COMMANDO Scout E1000 24GE PoE+, 4GE/4SFP Combo Uplinks, 450W, Unmanaged Switch.
COMMANDO Scout E1000 Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, Internet cafes, hotels, schools, and suitable for surveillance. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as PoE/PoE+ with power budget up to 600W capability while reducing energy consumption and minimizing noise. This Series switches are available in 4 to 48 Gigabit Ethernet ports or 4 to 48 Fast Ethernet Ports with 2/4 fixed 1GE copper/ 1G Fiber Uplinks having enclosure type desktop, rack/wall mountable- 1U depending on switch model. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations.
It can be quickly set up with plug and play with Zero Touch Provisioning. It is unmanaged SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250m cable distance.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected. It can also set any ports that are not transmitting traffic to sleep mode.
COMMANDO Scout E1000 Series Switches are easy to use and manage. All switches are Plug-and-Play devices that requires zero configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops as well as rackmount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.
Scout E1000 Series Switches are high power switches and support 75W up to 600W (PoE/PoE+) Power Budget. This Series switches smartly adjust IEEE802.3af / IEEE802.3at PoE/PoE+ (up to 30 Watts per port). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.
Auto sensing/Auto PoE/PoE+ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.
It comes with one or two fans or fan-less models with Small form-factor, compact PoE/PoE+ switch operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.
It Provides additional deployment flexibility, fiber connectivity with separate extra flexible ports or combo ports options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.
It has AC input power which protect from power surges through their inline power supply automatically and have in build Surge protection of ±4KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.
COMMANDO Scout E1000 Series Unmanaged Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
Supports wide range of IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, IEEE802.3af, Power over Ethernet, IEEE802.3at, Power over Ethernet plus.
COMMANDO Scout E1000 Series Smart Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identifies straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
It supports 8K entries in the 4-way hash L2 table for MAC address learning and searching also has two hash algorithms for IVL (Independent VLAN Learning), SVL (Shared VLAN Learning), and IVL/SVL (both Independent and Shared VLAN Learning) for flexible network topology architecture. It also has per-port L2 storm filtering control mechanism which suppresses the flow rate of some specific packets for Unknown Unicast Storm, Unicast Storm, Unknown Multicast Storm, Multicast Storm, and Broadcast Storm. IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-T for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. EEE operational mode supports IEEE 802.3 MAC operation at 1000Mbps. For 100Mbps operation, the 100Base-TX PHY is supported interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling. It supports IEEE 802.3x full duplex flow control. If one port’s received frame buffer is over the pause threshold, a pause-on frame is sent to indicate to the link partner to stop the transmission. When the port’s received frame buffer drops below the pause threshold, it sends a pause-off frame. Auto MDI/MDI-X adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports. Loop protection, If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provides greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled along with power budget up to 600W.
| E1000 Switch Parameter | Specification |
|---|---|
| Flash (KB) | 16Kbytes |
| Packet Buffer Memory | 4.1 MB |
| Switching Method | Store and Forward |
| Switching Capacity | 1.6Gbps to 56Gbps |
| MAC Address Table Size | 8000 entries |
| Maximum packet length | 10000byte |
| Operation Temperature | 0° to 55°C |
| Storage Temperature | -20° to 70°C |
| Operation Humidity (relative, noncondensing) | 10% to 90% |
| Storage humidity (relative, noncondensing) | 5% to 90% |
| Input Power Supply | AC input power 100 to 240V AC or 180 to 240V AC (Model Dependent) |
| LED Indicator | Link/Act，PoE, PoE MAX，Power |
| Energy Saving | Comply with “EEE” Energy Efficient Ethernet (IEEE 802.3az) |
| Surge protection (kV) | ±4 kV |
| Rack-mountable | Desktop, Rack/Wall mountable depending on model |
| Fan (Number) | Fan-less, up to 3 Fan depending on model |
COMMANDO Scout E1000 Series Unmanaged Switches hardware supports L2 VLAN function with IVL, SVL, and IVL/SVL with 2-hash algorithm selection for L2 table searching/learning along with Aging timer range from 0.2s to 1600000s. IEEE 802.1Q VLAN with 4K-entry VLAN Table with limited learned L2 MAC entry on each port and each VLAN. Supports up to 16 spanning tree instances for MSTP (IEEE 802.1s), RSTP, and STP. It has 8K entries in the 4-way hash L2 table for MAC address learning and searching also has two hash algorithms for IVL (Independent VLAN Learning), SVL (Shared VLAN Learning), and IVL/SVL (both Independent and Shared VLAN Learning) for flexible network topology architecture. Independent 512-entry L2/IP Multicast table for multicast function. Supports Reserved Multicast Addresses processing.
It also has per-port L2 storm filtering control mechanism which suppresses the flow rate of some specific packets for Unknown Unicast Storm, Unicast Storm, Unknown Multicast Storm, Multicast Storm, and Broadcast Storm. IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-Te for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. EEE operational mode supports IEEE 802.3 MAC operation at 100Mbps. For 100Mbps operation, the 100Base-TX PHY is supported interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling.
It Supports broadcast, multicast, unknown- multicast, and unknown-unicast packet suppression control, IEEE 802.1x, IEEE 802.3az Energy Efficient Ethernet (EEE), IEEE 802.3x full duplex flow control. If one port’s received frame buffer is over the pause threshold, a pause-on frame is sent to indicate to the link partner to stop the transmission. When the port’s received frame buffer drops below the pause threshold, it sends a pause-off frame. It has Auto MDI/MDI-X, to adjusts automatically for straight-through or crossover cables on all 10/100/1000 speed ports. Loop protection, If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provides greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled along with power budget up to 600W.
| Product Code | Ports | Main Interface | Uplink Interfaces |
|---|---|---|---|
| E1000-4P+2FE | 4 x 10/100M PoE+ ports 2 x 1FE Uplink slots |
4 FE | 2FE |
| E1000-8P+2FE | 8 x 10/100M PoE+ ports 2 x 1FE Uplink slots |
8 FE | 2 FE |
| E1000-8P+2GE | 8 x 10/100M PoE+ ports 2 x 1GE Uplink slots |
8 FE | 2 GE |
| E1000-8P+2SFP | 8 x 10/100 PoE+ ports 2 x 1G SFP Uplink slots |
8 FE | 2 SFP |
| E1000-16P+4CF | 16 x 10/100 PoE+ ports 2 x 1GE or 2x 1G SFP combo Uplink slots |
16 FE | 2GE or 2SFP |
| E1000-24P+4CF | 24 x 10/100 PoE+ ports 2 x 1GE or 2x 1G SFP combo Uplink slots |
24 FE | 2GE or 2SFP |
| E1000-48P+4CF | 48 x 10/100 PoE+ ports 2 x 1GE or 2x 1G SFP combo Uplink slots |
48 FE | 2GE or 2SFP |
| E1000-4G+2GE | 4 x 10/100/1000M ports 2 x 1GE Uplink slots |
4 GE | 2 GE |
| E1000-8G+2GE | 8 x 10/100/1000M ports 2 x 1GE Uplink slots |
8 GE | 2 GE |
| E1000-8G+2SFP | 8 x 10/100/1000M ports 2 x 1G SFP Uplink slots |
8 GE | 2 SFP |
| E1000-16G+4CF | 16 x 10/100/1000M ports 2 x 1GE and 2x 1G SFP Uplink slots |
16 GE | 2GE and 2SFP |
| E1000-24G+4CF | 24 x 10/100/1000M ports 2 x 1GE and 2x 1G SFP Uplink slots |
24 GE | 2GE and 2SFP |
| E1000-4GP+2GE | 4 x 10/100/1000M PoE+ ports 2 x 1GE Uplink slots |
4 GE | 2 GE |
| E1000-8GP+2SFP | 8 x 10/100/1000M PoE+ ports 2 x 1G SFP Uplink slots |
8 GE | 2 SFP |
| E1000-8GP+4CF | 8 x 10/100/1000M PoE+ ports 2 x 1GE and 2x 1G SFP Uplink slots |
8 GE | 2 GE and 2SFP |
| E1000-16GP+4CF | 16 x 10/100/1000M PoE+ ports 2 x 1GE and 2x 1G SFP Uplink slots |
16 GE | 2 GE and 2SFP |
| E1000-24GP+4CF | 24 x 10/100/1000M PoE+ ports 2 x 1GE and 2x 1G SFP Uplink slots |
16 GE | 2 GE and 2SFP |
| E1000-24GP+8CF | 24 x 10/100/1000M PoE+ ports 4 x 1GE or 4x 1G SFP Uplink slots |
24 GE | 4 GE or 4SFP Combo |
| Product Code | Enclosure Type | Fan (Number) | Voltage (Auto Ranging, Frequency 50Hz to 60Hz) | Current |
|---|---|---|---|---|
| E1000-4P+2FE | Desktop | Fan-less | 180 to 240V AC | 12V to 4A |
| E1000-8P+2FE | Desktop, Rack/Wall mountable | Fan-less | 180 to 240V AC | 12V to 2A |
| E1000-8P+2GE | Desktop, Rack/Wall mountable | Fan-less | 180 to 240V AC | 12V to 2A |
| E1000-8P+2SFP | Desktop, Rack/Wall mountable | Fan-less | 180 to 240V AC | 12V to 2A |
| E1000-16P+4CF | Rack/Wall mountable - 1U | 1 | 180 to 240V AC | 12V to 2A |
| E1000-24P+4CF | Rack/Wall mountable - 1U | 1 | 180 to 240V AC | 54V to 1.39A |
| E1000-48P+4CF | Rack/Wall mountable - 1U | 3 | 180 to 240V AC | 54V to 2.78A |
| E1000-4G+2GE | Desktop | Fan-less | 180 to 240V AC | 54V to 2.78A |
| E1000-8G+2GE | Desktop, Rack/Wall mountable | Fan-less | 180 to 240V AC | 54V to 2.78A |
| E1000-8G+2SFP | Desktop, Rack/Wall mountable | Fan-less | 180 to 240V AC | 54V to 2.78A |
| E1000-16G+4CF | Rack/Wall mountable - 1U | Fan-less | 180 to 240V AC | 52V to 10.6A; 12V to 4.1A |
| E1000-24G+4CF | Rack/Wall mountable | Fan-less | 180 to 240V AC | 54V to 2.78A |
| E1000-4GP+2GE | Desktop | Fan-less | 180 to 240V AC | 54V to 4.5A; 12V to 2A |
| E1000-8GP+2SFP | Rack/Wall mountable - 1U | Fan-less | 180 to 240V AC | 54V to 7.5A；12V to 4A |
| E1000-8GP+4CF | Rack/Wall mountable - 1U | Fan-less | 180 to 240V AC | 54V to 7.5A；12V to 4A |
| E1000-16GP+4CF | Rack/Wall mountable - 1U | 1 | 180 to 240V AC | 54V to 7.5A；12V to 4A |
| E1000-24GP+4CF | Rack/Wall mountable - 1U | 1 | 180 to 240V AC | 54V to 7.5A；12V to 4A |
| E1000-24GP+8CF | Rack/Wall mountable - 1U | 1 | 180 to 240V AC | 54V to 7.5A；12V to 4A |
IEEE 802.3X Flow Control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3 af/at Power over Ethernet (PoE/PoE+) Provides up to 30 W per port having power budget up to 600W, which allows support of the latest PoE/PoE+ capable devices such as Video IP phones, wireless access points, and advanced pan/tilt/zoom security cameras, as well as any 15.4 W IEEE 802.3af-compliant end device up to 250m cable length. This ensures that cost of additional electrical cabling and circuits reduced to zero. PoE/ PoE+ availability on all ports. Auto-PoE power configuration means switch automatically assigns the required power to a port for a PD device.
| Product Code | Power Budget | Max no. of PoE+ (IEEE 802.3at) Ports | Max no. of PoE (IEEE 802.3af) Ports |
|---|---|---|---|
| E1000-4P+2FE | 75W | 2 ports up to 30W | All ports up to 15.4W |
| E1000-8P+2FE | 150W | 4 ports up to 30W | All ports up to 15.4W |
| E1000-8P+2GE | 150W | 4 ports up to 30W | All ports up to 15.4W |
| E1000-8P+2SFP | 150W | 4 ports up to 30W | All ports up to 15.4W |
| E1000-16P+4CF | 260W | 8 ports up to 30W | All ports up to 15.4W |
| E1000-24P+4CF | 450W | 12 ports up to 30W | All ports up to 15.4W |
| E1000-48P+4CF | 600W | 24 ports up to 30W | All ports up to 15.4W |
| E1000-4G+2GE | - | - | - |
| E1000-8G+2GE | - | - | - |
| E1000-8G+2SFP | - | - | - |
| E1000-16G+4CF | - | - | - |
| E1000-24G+4CF | - | - | - |
| E1000-4GP+2GE | 75W | 2 ports up to 30W | All ports up to 15.4W |
| E1000-8GP+2SFP | 150W | 4 ports up to 30W | All ports up to 15.4W |
| E1000-8GP+4CF | 150W | 4 ports up to 30W | All ports up to 15.4W |
| E1000-16GP+4CF | 260W | 8 ports up to 30W | All ports up to 15.4W |
| E1000-24GP+4CF | 450W | 12 ports up to 30W | All ports up to 15.4W |
| E1000-24GP+8CF | 450W | 12 ports up to 30W | All ports up to 15.4W |
The switching capacity indicates the total data exchange capability of the switch, in Gbps. MTBF is a basic measure of a systems reliability. This Series Switch is having higher MTBF, means very reliable product.
| Product Code | Switching Capacity (Gbps) | Packet Filtering Forwarding Rates (64-byte packet size Mpps) | Mean time between failures MTBF (hours) | Heat dissipation (BTU/hr) |
|---|---|---|---|---|
| E1000-4P+2FE | 1.2 | 0.89 | 258465 | 163.78 |
| E1000-8P+2FE | 2 | 1.48 | 249856 | 81.89 |
| E1000-8P+2GE | 5.6 | 4.10 | 341125 | 81.89 |
| E1000-8P+2SFP | 5.6 | 4.10 | 365546 | 81.89 |
| E1000-16P+4CF | 7.2 | 5.35 | 415632 | 81.89 |
| E1000-24P+4CF | 8.8 | 6.54 | 245461 | 255.91 |
| E1000-48P+4CF | 13.6 | 10.11 | 285465 | 511.82 |
| E1000-4G+2GE | 12 | 8.92 | 345161 | 511.82 |
| E1000-8G+2GE | 20 | 14.88 | 348952 | 511.82 |
| E1000-8G+2SFP | 20 | 14.88 | 384951 | 511.82 |
| E1000-16G+4CF | 40 | 29.76 | 384902 | 511.82 |
| E1000-24G+4CF | 56 | 41.66 | 405023 | 81.89 |
| E1000-4GP+2GE | 12 | 8.92 | 405023 | 81.89 |
| E1000-8GP+2SFP | 20 | 14.88 | 284556 | 1535.46 |
| E1000-8GP+4CF | 24 | 18.86 | 284556 | 1535.46 |
| E1000-16GP+4CF | 40 | 29.76 | 284556 | 1535.46 |
| E1000-24GP+4CF | 56 | 41.66 | 284556 | 1535.46 |
| E1000-24GP+8CF | 56 | 41.66 | 284556 | 1535.46 |
| LED Indication on Switch | LED Status |
|---|---|
| Power | Green OFF: No power on the switch. Green ON: The switch powered on |
| Link/Act | LINK/ACT bi-color LED: OFF: Port disconnected or link fail. Green ON: 1000Mbps connected. Amber ON: 10/100Mbps connected. Green Flashing: 1000Mbps connected and Data in transit Amber Flashing: 10/100Mbps connected and Data in transit |
| System | Green OFF: The system is starting, please wait Green ON: The system is up and running |
| PoE | OFF: PoE/PoE+ power is not provided on port Blue ON: PoE/PoE+ power is provided on port |
| PoE MAX | PoE MAX OFF: PoE Power budget is available in switch Red ON: PoE Power budget is 95% |
| Connection Cable Type | Category and Speed | Maximum Cable Distance Supported |
|---|---|---|
| Unshielded Twisted Pair cable | 10/100Base-TX: UTP category 5/5e/6 cables (Maximum 100m) 1000Base-T: UTP Category 5/5e/6 cable (Maximum 100m) |
100M |
| Shielded Twisted Pair cable | 10/100Base-TX: STP category 5/5e/6 cables (Maximum 250m) 1000Base-T: UTP Category 5/5e/6 cable (Maximum 100m) |
100M |
| Optical Fiber Cable | 550M~120KM Depending on SFP | 120KM |
All Soldier E1000 Series Switches are made available for use globally along with accessories in the bundle to facilitate for enhance operations.
The switch box comes included with the following accessories:
