It has separate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the backend the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.
It is designed for the Outdoors with weather resistant IP65 case specifically for outdoor installations. It has 2 in 1 mode with AP mode and Station mode with range up to 10 Kms. It is industrial grade Bridge with great communication efficiency, equipped with separate Gigabit WAN & LAN port which enhances the sharing of files, photo, audio, video, and gaming experience over wireless network.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It has 2 in 1 mode like AP Mode or Station mode. AirNET bridge can act as AP as well as Bridge but one at a time.
It provides and offers a wide range of models for different network deployment requirements with gigabit speed. Auto-negotiation senses the link speed of a network device in wired 10, 100, or 1000Mbps.
COMMANDO AirNET Bridge are WEB GUI based easy to use and manage standalone device. It requires minimal configuration, so setup is simple and hassle-free. For wireless clients/users, it can intelligently adjust for compatibility and optimal performance by DFS. Its compact size makes it ideal for Outdoor wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
By setting channel bandwidth up to 20/40/80/160 MHz can increase the speed of bridge connection up to 900Mbps between bridges.
It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. It comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment with 6KV Lightning Protection with no Ingress of dust as well as waterproof enclosure. These energy efficient Bridges are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.
Supports bridge distance of up to 10KM with (Point to Point) PTP 27dBi MIMO high gain panel antenna which can greatly increase the Wi-Fi range to 10KM distance and supply stable Wi-Fi signal for users.
Auto sensing 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
It has Dual power options with DC input power and POE IN power input which protect from power failures and increases life of device. It comes with Lighting surge protection Common mode ±6KV and Differential mode ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.
COMMANDO AirNET Bridge supports software functions as follows.
Guide Wizard helps for Fast Setup to Finish config in several steps
A) Overview: shows Status of System/Model/MAC/Uptime/Load Average/ Memory (Total Available, Free, Buffered) /Active Connections/ Associated Stations
B) Real time Graphs: Load, Traffic, Wireless, Connections
LAN, Wi-Fi Basic, Wi-Fi Advanced (For setting Super channels), Diagnostics, Autotxpower, Network, Watchdog
Password, Upgrade/Reset, Auto-reboot, Reboot
User Logout from Web access.
| HARDWARE SPECIFICATION | |||||||||||
| Standard | 802.11ac/b/g/n | ||||||||||
| RAM | 32-128 MB | ||||||||||
| Flash | 8 -32MB | ||||||||||
| Interface | 2* 10/100/1000M LAN/WAN with POE IN option Port | ||||||||||
| Hardware button | Reset Button | ||||||||||
| Power | DC In 12V, 0.5 to 1 A and POE IN 24V, 0.5 to 1 A | ||||||||||
| Antenna | Directional 27/25/23/20dBi MIMO Panel antenna. | ||||||||||
| Working Temperature | 0°C to +55°C | ||||||||||
| Working Humidity | 5%~95%RH(Non-condensing) | ||||||||||
| Warranty Period | 1 Year | ||||||||||
| LED Indicator Light | PWR, LAN, Wi-Fi, WAN | ||||||||||
Supports 802.11ac, with Standalone models with either open or encryption with Dual option for input Power supply with either 24V, 0.5 to 1A POE IN or DC input power 12V, 0.5 to 1A and also have 27/25/23/20dBi gain Internal Panel Antenna.
| Technical Parameters | Specification |
| Hardware Specifications | 1*10/100/1000Mbps auto-negotiation WAN port 1*10/100/1000Mbps auto-negotiation LAN port 1* Reset button |
| Memory | 32-128RAM |
| Flash | 8-32MB |
| IEEE Standard | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n , IEEE 802.11ac MIMO technology |
| Data Transfer Rates | For Single band IEEE 802.11b up to 11Mbps IEEE 802.11g up to 54Mbps IEEE 802.11n up to 300Mbps IEEE 802.11ac up to 900Mbps |
| Frequency | Radio 2.4GHz or 5GHz |
| Throughput | Up to 900Mbps |
| Wi-Fi Operational Modes | AP, Station Mode |
| Wireless Security | Open or Encryption |
| Enclosure Type | Desktop/Wall/Ceiling mounted depending on models. |
| Input Power Supply | POE IN 24V 0.5 to 1 Amp OR DC 12V ,0.5 to 1A depending on model |
| Management | Web based management Backup & Restore to default settings |
| ENVIRONMENTAL | Operating Temperature: 0° C to +55° C Humidity: 5% to 95% non-condensing Storage and transportation Temperature: -40° C to +70° C (-40° F to +158° F) |
| Weight | 1Kg |
| Product Code | AIR-WB5G-1K | AIR-WB5G-2K | AIR-WB5G-3K | AIR-WB5G-5K | AIR-WB5G-10K | AIR-WB5G-10K-HG | AIR-WB-1K | AIR-WB-5K |
| Wireless data rate | 300Mbps | 300Mbps | 300Mbps | 300Mbps | 867Mbps | 867Mbps | 150Mbps | 300Mbps |
| Operation Mode | AP or station | AP or station | AP or station | AP or station | AP or station | AP or station | AP or station | AP or station |
| Distance covered | 1KM | 2KM | 3KM | 5KM | 10KM | 10KM | 1KM | 5KM |
| IEEE Standard | 802.11n | 802.11n | 802.11n | 802.11n | 802.11ac | 802.11ac | 802.11n | 802.11n |
| Frequency | 5GHz, | 5GHz, | 5GHz, | 5GHz, | 5GHz, | 5GHz, | 2.4GHz | 2.4GHz |
| Antenna | 2x13dBi | 2x13dBi | 2x13dBi | 2x14dBi | 2x14dBi | 2x16dBi | 1x8dBi | 2x12dBi |
| RF Power | 23dBm | 23dBm | 25dBm | 27dBm | 25dBm, | 25dBm, | 20dBm | 27dBm |
| WAN | 1 * 10/100Mbps | 1 * 10/100Mbps | 1 * 10/100Mbps | 1 * 10/100/1000Mbps | 1 * 10/100Mbps | 1 * 10/100/1000Mbps | 1 * 10/100/1000Mbps | 1 * 10/100Mbps |
| LAN | 1 * 10/100Mbps | - | - | 1 * 10/100/1000Mbps | 1 * 10/100Mbps | - | 1 * 10/100/1000Mbps | - |
| LED Indicator | LED Status |
| Power | Green OFF: No power. Green ON: POE / DC power given. |
| WAN | Green OFF: WAN not connected Green ON: WAN connect with Gateway or POE devices and Green blinking shows activity on WAN port. |
| LAN | Green OFF: LAN not connected Green ON: LAN connect with Gateway or POE devices and Green blinking shows activity on LAN port. |
| Wi-Fi | Green ON: Wi-Fi Device connected and Green blinking shows user activity. Green OFF: User not connected |
| 5G | Green ON: 5G channel selected Green OFF: 5G not enabled. |
All COMMANDO AirNET series Bridge made available for use globally along with accessory used to facilitate or enhance operations. All COMMANDO AirNET series Bridge Comes with following Accessories.
| Warranty and Support | |||||||||||
| Products covered | COMMANDO AirNET Series Wireless Bridge | ||||||||||
| Warranty duration | One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years. | ||||||||||
| Hardware replacement | COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request. | ||||||||||
| End-of-life policy | In case of discontinuation of the product, support is limited to 3 years from announcement date. | ||||||||||
| Effective date | Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO). | ||||||||||
| Support duration | Lifetime support. | ||||||||||
| COMMANDO Care | COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration. | ||||||||||
| Online Portal Access | Warranty allows guest access to commandonetworks.com for all available technical queries. | ||||||||||
