COMMANDO AirONE AP1800AX-HD Wi-Fi 6 Indoor Access Point enables communication between wireless users with speed up to 1800Mbps with advanced Wi-Fi 6 Technology. It is standalone device, comes with dual band with 2.4GHz(600Mbps 11ax 2×2) + 5GHz(1200Mbps 2×2), equipped with separate 1G WAN ports & LAN ports. It support MU-MIMO and DL/UL-OFDMA modulation. It supports data rate up to 1800Mbps for wireless users and supports concurrent 160+ wireless clients with simultaneous upload or download of multiple packets at same time which enhances the sharing of files, photo, audio, video and gaming experience over wireless network. It supports Seamless Roaming, OFDMA, 1024-QAM, narrower sub-carrier spacing and longer symbol time which improves the stability and data processing efficiency. It can provide powerful wireless coverage to enterprise environments such as Small, Medium and Large enterprises, university campus, concert venue, gymnasium, etc.
It is powerful, long range & advance Wi-Fi 6 Indoor Access Point with 2 configuration modes namely Gateway & AP mode(Default Mode is AP mode). It supports range of 91 meters and above depending on surrounding conditions with up to 300mW input Power. It is industrial grade Wall/Ceiling IEEE 802.3at 48V PoE+ standard, install at every place to work as an stable base station for access users. It is equipped with separate Gigabit Ethernet WAN & LAN port.
It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It supports (IEEE 802.3at) PoE+, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
COMMANDO AirONE AP1800AX-HD is standalone WEB GUI based easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100/1000Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS. Various options for setting channel bandwidth in 2G band like 11NG_HT20, 11NG_HT40 & 11AXG_GHE20 and also in 5G band like 11NA_HT20, 11NA_HT40, 11AC_VHT20, 11AC_VHT40, 11AC_VHT8, 11AXA_AHE20, 11AXA_AHE40, 11AXA_AHE80, 11AXG_GHE40. It can check free channels available with inbuilt Wi-Fi analysis. It is ideal for installation to any desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
The IEEE 802.11ax is a emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. Equipped with the latest and fastest Wi-Fi 6 (802.11ax) technology, Multi-User (MU) Orthogonal Frequency Division Multiple Access (OFDMA). This subdivides the Wi-Fi channel into smaller frequency allocations (called Resource Units). Spatial reuse also known as BSSID coloring allows the access points and their clients to differentiate between other SSID, thus permitting more simultaneous transmissions. This capability permits an Access Point to synchronize communication with multiple individual client devices at the same time on the uplink and downlink when it comes to sending and receiving small packets of data. Supporting two spatial streams, MU-MIMO enables access points to split spatial streams between client devices to maximize throughput. It has 1024-QAM modulation signals which is better at penetrating solid objects like walls.
It provides with Gigabit Ethernet speed for LAN and WAN port. It Comply with IEEE 802.3az standard, energy efficient AP is well built, rigorously tested and can sustain very rough environment and provides reliable performance.
Supports up to 256 Max wireless users/clients with concurrent users 160+. It supports distance of 91 meters and above from AP in all directions for wireless clients.
Support Flexible user Access Control Policies & network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied like URL Filter , IP Filter , MAC Filter , Port Mapping and DMZ to permit or deny Wi-Fi users.
Auto sensing 10/100/1000Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
It has Dual power options with DC input power and PoE+ power input with WAN port which protect from power failures and increases life of device. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
It features the IEEE 802.3az standard, energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.
COMMANDO AirONE AP1800AX-HD supports software functions as follows.
Device Information like CPU Usage, Memory Usage, LAN Information like IP Mode Get IP From AC/Gateway/Static, Status with 2G/5G Wi-Fi, Clients Status with information like SSID, Channel, Bandwidth, Encrypt, MAC Address, Operation Mode configure like AP/ Fat AP Mode with Uptime, Flow in bps for AP Downstream and AP Up stream.
Gateway Mode, AP Mode (Default Selection).
2G/5G Wi-Fi with Basic and VAP (1 to 3) ON/OFF with Wi-Fi Analyzer, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2PSK_TKIPAES, MAC ACL with Add, Delete, Apply with disable/Allow/Prohibit option, Wi-Fi Timer OFF/ON with Time Frame, Advanced setting like Country Region, 2G/5G Channels, Country Region, User Isolation, Short GI, Coverage Threshold, Packet Threshold, RTS Threshold and DFS.
LAN Settings with DHCP server option, Static DHCP, Cloud Server Settings.
URL Filter, IP Filter, MAC Filter, Port mapping and DMZ.
Configure, Reboot, Modify Password, Upgrade, Time, Log, Flow Control, IP Group, Time Group and DDNS.
| SOFTWARE FUNCTION | |
|---|---|
| Wizard Function | Gateway Mode: In Gateway mode, all Ethernet is bridged together, and wireless clients will connect ISP access point or router connecting directly to the Internet via WAN PORT. NAT is enabled and PCs in Ethernet LAN port this is the same IP to ISP through wireless LAN. AP Mode: In AP mode, the device works as an access point to transform your existing wired network into a wireless network. |
| Flow in bps | For AP downstream and AP Up stream |
| Network | LAN Settings with DHCP server option, Static DHCP, Cloud Server Settings |
| Management | Configure, Reboot, Modify Password, Upgrade firmware, Time setting with NTP and from PC, Log, Restore the factory default. |
| Wi-Fi | SSID name setting, Bandwidth, Channel, Encryption options like Open/Encryption like WPA/WPA2PSK_TKIPAES, MAC ACL, Wi-Fi Timer OFF/ON with Time Frame. Advanced setting like Country Region, 2G/5G Channels, Country Region, User Isolation, Short GI, Coverage Threshold, Packet Threshold, RTS Threshold and DFS. |
| Parameters | Specification |
|---|---|
| Standard | IEEE 802.11ax/ac/b/g/n Wi-Fi 6 technology |
| RAM | 1GB |
| Flash | SPI NOR 8MB (1.8v) + NAND 128MB |
| Antenna | N type antenna connector |
| Interface | 10/100/1000Mbps LAN/WAN |
| Data Rate | 1800Mbps |
| Concurrent End Users | 160+ |
| Reset | Hardware button |
| Power | DC 12V 1.5A or IEEE802.3at (WAN) |
| User Capacity | Up to 256 |
| Dimension | 198mmx198mmx28mm |
| Environment | Operating Temperature: -20~45 ℃ Limit working temperature: -30~70 ℃ Storage Temperature: 0~70 ℃ Humidity: 5%~95% non-condensing |
| Warranty Period | 1 Year |
| Indicator Light | Power/SYS, LAN, WAN |
Supports 2.4GHz+5GHz, IEEE 802.11ax/ac/b/g/n with backward compatible wireless clients, wave 2.0 technology, Standalone model with Multi SSIDs up to 8 with either open or WPA/WPA2PSK_TKIPAES encryption with Dual option for input Power supply with either 48V PoE+ (IEEE 802.3at) or DC input power.
| Technical Parameters | Specification |
|---|---|
| Hardware Specifications | 1*10/100/1000Mbps auto-negotiation WAN port or IEEE 802.3at PoE+ port 1*10/100/1000Mbps auto-negotiation LAN port 1* Reset button/Restore to factory default 1*DC Port |
| Memory | 1GB RAM |
| Flash | SPI NOR 8MB (1.8v) + NAND 128MB |
| IEEE Standard | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax |
| Data Transfer Rates | Dual band IEEE 802.11b up to 11Mbps IEEE 802.11g up to 54Mbps IEEE 802.11n up to 400Mbps IEEE 802.11ac up to 900Mbps IEEE 802.11ax up to 1200Mbps |
| Frequency | Radio 2.4GHz+5GHz |
| Throughput | Up to 1800Mbps |
| Network Functions | DHCP Server, Static, LAN and Gateway. |
| Wi-Fi Operational Modes | AP & Gateway Mode |
| Wireless Security | Open or Encryption WPA/WPA2PSK_TKIPAES option |
| Multiple SSID | Up to 8 SSIDs. |
| Access control Features | MAC Access Control |
| Enclosure Type | Desktop/Ceiling/Wall mounted |
| Wi-Fi Transmit Power | 300mW |
| Input Power Supply | WAN port PoE+ IEEE802.3at Or DC 12V ,1.5A |
| Management | Web based management Backup & Restore to default Settings |
| ENVIRONMENTAL | Operating Temperature: -20~45 ℃ Limit working temperature: -30~70 ℃ Storage Temperature: 0~70 ℃ Humidity: 5%~95% non-condensing |
| Weight | <1Kg |
| LED Indicator | LED Status |
|---|---|
| Power/SYS | Green Blinking: Power ON Indication Blue and Blinking: Wi-Fi indication that SSID now available for use. |
| WAN | Upper LED WAN: Connect with Gateway or PoE+ devices and Green Blinking shows activity on WAN port. |
| LAN | Lower LED LAN: Connect to end users and Green ON shows activity on LAN port. |
COMMANDO AirONE AP1800AX-HD comes with following accessories.
| Warranty and Support | |
|---|---|
| Products covered | COMMANDO AirONE 1800Mbps, 2.4GHz+5GHz, 802.11ax/ac/b/g/n, Wave 2.0, High Density, Wi-Fi 6 Access Point |
| Warranty duration | One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years. |
| Hardware replacement | COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request. |
| End-of-life policy | In case of discontinuation of the product, support is limited to 3 years from announcement date. |
| Effective date | Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO). |
| Support duration | Lifetime support. |
| COMMANDO Cis | COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration. |
