COMMANDO SG/SF Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, internet cafes, hotels, schools, and others. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds as well as PoE/PoE+ capability while reducing energy consumption and minimizing noise. This series switches are available in 4 to 24 Gigabit Ethernet ports, 4 to 24 Fast Ethernet Ports and 2 modular Copper/fiber Uplinks . Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations.
It can be quickly set up with plug and play with Zero Touch Provisioning for SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+ reliable performance at a very affordable cost. This switch Giga ethernet high-speed network connectivity, auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables.
It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. It can smartly automatically adjust the PoE/PoE+ power output for transmissions based on the cable length for PoE/PoE+ devices connected . It can also set any ports that are not transmitting traffic to sleep mode.
COMMANDO SG/SF Series Switches are easy to use and manage. All switches are unmanaged, Plug-and-Play devices that requires no configuration, so setup is simple and hassle-free. It is having desktop or rack mounting /wall mounting enclosure option as per model basis . Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (Either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.
COMMANDO SG/SF Series Switches some models Support up to 150W (PoE/PoE+) Power Budget. This series switches smartly adjust IEEE802.3af/ IEEE802.3at PoE/PoE+ (up to 30 watts per port). All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.
Auto sensing/Auto PoE/PoE+ 10/100 or 10/100/1000M ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.
Small form-factor, fanless design for silent operation. Perfect for noise sensitive environments.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.
Provides additional deployment flexibility, fiber connectivity combo options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.
It has DC input power to enable UPS to mitigate power supply failures. It automatically senses when the internal power supply of a connected device fails and provides power to that device, preventing loss of network traffic and support critical network infrastructure. These series Switches protect from power surges through their inline power supply automatically and have in build Surge protection of ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.
COMMANDO SG/SF Series Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
COMMANDO SG/SF series Switches supports IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af/at. Supported Auto-MDIX function automatically identify straight forward cable and cross-over cable. Support port auto-negotiation function (Automatically negotiate transmission rate and Duplex modes). Support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.
|SG/SF Switch Parameter||Specification|
|Switching Method||Store and Forward|
|MAC Address Table Size||2000 entries|
|Maximum packet length||2048 bytes|
|Operation Temperature||0° to 55°C|
|Storage Temperature||-20° to 70°C|
|Operation Humidity(relative, non condensing)||10% to 90%|
|Storage humidity(relative, non condensing)||5% to 90%|
|Input Power Supply||12V DC, 1A and 52V DC, 1.44A (Model Dependent)|
|LED Indicator||Link/Act, PoE, Power|
|Energy Saving||Comply with “EEE” Energy Efficient Ethernet (IEEE 802.3az)|
|Surge protection (kV)||±2 kV|
|Rack-mountable||Desktop and Rack-mountable|
Auto MDI/MDI-X adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports. Loop protection, if the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms. SFP fiber uplinks provide greater distance connectivity using Gigabit fiber uplinks. The switch provides an estimated cumulative energy savings due to green Ethernet features being auto enabled.
|SR||Product Code||Ports||Main Interface||Uplink Interfaces||Power Budget||Enclosure Type|
|2||SF100-5||5 10/100M ports||5 FE||-||5W||Desktop|
|4||SG100-5||24 10/100/1000M ports||5 GE||-||12W||Desktop|
|5||SF100-8||8 10/100M ports||8 FE||-||12W||Desktop|
|6||SF300-4P+2FE||8 10/100 ports
2 10/100/100M SFP Uplink slot
|7||SF100-16||16 10/100 ports||16 FE||-||24W||Rack/Wall mountable - 1U|
|8||SF100-16D||16 10/100M ports||16 FE||-||24W||Desktop|
|9||SF300-8P+2FE||8 10/100M ports
2 10/100M Uplink slot
|8 FE||2 FE||120W||Desktop|
|10||SF100-24||4 10/100M ports||24 FE||-||24W||Desktop|
|11||SG100-24||24 10/100/1000M ports||24 GE||-||24W||Desktop|
IEEE 802.3X Flow Control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3 af/at Power over Ethernet (PoE/PoE+) Provides up to 30 W per port, which allows support of the latest PoE/PoE+ capable devices such as Video IP phones, wireless access points, and advanced pan/tilt/zoom security cameras, as well as any 15.4 W IEEE 802.3af-compliant end device. This ensures that cost of additional electrical cabling and circuits reduced to zero. PoE/ PoE+ availability on all ports. Auto-PoE power configuration means switch automatically assigns the required power to a port for a PD device.
|SR #||Product Code||Max no. of PoE+ (IEEE 802.3at) Ports||Max no. of PoE (IEEE 802.3af) Ports|
|6||SF300-4P+2FE||2 ports up to 30W||All ports up to 15.4W|
|9||SF300-8P+2FE||3 ports up to 30W||All ports up to 15.4W|
|LED Indication on Switch||LED Status|
|Power||Green OFF: No power on the switch.
Green ON: The switch powered on
|Link/Act||LINK/ACT bi-color LED:
OFF: Port disconnected or link fail.
Green ON: 1000Mbps connected.
Amber ON: 10/100Mbps connected.
Green Flashing: 1000Mbps connected and Data in transit
Amber Flashing: 10/100Mbps connected and Data in transit
|PoE||OFF: PoE/PoE+ power is not provided on port
Blue ON: PoE/PoE+ power is provided on port
All SG/SF Series Unmanaged Switches are made available for use globally along with accessories in the bundle to facilitate for enhance operations.
The switch box comes included with the following accessories:
|Warranty and Support|
|Products covered||COMMANDO SG/SF Series Unmanaged Switches|
|Warranty duration||One Year RTB (Return To Base) replacement warranty.|
|Hardware replacement||COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request.|
|End-of-life policy||In case of discontinuation of the product, support is limited to 3 years from announcement date.|
|Effective date||Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO).|
|Support duration||Lifetime support.|
|COMMANDO Care||COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration.|
|Online Portal Access||Warranty allows guest access to commandonetworks.com for all available technical queries.|