COMMANDO AirONE 10KM+

SKU: AIR-CPE10K+
UGX 556,000
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
SKU: AIR-CPE10K+ Categories: , , ,

Description

Super Wds mode where bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. All bridges act as master and slave simultaneously. With this Super WDS meshing of bridges makes network failure rate to zero. It enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 18/15/11 dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the CPE and base station. It provides low latency, high throughput in PTP/PTMP/MTMP application likes IP camera, long range Wi-Fi Transmission) with Beamforming Technology.

eparate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the back-end the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, a wireless bridge can also be connected to more than one (Up to 4) wireless bridge simultaneously forming a mesh network. Unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.

It is designed for the Outdoors with weather-resistant IP65 case specifically for outdoor installations. It has 4 in 1 mode Access Point with Gateway, Repeater,Super WDS and Wireless AP mode with range up to 10 Kms with up to 500mW input Power. It is industrial grade Bridge with great communication efficiency, equipped with separate Gigabit WAN & LAN port which enhances the sharing of files, photo, audio, video and gaming experience over wireless network.

It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.

 

Product Highlights 

• Support Super WDS mode, device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and APs (Up to 4).
• Supports IEEE 802.11ac 5GHz Wireless bands.
• Multiple Operational Modes like Gateway Mode, Super WDS Mode, Repeater mode, AP mode. All COMMANDO AirONE series Bridge default mode is Super WDS mode. In 10KM bridge also support WISP mode.
• Dual input for power either POE IN or DC power inputs.
• IEEE 802.1q Tag based VLAN
• Support Enterprise security : WPA, WPA2, 802.1x RADIUS
• Supports IEEE 802.11ac 5GHz Wireless with inbuilt 18/15/11 dBi gain Antenna panel antenna with RF input Power up to 500mW.
• Support wireless RF power adjustable as per user movements from bridge.
• Supports intelligent load balance based on users.
• Support seamless roaming and low rate terminal access.
• Support inbuilt Wi-Fi channel analyzer.
• Dual purposes WAN or LAN port supporting 1x 10/100/1000Mbps. .
• Supports Wi-Fi client distance up to 10Km depending on surrounding conditions.
• Support Open or encryption like WPA/WPA2-PSK
• Plug and Play design simplifies installation with self-adaption.
• Compact IP65 casing comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment.
• Silent design perfect for noise sensitive environments.
• With Zero Touch Provisioning: Plug and play and no setup. Affordable, Easy-to-Use AP for Small Business Networks, with Zero Configuration Required.
• Built-in High-Performance Processor with long life, Suitable for Deployment of Large Scale Commercial Scenarios
• Comes with one-year default warranty – optionally extendable up to 3 years.

 

Features And Benefits 

Multiple Operational Modes

It has 4 in 1 mode like Gateway Mode, Super WDS Mode, Repeater mode, AP mode. All COMMANDO AirONE series Bridge default mode is in Super WDS mode. In 10KM bridge has 5 in 1 mode, it also supports WISP mode.

Super WDS mode

device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and AP’s (Up to 4). In this mode bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. It can act as AP as well as Bridge both simultaneously and can connect other bridges and APs.

Gigabit LAN speed

offers a wide range of models for different network deployment requirements with gigabit speed. Auto-negotiation senses the link speed of a network device in wired 10, 100, or 1000Mbps.

Easy to Use

COMMANDO AirONE Bridge are WEB GUI based easy to use and manage standalone device. It requires minimal configuration, so setup is simple and hassle-free. For wireless clients/users, it can intelligently adjust for compatibility and optimal performance by DFS. Its compact size makes it ideal for Outdoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.

Wireless speed for client and bridge

By setting channel bandwidth up to 20/40/80 MHz can increase the speed of bridge connection up to 900Mbps between bridges and also can check free channels available with inbuilt Wi-Fi analysis.

Weatherproof Enclosure with IP65

It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. It comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment with 6KV Lightning Protection with no Ingress of dust as well as water proof enclosure. These energy efficient Bridges are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.

Wi-Fi That Goes the Distance

Supports bridge distance of up to 10KM with (Point to Point) PTP/ (Point to Multi Point) PTMP /(Multi Point to Multi Point) MTMP. Designed for Point-to-Point and Point-to-Multipoint applications with 500mW high power and 18dBi MIMO high gain panel antenna which can greatly increase the Wi-Fi range to 10KM distance and supply stable Wi-Fi signal for users.

Network Security

Support Flexible user Access Control Policies. MAC Filtering function to block the access of illegal hosts. Access Rules can be applied to permit or deny Wi-Fi users.

Auto MDIX Capabilities

Auto sensing 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.

Compact and Silent Performance

It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.

Support uninterrupted critical network infrastructure

It has Dual power options with DC input power and POE IN power input which protect from power failures and increases life of device. It comes with Lighting surge protection Common mode ±6KV and Differential mode ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.

Cost Efficient

State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.

Green Technology

features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.

 

Software 

COMMANDO AirONE Bridge supports software functions as follows.

Home

Default Working Mode Super WDS Mode, Uptime, Flow for WDS Down/ Up Stream, Device Information like CPU /Memory Usage, WDS Status, Bandwidth Test, Wi-Fi Status, Device location.

Wizard

Gateway Mode, Super WDS Mode (Default Selection), Repeater Mode, AP Mode.

Note:- 10Km bridge additionally support WISP mode.

CPE Manage

Channel, Device List, Description, MAC Address, IP Address, Signal, Status, Uptime

Wi-Fi Setting

2G Wi-Fi/ 5G Wi-Fi depending on models for Wi-Fi Status ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2-PSK.

WDS Settings with AP SSID scanning up to 4 , password with WPA/WPA2-PSK, Band Width setting with channel along with WI-FI Analyzer.

MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option.

Advanced setting with Country Region, Channels, Max Client, WLAN Partition, Short GI ON/OFF, Multicast Fast ON/OFF,TX Power Max/Efficient/Enhanced/Standard/Minimum.

Network Config

LAN Settings with IP Mode Static IP/ Get IP from AC / GHCP (Default option)/ Get IP from Gateway.

DHCP Server ON/OFF button with Start Address, Max Number, DHCP Lease Time

By default 24(Hour), Assigned IP Number with apply button.

Device Manage

Configure, Reboot, Modify Password, Upgrade, Time, Log

Table 1. Software functions

SOFTWARE FUNCTION 
Wizard Function In Gateway mode, all Ethernet are bridged together, and wireless clients will connect ISP access point or router connecting directly to the Internet via WAN PORT. NAT is enabled and PCs in Ethernet LAN port share the same IP to ISP through wireless LAN.
Super WDS mode: In Super WDS mode, device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and APs (Up to 4). In this mode bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time.
Repeater Mode: In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office.
WISP Mode: In WISP mode, the device connects to ISP station or hot spot wirelessly to share network with local wired and wireless devices.
AP Mode: In AP mode, the device works as an access point to transform your existing wired network into a wireless network.
Flow in bps For WDS downstream and WDS Up stream
Network LAN Settings with DHCP server option
Management Configure, Reboot, Modify Password, Upgrade firmware, Time setting with NTP and from PC, Log, Restore the factory default
Wi-Fi Wi-Fi Status ON/OFF, Changing SSID Name , Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2-PSK. WDS Settings with AP SSID scanning up to 4 , password with WPA/WPA2-PSK, Band Width setting with channel along with WI-FI Analyzer. MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option. Advanced setting with Country Region, Channels, Max Client, WLAN Partition, Short GI ON/OFF, Multicast Fast ON/OFF,TX Power Max/Efficient/Enhanced/Standard/Minimum.

 

Hardware 

Solid performance with non-blocking architecture

• 16 MB Flash, 128 MB RAM
• All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
• Solid performance with non-blocking architecture.

Physical Ports and Networking Interfaces

• Up to 2 x 10/100/1000 Mbps Rj45 Ethernet Ports with combined POE IN with WAN/LAN
• Channel setting LED panel
• LED Indicators :Power, LAN, Wi-Fi, WAN with Channel display in CPE 1K+ model and has 5G, LAN, WAN,SYS in CPE 5K+ and 10K+ models
• Reset Button
• Function button to select channel parameters
• Selector button to Change the channel parameters
• DC Input

Extra Long operational life

• High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
• Support temperature range 0° C to 55° C
• Lighting surge protection Common mode ±6KV and Differential mode ±2KV.
• Exceptional Performance in Harsh Outdoor Climates with IP65 weatherproof and dust proof enclosure ensuring it can withstand harsh outdoor and indoor environments.

Table 2. Hardware Specifications

HARDWARE SPECIFICATION
Standard 802.11ac/b/g/n
RAM 128 MB
Flash 16 MB
Interface 2* 10/100/1000M LAN/WAN with POE+ IN option Port
Hardware button Reset Button , Function Button for select setting channel and S Button to change channel
Power DC In 12V, 0.5 to 1 A and POE+ IN 24V, 0.5 to 1 A ( IEEE 802.3at )
Antenna Directional 18/15/11 dBi MIMO Panel antenna.
Working Temperature 0°C to +55°C
Working Humidity 5%~95%RH(Non-condensing)
Warranty 1 Year
Period
AIR-CPE1K+ –> PWR, LAN, Wi-Fi, WAN
AIR-CPE5K+ –>SYS,WAN,LAN,5G
AIR-CPE10K+ –>SYS,WAN,LAN,5G

Technical Specifications

Supports 802.11ac, with Standalone models with either open or WPA/WPA2-PSK encryption with Dual option for input Power supply with either 24V, 0.5 to 1A POE IN or DC input power 12V , 0.5 to 1A and also have 18/15/11 dBi gain Internal Panel Antenna.

Table 3. Specifications

Technical Parameters Specification
Hardware Specifications 1*10/100/1000Mbps auto-negotiation WAN port or IEEE 802.3at POE+ port
1*10/100/1000Mbps auto-negotiation LAN port
1* Reset button
1*Function button
1*Select button
1*DC Power input Port
Memory 128RAM
Flash 16MB
IEEE Standard IEEE 802.11b ,IEEE 802.11g ,IEEE 802.11n , IEEE 802.11ac MIMO technology
Data Transfer Rates For Single band IEEE 802.11b up to 11Mbps
IEEE 802.11g up to 54Mbps
IEEE 802.11n up to 300Mbps
IEEE 802.11ac up to 900Mbps
Frequency Radio 2.4GHz+5GHz
Throughput Up to 900Mbps
Network Functions 802.1q Tag based VLAN, DHCP Server , Static, PPPOE
Wi-Fi Operational Modes Super WDS, AP, Repeater, WISP Mode, Gateway Mode
Wireless Security Open or Encryption WPA/WPA2PSK_TKIPAES option
Access control Features MAC Access Control
Enclosure Type Desktop/Wall/Ceiling mounted depending on models.
Wi-Fi Transmit Power Up to 500mW
Input Power Supply POE IN 24V 0.5 to 1 Amp OR DC 12V ,0.5 to 1A depending on model
Management Web based management
Backup & Restore to default Settings
ENVIRONMENTAL Operating Temperature: 0° C to +55° C
Humidity: 5% to 95% non-condensing
Storage and transportation Temperature: -40° C to +70° C (-40° F to +158° F)
Weight 1Kg

Table 4. Model Comparison

Features  AIR-CPE10K+ AIR-CPE5K+ AIR-CPE1K+
Flash /RAM 16MB/128MB 16MB/128MB 8MB/64MB
Standard IEEE802.11ac/a IEEE802.11ac/a IEEE802.11b/g/n
Frequency 5.150~5.825GHz 5.150~5.825GHz 2.4GHz~2.484GHz
Wireless data rate 900Mbps 900Mbps 300Mbps
WAN 1*10/100/1000Mbps 1*10/100/1000Mbps 1*10/100Mbps
LAN 1*10/100/1000Mbps 1*10/100/1000Mbps 1*10/100Mbps
POE Power 24V Passive POE 24V Passive POE Support 24V POE
Antenna 18dBi Panel Antenna 15dBi Panel Antenna 11dBi Panel Antenna
RF Power 500mW 500mW 100mW
Lightning Level Common mode: 6KV; Differential mode 2KV Common mode: 6KV; Differential mode 2KV Common mode: 6KV; Differential mode 2KV
PTP Distance 10KM 5KM 1KM
Operation Mode AP, Super WDS, Repeater, WISP, Gateway Mode AP, Super WDS, Repeater, Gateway Mode AP, Super WDS, Repeater, Gateway Mode
PoE IN 24V, 1A 24V, 1A 24V, 0.5A
DC IN 12V, 1A 12V, 1A 12V, 0.5A

Table 5 .COMMANDO AirONE Series AP LED indication

LED Indicator LED Status
Power Green OFF:- No power.
Green ON:- POE+/ DC power given.
WAN Green OFF:- WAN not connected
Green ON: WAN connect with Gateway or POE+ devices and Green blinking shows activity on WAN port.
Green OFF:- LAN not connected
LAN Green ON: LAN connect with Gateway or POE+ devices and Green blinking shows activity on LAN port.
Wi-Fi Green ON: Wi-Fi Device connected and Green blinking shows user activity.
Green OFF:- User not connected
Green ON: 5G channel selected
5G Green OFF:- 5G not enabled.
Green ON: Device is Power ON
SYS Green OFF:- Device is Power OFF

Included in the bundle/box

COMMANDO AirONE Series Wireless Bridge

All COMMANDO AirONE series Bridge made available for use globally along with accessory used to facilitate or enhance operations. All COMMANDO AirONE series Bridge Comes with following Accessories.

COMMANDO AirONE Series Wireless Bridge.

• 1x Patch Cord
• 1x Wall Mount with Mounting Screws
• LAN cable

 

Support And Warranty 

• Same-day assistance.
• Comprehensive 24-hour support using common communication/chat platforms, Email and Telephone.
• Provide FAQs and troubleshooting help online (self-service) through cloud-based solutions.
• Highly technical and trained representatives to resolve issues.
• One-year default warranty with option of warranty extension up to 3 years

Table 6. Support and Warranty

Warranty and Support
Products covered COMMANDO AirONE Series Wireless Bridge
Warranty duration One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years.
Hardware replacement COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request.
End-of-life policy In case of discontinuation of the product, support is limited to 3 years from announcement date.
Effective date Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).
Support duration Lifetime support.
COMMANDO Care COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.
Online Portal Access Warranty allows guest access to commandonetworks.com for all available technical queries.

 

Quick Comparison

SettingsCOMMANDO AirONE 10KM+ removeCOMMANDO Marshall C3500 24x 10G SFP+ removeTP LINK 300Mbps Wireless N PCI Express Adapter removeTP LINK 300Mbps Wireless N 4G LTE Router removeCOMMANDO Soldier C3000 24GE PoE+, removeCOMMANDO Soldier E2000 24GE PoE+ remove
NameCOMMANDO AirONE 10KM+ removeCOMMANDO Marshall C3500 24x 10G SFP+ removeTP LINK 300Mbps Wireless N PCI Express Adapter removeTP LINK 300Mbps Wireless N 4G LTE Router removeCOMMANDO Soldier C3000 24GE PoE+, removeCOMMANDO Soldier E2000 24GE PoE+ remove
Image
SKUAIR-CPE10K+C3500-24XTL-WN881NDTL-MR6400C3000-24GP+4XE2000-24GP+8CF
Rating
PriceUGX 556,000UGX 10,307,000UGX 55,000UGX 276,000UGX 3,911,000UGX 1,763,000
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

24 x 10G SFP+ ports

2 x 100G QSFP28 Static Uplink slot

Switching Capacity: 880 Gbps

3 Temperature Control Fan

MarshallOS L3+ IP Services Software Feature Set

L3+ 100G QSFP28 Fiber Routing Switch

Features:
  • Wireless N speed up to 300Mbps makes it ideal for video streaming, online gaming and Internet calls
  • MIMO technology with stronger signal penetration strength, wider wireless coverage, providing better performance and stability
  • Easily setup a highly secured wireless link with WPS (Wi-Fi Protected Setup)
  • Share your 4G LTE network with multiple Wi-Fi devices and enjoy download speeds of up to 150Mbps
  • Wireless N speeds of up to 300Mbps
  • Integrated antennas provide stable wireless connections
  • Requires no configuration – just insert a SIM card and turn it on to enjoy high speed internet access
  • LAN/WAN port provides options and flexibility, allowing you to choose your connection type
  • FACTORY UNLOCKED AND WORKS WITH ALL SIM CARDS AND IN ALL COUNTRIES
COMMANDO Soldier C3000 24GE PoE+, 4x 10G SFP+ Uplinks, 600W Max, Routing Switch.
Content
Super Wds mode where bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. All bridges act as master and slave simultaneously. With this Super WDS meshing of bridges makes network failure rate to zero. It enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 18/15/11 dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the CPE and base station. It provides low latency, high throughput in PTP/PTMP/MTMP application likes IP camera, long range Wi-Fi Transmission) with Beamforming Technology. eparate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the back-end the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, a wireless bridge can also be connected to more than one (Up to 4) wireless bridge simultaneously forming a mesh network. Unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device. It is designed for the Outdoors with weather-resistant IP65 case specifically for outdoor installations. It has 4 in 1 mode Access Point with Gateway, Repeater,Super WDS and Wireless AP mode with range up to 10 Kms with up to 500mW input Power. It is industrial grade Bridge with great communication efficiency, equipped with separate Gigabit WAN & LAN port which enhances the sharing of files, photo, audio, video and gaming experience over wireless network. It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
 

Product Highlights 

• Support Super WDS mode, device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and APs (Up to 4).
• Supports IEEE 802.11ac 5GHz Wireless bands.
• Multiple Operational Modes like Gateway Mode, Super WDS Mode, Repeater mode, AP mode. All COMMANDO AirONE series Bridge default mode is Super WDS mode. In 10KM bridge also support WISP mode.
• Dual input for power either POE IN or DC power inputs.
• IEEE 802.1q Tag based VLAN
• Support Enterprise security : WPA, WPA2, 802.1x RADIUS
• Supports IEEE 802.11ac 5GHz Wireless with inbuilt 18/15/11 dBi gain Antenna panel antenna with RF input Power up to 500mW.
• Support wireless RF power adjustable as per user movements from bridge.
• Supports intelligent load balance based on users.
• Support seamless roaming and low rate terminal access.
• Support inbuilt Wi-Fi channel analyzer.
• Dual purposes WAN or LAN port supporting 1x 10/100/1000Mbps. .
• Supports Wi-Fi client distance up to 10Km depending on surrounding conditions.
• Support Open or encryption like WPA/WPA2-PSK
• Plug and Play design simplifies installation with self-adaption.
• Compact IP65 casing comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment.
• Silent design perfect for noise sensitive environments.
• With Zero Touch Provisioning: Plug and play and no setup. Affordable, Easy-to-Use AP for Small Business Networks, with Zero Configuration Required.
• Built-in High-Performance Processor with long life, Suitable for Deployment of Large Scale Commercial Scenarios
• Comes with one-year default warranty – optionally extendable up to 3 years.
 

Features And Benefits 

Multiple Operational Modes

It has 4 in 1 mode like Gateway Mode, Super WDS Mode, Repeater mode, AP mode. All COMMANDO AirONE series Bridge default mode is in Super WDS mode. In 10KM bridge has 5 in 1 mode, it also supports WISP mode.

Super WDS mode

device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and AP’s (Up to 4). In this mode bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. It can act as AP as well as Bridge both simultaneously and can connect other bridges and APs.

Gigabit LAN speed

offers a wide range of models for different network deployment requirements with gigabit speed. Auto-negotiation senses the link speed of a network device in wired 10, 100, or 1000Mbps.

Easy to Use

COMMANDO AirONE Bridge are WEB GUI based easy to use and manage standalone device. It requires minimal configuration, so setup is simple and hassle-free. For wireless clients/users, it can intelligently adjust for compatibility and optimal performance by DFS. Its compact size makes it ideal for Outdoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.

Wireless speed for client and bridge

By setting channel bandwidth up to 20/40/80 MHz can increase the speed of bridge connection up to 900Mbps between bridges and also can check free channels available with inbuilt Wi-Fi analysis.

Weatherproof Enclosure with IP65

It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. It comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment with 6KV Lightning Protection with no Ingress of dust as well as water proof enclosure. These energy efficient Bridges are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.

Wi-Fi That Goes the Distance

Supports bridge distance of up to 10KM with (Point to Point) PTP/ (Point to Multi Point) PTMP /(Multi Point to Multi Point) MTMP. Designed for Point-to-Point and Point-to-Multipoint applications with 500mW high power and 18dBi MIMO high gain panel antenna which can greatly increase the Wi-Fi range to 10KM distance and supply stable Wi-Fi signal for users.

Network Security

Support Flexible user Access Control Policies. MAC Filtering function to block the access of illegal hosts. Access Rules can be applied to permit or deny Wi-Fi users.

Auto MDIX Capabilities

Auto sensing 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.

Compact and Silent Performance

It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.

Support uninterrupted critical network infrastructure

It has Dual power options with DC input power and POE IN power input which protect from power failures and increases life of device. It comes with Lighting surge protection Common mode ±6KV and Differential mode ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.

Cost Efficient

State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.

Green Technology

features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.
 

Software 

COMMANDO AirONE Bridge supports software functions as follows.

Home

Default Working Mode Super WDS Mode, Uptime, Flow for WDS Down/ Up Stream, Device Information like CPU /Memory Usage, WDS Status, Bandwidth Test, Wi-Fi Status, Device location.

Wizard

Gateway Mode, Super WDS Mode (Default Selection), Repeater Mode, AP Mode. Note:- 10Km bridge additionally support WISP mode.

CPE Manage

Channel, Device List, Description, MAC Address, IP Address, Signal, Status, Uptime

Wi-Fi Setting

2G Wi-Fi/ 5G Wi-Fi depending on models for Wi-Fi Status ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2-PSK. WDS Settings with AP SSID scanning up to 4 , password with WPA/WPA2-PSK, Band Width setting with channel along with WI-FI Analyzer. MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option. Advanced setting with Country Region, Channels, Max Client, WLAN Partition, Short GI ON/OFF, Multicast Fast ON/OFF,TX Power Max/Efficient/Enhanced/Standard/Minimum. Network Config LAN Settings with IP Mode Static IP/ Get IP from AC / GHCP (Default option)/ Get IP from Gateway. DHCP Server ON/OFF button with Start Address, Max Number, DHCP Lease Time By default 24(Hour), Assigned IP Number with apply button.

Device Manage

Configure, Reboot, Modify Password, Upgrade, Time, Log

Table 1. Software functions

SOFTWARE FUNCTION 
Wizard Function In Gateway mode, all Ethernet are bridged together, and wireless clients will connect ISP access point or router connecting directly to the Internet via WAN PORT. NAT is enabled and PCs in Ethernet LAN port share the same IP to ISP through wireless LAN. Super WDS mode: In Super WDS mode, device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and APs (Up to 4). In this mode bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. Repeater Mode: In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office. WISP Mode: In WISP mode, the device connects to ISP station or hot spot wirelessly to share network with local wired and wireless devices. AP Mode: In AP mode, the device works as an access point to transform your existing wired network into a wireless network.
Flow in bps For WDS downstream and WDS Up stream
Network LAN Settings with DHCP server option
Management Configure, Reboot, Modify Password, Upgrade firmware, Time setting with NTP and from PC, Log, Restore the factory default
Wi-Fi Wi-Fi Status ON/OFF, Changing SSID Name , Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2-PSK. WDS Settings with AP SSID scanning up to 4 , password with WPA/WPA2-PSK, Band Width setting with channel along with WI-FI Analyzer. MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option. Advanced setting with Country Region, Channels, Max Client, WLAN Partition, Short GI ON/OFF, Multicast Fast ON/OFF,TX Power Max/Efficient/Enhanced/Standard/Minimum.
 

Hardware 

Solid performance with non-blocking architecture

• 16 MB Flash, 128 MB RAM
• All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
• Solid performance with non-blocking architecture.

Physical Ports and Networking Interfaces

• Up to 2 x 10/100/1000 Mbps Rj45 Ethernet Ports with combined POE IN with WAN/LAN
• Channel setting LED panel
• LED Indicators :Power, LAN, Wi-Fi, WAN with Channel display in CPE 1K+ model and has 5G, LAN, WAN,SYS in CPE 5K+ and 10K+ models
• Reset Button
• Function button to select channel parameters
• Selector button to Change the channel parameters
• DC Input

Extra Long operational life

• High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
• Support temperature range 0° C to 55° C
• Lighting surge protection Common mode ±6KV and Differential mode ±2KV.
• Exceptional Performance in Harsh Outdoor Climates with IP65 weatherproof and dust proof enclosure ensuring it can withstand harsh outdoor and indoor environments.

Table 2. Hardware Specifications

HARDWARE SPECIFICATION
Standard 802.11ac/b/g/n
RAM 128 MB
Flash 16 MB
Interface 2* 10/100/1000M LAN/WAN with POE+ IN option Port
Hardware button Reset Button , Function Button for select setting channel and S Button to change channel
Power DC In 12V, 0.5 to 1 A and POE+ IN 24V, 0.5 to 1 A ( IEEE 802.3at )
Antenna Directional 18/15/11 dBi MIMO Panel antenna.
Working Temperature 0°C to +55°C
Working Humidity 5%~95%RH(Non-condensing)
Warranty 1 Year
Period
AIR-CPE1K+ --> PWR, LAN, Wi-Fi, WAN
AIR-CPE5K+ -->SYS,WAN,LAN,5G
AIR-CPE10K+ -->SYS,WAN,LAN,5G

Product Description;

C3500-24X
COMMANDO Marshall C3500 24x 10G SFP+, 2x 100G QSFP28 Uplinks, Fiber Routing Switch HIGHLIGHTS: • 24 x 10G SFP+ ports • 2 x 100G QSFP28 Static Uplink slot • 1 x RJ45 Management port • 1 x RJ45 Console port • 1 x USB Console port • 1 x USB 2.0 Storage port • Switching Capacity: 880 Gbps • Thunder Protection: ±6 kV • Power: 100W • 3 Temperature Control Fan • Power Supply: Dual Power Supplies (AC + DC) • AC: 100~240V 50/60Hz, DC: 12V 8.3A • MarshallOS L3+ IP Services Software Feature Set • L3+ 100G QSFP28 Fiber Routing Switch
Tp-Link TL-WN881ND 300Mbps Wireless N PCI Express Adapter - Adapter Wireless N PCI Express 2.0(x1) Adapter TL-WN881ND allows you to connect a desktop computer to a wireless network and access a high-speed Internet connection. Complying with IEEE 802.11n, they provide wireless speeds up to 300Mbps, which is beneficial for online gaming or even HD video streaming. Wireless N - Speed & Range MIMO (multiple input, multiple output antennas) technologies, show more excellent abilities to mitigate data loss over long distances and through obstacles in a small office or a large apartment, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not! CCA Technology - Stable Wireless Signals Clear Channel Assessment (CCA) automatically avoids channel conflicts using its clear channel selection feature and fully realizes the advantages of channel binding, greatly enhanced the wireless performance. WPA / WPA2 Encryptions WPA/WPA2 encryption standards ensure your wireless connection is safe from intruders. Easy Setup Either using the optimized user interface and setup wizard or the CD (included) setup wizard will allow you to get ‘online’ quickly and easily.
* Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications are based upon test results under normal usage conditions. Actual wireless transmission rate and wireless coverage are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Thank you!

Product Description

Take full advantage of your cutting-edge 4G LTE network with the TL-MR6400, which can achieve download speeds of up to 150Mbps. The TL-MR6400 allows you to share your 4G LTE network with multiple Wi-Fi devices so you can enjoy uninterrupted HD movies, rapid file downloads, and video chats that won’t freeze up.

TL-MR6400 Features

300Mbps Wireless Speed The 4G LTE router provides the 300Mbps Wi-Fi connections that you need for online gaming, HD streaming video, ultra-fast downloads. The integrated antennas allow you to enjoy stable wireless connections and excellent wireless coverage.   No Configuration Required With an integrated 4G LTE modem and a built-in SIM card slot, all you need to do insert a SIM card and turn the router on. Enjoying fast, stable Wi-Fi on a 4G LTE network has never been easier.   Wi-Fi Where You Need It The TL-MR6400 offers unmatched convenience and versatility. It provides the perfect solution in any situation, from relaxing at home to working in a remote location, just plug it in to boost on-site productivity and stay connected in a diverse range of environments. From the exhibition center to the RV, this router has you covered.   Available WAN Connection With the inclusion of the WAN/LAN port, the TL-MR6400 can also support a wide variety of connection types, including cable, fiber, and DSL modems.

HARDWARE HIGHLIGHTS

• SOFTWARE FEATURE SET

L3 Features

• Static Route
• Dynamic Routing, RIPv1/v2, OSPF v1/v2
• Policy-based Routing (PBR) for IPv4 and IPv6
• VRRP
• IGMP v1/v2/v3, IGMP Proxy
• Static Multicast Route
• Multicast Receive Control
• Illegal Multicast Source Detect
• ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP Limit
• Dynamic ARP Inspection (DAI)
• DNS Server, Client, DNS Relay

IPv6 Features

• ICMPv6, ND, DNSv6
• MLD Snooping, IPv6 Multicast VLAN
• MLDv1/v2, IPv6 ACL, IPv6 QoS

QoS

• 13 Queues
• SP, WRR
• Traffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port number
• Traffic Policing
• PRI Mark/Remark
• Surveillance VLAN

ACL

• IP ACL, MAC ACL, IP-MAC ACL
• Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol,
• TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS
• REDIRECT and Accounting based ACL
• Rules can be configured to port, VLAN, VLAN routing interfaces
• Time Ranged ACL

Security

• 802.1x AAA
• Port, MAC based authentication
• Accounting based on time length and traffic
• Guest VLAN and auto VLAN
• RADIUS for IPv4 and IPv6
• TACACS+ for IPv4 and IPv6

DHCPv4/v6 Traffic Monitor

• DHCP Server/Client for IPv4/IPv6
• DHCP Relay/Option 82
• DHCP Snooping/Option 82

Tunneling

• L3 GRE
• 6 to 4
• ISATAP
• IP-in-IP
• Configured Tunnel

L1, L2 Features

• IEEE802.3(10Base-T)
• IEEE802.3u(100Base-TX)
• IEEE802.3z(1000BASE-X)
• IEEE802.3ab(1000Base-T)
• IEEE802.3ae(10GBase), IEEE802.3x
• IEEE802.3an (10GBASE-T)
• Port loopback detection
• LLDP and LLDP-MED
• UDLD
• 802.3ad LACP, 26 Trunk group with max 8 ports
• LACP load balance
• N:1 Port Mirroring
• RSPAN
• ERSPAN
• IEEEE802.1d(STP)
• IEEEE802.1w(RSTP)
• IEEEE802.1s(MSTP)
• Root Guard
• BPDU Guard
• BPDU Tunnel
• IP Source Guard
• 802.1Q, 4K VLAN
• MAC VLAN, Voice VLAN, Protocol VLAN, Multicast VLAN
• QinQ, Selective QinQ, Flexible QinQ
• GVRP
• N:1 VLAN Translation
• Broadcast / Multicast / Unicast Storm Control
• IGMP v1/v2/v3 Snooping and L2 Query
• ND Snooping
• MLDv1/v2 Snooping
• Port Security
• Flow Control: HOL, IEEE802.3x
• Bandwidth Control

Traffic Monitor

• sFlow Traffic Analysis

Security Network Management

• CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6
• Syslog and external Syslog Server HTTP SSL
• SNMP MIB, SNMP TRAP
• FTP/TFTP
• SNTP/NTP
• RMON 1,2,3,9
• Authentication by Radius/TACACS
• SSH v1/v2
• Dual firmware images/ Configuration files

GREEN Features

• IEEE 802.3az (Energy Efficient Ethernet)
• Auto FAN Speed Control, Temperature Alarm
• LED Shut-Off

MIB (Management Information Base) counters

• TCP/IP-based MIB-II (RFC 1213)
• Ethernet-like MIB (RFC 3635)
• Interface Group MIB (RFC 2863)
• RMON (Remote Network Monitoring) MIB (RFC 2819)
• Bridge MIB (RFC 1493)
• Bridge MIB Extension (RFC 2674)

Description

SOFTWARE FEATURE SET (SOLDIEROS L2+)

 

Highlights:

• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
 

L3 Features:

• L3 Static/Default Route
• Gratuitous ARP
• IPv6
 

L2 Features:

• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN – IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror – Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
 

QoS Features:

• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
 

Security Features:

• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
 

Management Features:

• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare