COMMANDO Scout E1000 8GE PoE+

Specifications

COMMANDO Scout E1000 Series Smart Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identifies straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.

It supports 8K entries in the 4-way hash L2 table for MAC address learning and searching also has two hash algorithms for IVL (Independent VLAN Learning), SVL (Shared VLAN Learning), and IVL/SVL (both Independent and Shared VLAN Learning) for flexible network topology architecture. It also has per-port L2 storm filtering control mechanism which suppresses the flow rate of some specific packets for Unknown Unicast Storm, Unicast Storm, Unknown Multicast Storm, Multicast Storm, and Broadcast Storm. IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-T for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. EEE operational mode supports IEEE 802.3 MAC operation at 1000Mbps. For 100Mbps operation, the 100Base-TX PHY is supported interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling. It supports IEEE 802.3x full duplex flow control. If one port’s received frame buffer is over the pause threshold, a pause-on frame is sent to indicate to the link partner to stop the transmission. When the port’s received frame buffer drops below the pause threshold, it sends a pause-off frame. Auto MDI/MDI-X adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports. Loop protection, If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provides greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled along with power budget up to 600W.

Table 1. COMMANDO Scout E1000 Series Unmanaged Switches Technical Specifications

COMMANDO Scout E1000 Series Unmanaged Switches hardware supports L2 VLAN function with IVL, SVL, and IVL/SVL with 2-hash algorithm selection for L2 table searching/learning along with Aging timer range from 0.2s to 1600000s. IEEE 802.1Q VLAN with 4K-entry VLAN Table with limited learned L2 MAC entry on each port and each VLAN. Supports up to 16 spanning tree instances for MSTP (IEEE 802.1s), RSTP, and STP. It has 8K entries in the 4-way hash L2 table for MAC address learning and searching also has two hash algorithms for IVL (Independent VLAN Learning), SVL (Shared VLAN Learning), and IVL/SVL (both Independent and Shared VLAN Learning) for flexible network topology architecture. Independent 512-entry L2/IP Multicast table for multicast function. Supports Reserved Multicast Addresses processing.

It also has per-port L2 storm filtering control mechanism which suppresses the flow rate of some specific packets for Unknown Unicast Storm, Unicast Storm, Unknown Multicast Storm, Multicast Storm, and Broadcast Storm. IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-Te for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. EEE operational mode supports IEEE 802.3 MAC operation at 100Mbps. For 100Mbps operation, the 100Base-TX PHY is supported interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling.

It Supports broadcast, multicast, unknown- multicast, and unknown-unicast packet suppression control, IEEE 802.1x, IEEE 802.3az Energy Efficient Ethernet (EEE), IEEE 802.3x full duplex flow control. If one port’s received frame buffer is over the pause threshold, a pause-on frame is sent to indicate to the link partner to stop the transmission. When the port’s received frame buffer drops below the pause threshold, it sends a pause-off frame. It has Auto MDI/MDI-X, to adjusts automatically for straight-through or crossover cables on all 10/100/1000 speed ports. Loop protection, If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provides greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled along with power budget up to 600W.

Table 2. COMMANDO Scout E1000 Series Unmanaged Switches Basic Hardware Specifications

Table 3. COMMANDO Scout E1000 Series Unmanaged Switches Enclosure, Fan, Voltage and current Specifications

IEEE 802.3X Flow Control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3 af/at Power over Ethernet (PoE/PoE+) Provides up to 30 W per port having power budget up to 600W, which allows support of the latest PoE/PoE+ capable devices such as Video IP phones, wireless access points, and advanced pan/tilt/zoom security cameras, as well as any 15.4 W IEEE 802.3af-compliant end device up to 250m cable length. This ensures that cost of additional electrical cabling and circuits reduced to zero. PoE/ PoE+ availability on all ports. Auto-PoE power configuration means switch automatically assigns the required power to a port for a PD device.

Table 4. COMMANDO Scout E1000 Series Unmanaged Switches Advanced Hardware specifications

The switching capacity indicates the total data exchange capability of the switch, in Gbps. MTBF is a basic measure of a systems reliability. This Series Switch is having higher MTBF, means very reliable product.

Table 5. COMMANDO Scout E1000 Series Unmanaged Switches Switching capacity and MTBF specifications

Table 6. COMMANDO Scout E1000 Series Unmanaged Switches LED Indication

Table 7. COMMANDO Scout E1000 Series Unmanaged Switches Cable Lengths

Included in the bundle/box

All Soldier E1000 Series Switches are made available for use globally along with accessories in the bundle to facilitate for enhance operations.

The switch box comes included with the following accessories: