COMMANDO AirONE APO1200 Outdoor Wireless Access Point enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac/b/g/n standard and comes with dual band 2.4GHz+5.8GHz with Wave 2.0 technology and MIMO High Gain Omni 5dBi Internal Antenna. It has Separate Gigabit Ethernet 1 WAN with IEEE 802.3at 48V PoE+ input & 1 LAN port along with IP65 casing. It has a wireless speed of up to 1200Mbps meaning you do not need buffering when surfing, downloading and streaming videos. The quality of the video makes it ideal for connecting surveillance camera systems. Unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.
It is designed for the Outdoors with weather resistant IP65 case specifically for outdoor installations. It has 4 in 1 mode outdoor Access Point with Gateway, Repeater, WISP, and AP mode with range up to 400 meters with up to 500mW input Power. It is industrial grade APO with great communication efficiency, with combined Concurrent speed up to 1200Mbps Wi-Fi speed.
It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It supports IEEE 802.3at 48V PoE+, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
COMMANDO AirONE APO1200 Outdoor AP is Web GUI based easy to use and manage standalone device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100/1000Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS and setting channel bandwidth 20/40MHz wireless band and also can check free channels available with inbuilt Wi-Fi analysis. Its compact size makes it ideal for Outdoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
It provides and offers a wide range of models for different network deployment requirements with Gigabit Ethernet speed. These energy efficient AP are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.
It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. ±6KV Lightning Protection with no Ingress of dust as well as waterproof enclosure.
With 500mW transmission power it provides stable wireless coverage at a range of 400 meters and above depending on outdoor environment.
Support Flexible user Access Control Policies, Network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied to permit or deny Wi-Fi users.
Auto sensing 10/100/1000Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
It has Dual power options with DC input power and IEEE 802.3at 48V PoE+ power input which protect from power failures and increases life of device. It comes with Lighting surge protection Common mode ±6KV and Differential mode ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance with highly reliability, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.
COMMANDO AirONE APO1200 supports software functions as follows.
Device Information like CPU Usage, Memory Usage, LAN Information like IP Mode Get IP From AC/Gateway/Static, Status with 2G/5G Wi-Fi Clients Status with information like SSID, Channel, Bandwidth, Encrypt, MAC Address, Operation Mode configure like AP/ Fat AP Mode with Uptime, Flow in bps for Downstream and Upstream.
Gateway Mode, Repeater Mode, WISP Mode, AP Mode (Default Selection).
2G/5G Wi-Fi Status ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2PSK_TKIPAES, MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option, Wi-Fi Timer Off/ON with Time Frame, Advanced setting like Country Region, 2G/5G, Multicast Fast, Maximum client for APO, WLAN Partition, Short GI, Coverage Threshold(-95dBm~-65dBm), TX Power, DFS.
LAN Settings with DHCP server option, Static DHCP, VLAN Settings & Cloud Server Settings.
URL Filter, IP Filter, MAC Filter & DMZ Settings.
Configure, Reboot, Modify Password, Upgrade, Time, Log, Flow Control, IP Group, Time Group & DDNS Settings.
| SOFTWARE FUNCTION | |
|---|---|
| Wizard Function | Gateway Mode: In Gateway mode, all Ethernet are bridged together, and wireless clients will connect ISP access point or router connecting directly to the Internet via WAN PORT. NAT is enabled and PCs in Ethernet LAN port share the same IP to ISP through wireless LAN. Repeater Mode: In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi network. This mode is suitable when you are in a Wi-Fi dead-zone or a place with weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office. WISP Mode: In WISP mode, the device connects to ISP station or hot spot wirelessly to share network with local wired and wireless devices. AP Mode: In AP mode, the device works as an access point to transform your existing wired network into a wireless network. |
| Flow in bps | For Downstream, Upstream graphs at particular time. |
| Network | LAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server Settings |
| Management | Configure, Reboot, Modify Password, Upgrade firmware, Time setting with NTP and from PC, Log, Restore the factory default |
| Wi-Fi | SSID name setting, Bandwidth, Channel, Encryption options like Open/Encryption like WPA/WPA2PSK_TKIPAES, MAC ACL, Wi-Fi Timer OFF/ON with Time Frame. Advanced setting like Country Region, 2G/5G, Multicast Fast, Maximum clients for APO, WLAN Partition, Short GI, Coverage Threshold (-95dBm~-65dBm), TX Power, DFS. |
| Parameters | Specification |
|---|---|
| Standard | IEEE 802.11ac/b/g/n |
| RAM | 128 MB |
| Flash | 16 MB |
| Interface | 2* 10/100/1000Mbps LAN/WAN ports. |
| Reset | Hardware Reset button/ Restore to Factory Defaults software based |
| Power | DC In 12V, 1.5A or IEEE 802.3at PoE+ |
| User Capacity | 128 |
| Dimension | 257mm * 87mm * 38 mm |
| Temperature & Humidity | 0°C to +50°C & 5%~95% RH Non-Condensing |
| Warranty Period | 1 Year |
| LED | Power, LAN, WAN. |
Supports Dual Radio frequencies 2.4GHz+5.8GHz, IEEE 802.11ac/b/g/n, with Multi SSIDs up to 8 with either open or WPA/WPA2PSK_TKIPAES encryption with Dual option for input Power supply with either IEEE 802.3af/at 48V POE or 12V, 1.5A DC input power.
| Technical Parameters | Specification |
|---|---|
| Hardware Specifications | 1* 10 or 100MbpsMbps auto-negotiation WAN port or IEEE 802.3at IEEE 802.3af/at 48V POE port 1* 10 or 100Mbps auto-negotiation LAN port 1* Reset button/Restore to factory default 1*DC Port MIMO High Gain Omni 5dBi Internal Antenna |
| Memory | 128RAM |
| Flash | 16MB |
| IEEE Standard | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac |
| Data Transfer Rates | IEEE 802.11b up to 11Mbps IEEE 802.11g up to 54Mbps IEEE 802.11n up to 300Mbps IEEE 802.11ac up to 900Mbps |
| Frequency | 2.4GHz+5.8GHz |
| Throughput | Up to 1200Mbps |
| Network Functions | 802.1q Tag based VLAN, DHCP Server, Static, PPPoE |
| Wi-Fi Operational Modes | AP, Repeater, WISP Mode, Gateway Mode |
| Wireless Security | Open or Encryption WPA/WPA2PSK_TKIPAES option |
| Multiple SSID | Up to 8 SSIDs |
| Access control Features | MAC Access Control |
| Enclosure Type | Desktop/Wall/Ceiling mounted |
| Wi-Fi Transmit Power | Up to 500mW |
| Input Power Supply | WAN port IEEE 802.3af/at 48V POE OR DC 12V ,1.5A |
| Management | Web based management Backup & Restore to default Settings |
| ENVIRONMENTAL | Operating Temperature: 0° C to +50° C (+32° F to +122° F) Humidity: 5% to 95% non-condensing Storage and transportation Temperature: -40° C to +70° C (-40° F to +158° F) |
| Weight | <1Kg |
| Features | AIR-APO300 | AIR-APO750 | AIR-APO1200 |
|---|---|---|---|
| Standard | IEEE802.11b/g/n | IEEE802.11ac/b/g/n | IEEE802.11ac/b/g/n |
| Frequency | 2.4GHz | 2.4GHz + 5.8GHz | 2.4GHz + 5.8GHz |
| Wireless data rate | 300Mbps | 300Mbps + 450Mbps | 300Mbps + 900Mbps |
| WAN | 1 * 10/100Mbps | 1 * 10/100Mbps | 1 * 10/100/1000Mbps |
| LAN | 1 * 10/100Mbps | 1 * 10/100Mbps | 1 * 10/100/1000Mbps |
| DC | DC:12V 1.5A | DC:12V 1.5A | DC:12V 1.5A |
| PoE Power | Support 24V POE | IEEE 802.3af/at 48V POE | IEEE 802.3at 48V POE |
| Lightning Level | Common mode: 6KV; Differential mode 2KV | Common mode: 6KV; Differential mode 2KV | Common mode: 6KV; Differential mode 2KV |
| RF Power | 1000mW | 500mW | 500mW |
| Water-proof Level | IP65 | IP65 | IP65 |
| Operation Mode | AP, Gateway, WISP, Repeater, Super WDS | AP, Gateway, WISP, Repeater | AP, Gateway, WISP, Repeater |
| Distance | 400 meters | 400 meters | 400 meters |
| Users Supported | Max: 64, Recommended: 50 | Max: 128, Recommended: 80 | Max: 128, Recommended: 100 |
| Dimensions | 315mm * 145 mm * 80 mm | 315mm * 145 mm * 80 mm | 257mm * 87mm * 38 mm |
| LED Indicator | LED Status |
|---|---|
| Power | IEEE 802.3at 48V PoE+ / 12V, 1.5A DC power given. |
| WAN | Connect with Gateway or IEEE 802.3af/at 48V POE devices and Green shows activity on WAN port. |
| LAN | Connect to end users and Green shows activity on LAN port. |
AIR-APO1200 comes with following Accessories.
| Warranty and Support | |
|---|---|
| Products covered | COMMANDO AirONE AIR-APO1200 Outdoor Wireless Access Point |
| Warranty duration | One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years. |
| Hardware replacement | COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request. |
| End-of-life policy | In case of discontinuation of the product, support is limited to 3 years from announcement date. |
| Effective date | Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO). |
| Support duration | Lifetime support. |
| COMMANDO Care | COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration. |
