noise with bilateral heat dissipation.
Ethernet ProtocolsSupports wide range of IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, IEEE802.3af, Power over Ethernet, IEEE802.3at, Power over Ethernet plus.Enterprise High reliability design and high quality product•Very high Quality as for all Mean Time Before Failure of system, MTBF >2,00,000 hours
•Stability: 64-bit packet, time delay < 10us, packet loss rate: 0
•Restorability of Network shaking or device breakdown, restart(recovery) time < 60sec.
•RoHS Compliant with most of the packaging material can be recycled and reused.
| Hikvision DS-3E0510P-E 8-Port Gigabit PoE Unmanaged Network Switch
Expand your network capacity using the DS-3E0510P-E 8-Port Gigabit PoE-Compliant Unmanaged Network Switch from Hikvision. This plug-and-play unmanaged switch doesn’t require any additional setup or configuration. It features eight PoE-compliant Gigabit Ethernet ports to connect surveillance cameras and other powered network devices in addition to a Gigabit RJ45 uplink port for expansion. The switch has a 20 Gb/s non-blocking switching capacity and a forwarding capacity of 14.88 Mbps. It also delivers up to 30W per port and up to 6kV surge protection with a total power budget of 110W. With its metal construction and fanless design, the DS-3E0510P-E operates silently on your desktop.
Growing Your NetworkThe DS-3E0510P-E switch includes eight Gigabit PoE-compliant Ethernet ports and one Gigabit RJ45 uplink port.
Powering Your DevicesThis switch has a 110W power budget, delivering up to 30W per port and 6kV surge protection.
Plug-and-Play DesignThe DS-3E0510P-E unmanaged switch does not require any additional configuration after being installed onto your network.
| SOFTWARE FEATURE SET (SOLDIEROS L2+)Highlights:• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
L3 Features:• L3 Static/Default Route
• Gratuitous ARP
• IPv6
L2 Features:• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN - IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror - Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
QoS Features:• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
Security Features:• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
Management Features:• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
|
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Reviews
There are no reviews yet.