COMMANDO AirONE AIR-AP300 Indoor Wireless Access Point enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE802.11N/G/B standard with single band 2.4GHz with separate Fast Ethernet WAN with 48V, 802.3af POE input & LAN port.
It is 4 in 1 mode Access Point with Gateway, Repeater, WISP and Wireless AP mode with range 45 meters and above depending on surrounding conditions with up to 500mW input Power. It is industrial grade Wall/Ceiling PoE Wireless Indoor Access Point with speed up to 300Mbps Wi-Fi speed depending on models, equipped with separate Fast Ethernet WAN & LAN port which enhances the sharing of files, photo, audio, video and gaming experience over wireless network.
It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It supports (IEEE 802.3af) PoE, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
COMMANDO AirONE Indoor AP300 is WEB GUI based easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS and setting channel bandwidth 20/40MHz wireless band and also can check free channels available with inbuilt Wi-Fi analysis. Its compact size makes it ideal for Indoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
It provides and offers a wide range of models for different network deployment requirements with Fast Ethernet speed. These energy efficient AP is well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.
Supports up to 64 Max wireless users/clients up to distance of 45 meters and above from AP in all directions.
Support Flexible user Access Control Policies, Network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied to permit or deny Wi-Fi users.
Auto sensing 10/100Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
It has Dual power options with DC input power and PoE power input which protect from power failures and increases life of device. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.
COMMANDO AirONE AIR-AP300 Indoor Wireless Access Point supports software functions as follows:
Device Information like CPU Usage, Memory Usage, LAN Information like IP Mode Get IP From AC/Gateway/Static, Status with 2G Wi-Fi, Clients Status with information like SSID, Channel, Bandwidth, Encrypt, MAC Address, Operation Mode configure like AP/ Fat AP Mode with Uptime, Flow in bps for AP Downstream and AP Up stream
Gateway Mode, Repeater Mode, WISP Mode, AP Mode (Default Selection)
2G Wi-Fi Basic and VAP (1 to 3) ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2PSK_TKIPAES, MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option, Wi-Fi Timer Off/ON with Time Frame, Advanced setting like Country Region, 2G Channel (1-13), Multicast Fast, Maximum for per AP (Range 1-64), WLAN Partition, Short GI, Coverage Threshold(-95dBm~-65dBm), TX Power, DFS.
LAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server Settings
Configure, Reboot, Modify Password, Upgrade, Time, Log
Software Function | |
---|---|
Wizard Function | Gateway Mode: In Gateway mode, all Ethernet is bridged together, and wireless clients will connect ISP access point or router connecting directly to the Internet via WAN PORT. NAT is enabled and PCs in Ethernet LAN port this is the same IP to ISP through wireless LAN. Repeater Mode: In Repeater mode is used to extend the range of wireless coverage of existing Wi-Fi network. This mode is suitable when you is in a Wi-Fi dead-zone or a place with weak wireless signal, and you want to have a larger effective range of the wireless signal throughout your home or office. WISP Mode: In WISP mode, the device connects to ISP station or hot spot wirelessly to this is network with local wired and wireless devices. AP Mode: In AP mode, the device works as an access point to transform your existing wired network into a wireless network. |
Flow in bps | For AP downstream and AP Up stream |
Network | LAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server Settings |
Management | Configure, Reboot, Modify Password, Upgrade firmware, Time setting with NTP and from PC, Log, Restore the factory default |
Wi-Fi | SSID name setting, Bandwidth, Channel, Encryption options like Open/Encryption like WPA/WPA2PSK_TKIPAES, MAC ACL, Wi-Fi Timer OFF/ON with Time Frame. Advanced setting like Country Region, 2G Channel (1-13), Multicast Fast, Maximum clients for AP (Range 1-64), WLAN Partition, Short GI, Coverage Threshold (-95dBm~-65dBm), TX Power, DFS. |
Hardware Specifications | Hardware Specifications |
---|---|
Standard | IEEE 802.11 b/g/n technology |
RAM | 128MB |
Flash | 16MB |
Interface | 10/100Mbps LAN/WAN |
Reset | Hardware button |
Power | DC 12V 1A or IEEE802.3af via WAN |
User Capacity | Up to 64 |
Dimension | 168mmX168mmX32mm |
Working Temperature | 0°C to +50°C |
Working Humidity | 5%~95%RH (Non-condensing) |
Warranty Period | 1 Year |
Indicator Light | Power, LAN, WAN |
Supports 2.4GHz, IEEE802.11b/g/n, with Standalone model with Multi SSIDs up to 4 with either open or WPA/WPA2PSK_TKIPAES encryption with Dual option for input Power supply with either 48V PoE (IEEE 802.3af) or DC input power.
Technical Parameters | Specification |
---|---|
Hardware Specifications | 1*10/100Mbps auto-negotiation WAN port or IEEE 802.3af PoE port 1*10/100Mbps auto-negotiation LAN port 1* Reset button/Restore to factory default 1*DC Port |
Memory | 128MB RAM |
Flash | 16MB |
IEEE Standard | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Data Transfer Rates | Single band IEEE 802.11b up to 11Mbps IEEE 802.11g up to 54Mbps IEEE 802.11n up to 300Mbps |
Frequency | Radio 2.4GHz |
Throughput | Up to 300Mbps |
Network Functions | 802.1q Tag based VLAN, DHCP Server, Static, PPPoE |
Wi-Fi Operational Modes | AP, Repeater, WISP Mode, Gateway Mode |
Wireless Security | Open or Encryption WPA/WPA2PSK_TKIPAES option |
Multiple SSID | Up to 4 SSIDs. |
Access control Features | MAC Access Control |
Enclosure Type | Desktop/Wall mounted |
Wi-Fi Transmit Power | Up to 27dbm |
Input Power Supply | WAN port PoE IEEE802.3af OR DC 12V ,1A |
Management | Web based management Backup & Restore to default Settings |
ENVIRONMENTAL | Operating Temperature: 0° C to +50° C (+32° F to +122° F) Humidity: 5% to 95% non-condensing Storage and transportation Temperature: -40° C to +70° C (-40° F to +158° F) |
Weight | <1Kg |
Features | AIR-AP2200 | AIR-AP1300 | AIR-AP1200 | AIR-AP750 | AIR-AP300 |
---|---|---|---|---|---|
FIT/FAT Protocol | FIT/FAT AP | FIT/FAT AP | FIT/FAT AP | FIT/FAT AP | FIT/FAT AP |
Flash | 32MB | 32MB | 16MB | 16MB | 16MB |
RAM | 512MB | 512MB | 128MB | 128MB | 128MB |
Standard | IEEE802.11AC/N/G/B | IEEE802.11AC/N/G/B | IEEE802.11AC/N/G/B | IEEE802.11AC/N/G/B | IEEE802.11N/G/B |
Frequency | 2.4GHz+5GHz+5GHz | 2.4GHz+5GHz | 2.4GHz+5GHz | 2.4GHz+5GHz | 2.4GHz |
Wireless data rate | 400Mbps+900Mbps+900Mbps | 400Mbps+900Mbps | 300Mbps+900Mbps | 300Mbps+450Mbps | 300Mbps |
WAN | 10/100/1000M WAN*1 | 10/100/1000M WAN*1 | 10/100/1000M WAN*1 | 10/100M WAN*1 | 10/100M WAN*1 |
LAN | 10/100/1000M LAN*1 | 10/100/1000M LAN*1 | 10/100/1000M LAN*1 | 10/100M LAN*1 | 10/100M LAN*1 |
DC | DC:12V 2A | DC:12V 1.5A | DC:12V 1.5A | DC:12V 1.5A | DC:12V 1A |
PoE Power | WAN Port 48V 802.3at POE+ | WAN Port 48V 802.3at POE+ | WAN Port 48V 802.3at POE+ | WAN Port 48V 802.3at POE+ | WAN Port 48V 802.3af POE |
Technology Supported | Wave 2 | Wave 2 | Wave 2 | - | - |
Modes Supported | 4 in 1 | 4 in 1 | 4 in 1 | 4 in 1 | 4 in 1 |
Frequency Band | 2.4 GHz + 5 GHz + 5GHz | 2.4GHz+5GHz | 2.4GHz+5GHz | 2.4GHz+5GHz | 2.4GHz |
RF Power | ≤26dBm | ≤26dBm | ≤28dBm | ≤27dBm | ≤27dBm |
Distance covered | Up to 91 Meters | Up to 91 Meters | Up to 91 Meters | Up to 91 Meters | Up to 45 Meters |
Size | 198mmx198mmx28mm | 198mmx198mmx28mm | 198mmx198mmx28mm | 188mmX188mmX50mm | 168mmX168mmX32mm |
Max. SSID | Up to 12 | Up to 8 | Up to 8 | Up to 8 | Up to 4 |
End Users | Access users 256 max, concurrent end users 200 | Access end users 128 max, concurrent end users 100 | Access end users 128 max, concurrent end users 120 | Access end users 128 max, concurrent end users 90 | Access end users 64 max, concurrent end users 50 |
LED Indicator | LED Status |
---|---|
Power | Green Blinking: Power ON Indication Blue and Blinking: Wi-Fi indication that SSID now available for use. |
WAN | Upper LED WAN: Connect with Gateway or PoE devices and Green Blinking shows activity on WAN port. |
LAN | Lower LED LAN: Connect to end users and Green ON shows activity on LAN port. |
COMMANDO AirONE AIR-AP300 Indoor Access Point comes with following Accessories:
Warranty and Support | |
---|---|
Products covered | COMMANDO AirONE AIR-AP300 Wireless Access Point |
Warranty duration | One Year RTB (Return To Base) replacement warranty – optionally extendable up to 3 years. |
Hardware replacement | COMMANDO, its resellers or its service center will use commercially reasonable efforts to replace the product subject to stock availability. Otherwise, a replacement will be arranged within 15 working days after receipt of the Return Materials Authorization (RMA) request. |
End-of-life policy | In case of discontinuation of the product, support is limited to 3 years from announcement date. |
Effective date | Hardware warranty commences from the date of shipment to customer (and in case of resale by a COMMANDO reseller, not more than 90 days after original shipment by COMMANDO). |
Support duration | Lifetime support. |
COMMANDO Cis | COMMANDO will provide 24x7 support for basic configuration, diagnosis, and troubleshooting of device-level problems for up to one year from the date of shipment of the originally purchased product. This support does not include solution or network-level support beyond the specific device under consideration. |
Settings | COMMANDO AirONE 300Mbps remove | COMMANDO Soldier E2000 24GE PoE+ remove | TP LINK 300Mbps Wireless N PCI Express Adapter remove | COMMANDO Soldier C2000 48GE PoE+, remove | AC1200 Wireless Dual Band Router - ARCHER C50 remove | COMMANDO Soldier C2000 24GE PoE+ remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | COMMANDO AirONE 300Mbps remove | COMMANDO Soldier E2000 24GE PoE+ remove | TP LINK 300Mbps Wireless N PCI Express Adapter remove | COMMANDO Soldier C2000 48GE PoE+, remove | AC1200 Wireless Dual Band Router - ARCHER C50 remove | COMMANDO Soldier C2000 24GE PoE+ remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SKU | AIR-AP300 | E2000-24GP+8CF | TL-WN881ND | C2000-48GP+8CF | Archer C50 | C2000-24GP+8CF | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Price | UGX 274,000 | UGX 1,763,000 | UGX 55,000 | UGX 3,676,000 | UGX 127,000 | UGX 2,704,000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description | Features:
| COMMANDO Soldier C2000 48GE PoE+, 4GE/4SFP Combo Uplinks, 800W, Managed Switch. |
| COMMANDO Soldier C2000 24GE, 4GE/4SFP Combo Uplinks, Managed Switch. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Content | Product OverviewCOMMANDO AirONE AIR-AP300 Indoor Wireless Access Point enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE802.11N/G/B standard with single band 2.4GHz with separate Fast Ethernet WAN with 48V, 802.3af POE input & LAN port. It is 4 in 1 mode Access Point with Gateway, Repeater, WISP and Wireless AP mode with range 45 meters and above depending on surrounding conditions with up to 500mW input Power. It is industrial grade Wall/Ceiling PoE Wireless Indoor Access Point with speed up to 300Mbps Wi-Fi speed depending on models, equipped with separate Fast Ethernet WAN & LAN port which enhances the sharing of files, photo, audio, video and gaming experience over wireless network. It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It supports (IEEE 802.3af) PoE, which helps in easy installation by eliminating the need of a dedicated power source and need of a power adapter. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.Product Highlights•Multiple Operational Modes like Gateway Mode, Repeater mode, WISP mode, AP mode (default mode is AP mode).
•Multi SSID up to 4 with inbuilt WI-FI channel analysis.
•Supports IEEE 802.11b/g/n 2.4GHz Wireless which having single band with radio RF Power up to 27dBm.
•Support wireless RF power adjustable as per user movements from AP.
•Access end users up to 64 max, with concurrent end users up to 50.
•Support tag VLAN and VLAN management.
•Supports intelligent load balance based on users.
•Support seamless roaming and low-rate terminal access.
•Dual purposes WAN or IEEE 802.3af Port (PoE) port supporting 1x 10/100Mbps.
•Dedicated LAN ports 1x 10/100Mbps.
•Supports Wi-Fi client distance 45 meters and above depending on surrounding conditions.
•Dual input for power either PoE or DC power inputs 12V, 1A.
•Support Open or encryption like WPA/WPA2PSK_TKIPAES.
•Plug and Play design simplifies installation with self-adaption.
•Compact, silent design perfect for noise sensitive environments.
•With Zero Touch Provisioning: Plug and play and no setup. Affordable, Easy-to-Use AP for Small Business Networks, with Zero Configuration Required.
•Built-in High-Performance Processor with long life, Suitable for Deployment of Large Scale Commercial Scenarios
•Comes with one-year default warranty – optionally extendable up to 3 years.
Features And BenefitsEasy to UseCOMMANDO AirONE Indoor AP300 is WEB GUI based easy to use and manage device. It requires minimal configuration, so setup is simple and hassle-free. Auto-negotiation senses the link speed of a network device in wired 10/100Mbps and also for wireless devices intelligently adjusts for compatibility and optimal performance by DFS and setting channel bandwidth 20/40MHz wireless band and also can check free channels available with inbuilt Wi-Fi analysis. Its compact size makes it ideal for Indoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.Fast Ethernet LAN speedIt provides and offers a wide range of models for different network deployment requirements with Fast Ethernet speed. These energy efficient AP is well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.Wireless client supportedSupports up to 64 Max wireless users/clients up to distance of 45 meters and above from AP in all directions.Network SecuritySupport Flexible user Access Control Policies, Network Security to meet varied Customer needs. MAC Filtering function to block the access of illegal hosts. Supporting One-Click IP-MAC Binding to avoid ARP spoofing. Access Rules can be applied to permit or deny Wi-Fi users.Auto MDIX CapabilitiesAuto sensing 10/100Mbps ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.Compact and Silent PerformanceIt operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.Support uninterrupted critical network infrastructureIt has Dual power options with DC input power and PoE power input which protect from power failures and increases life of device. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.Cost EfficientState of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.Green TechnologyIt features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.SoftwareCOMMANDO AirONE AIR-AP300 Indoor Wireless Access Point supports software functions as follows:HomeDevice Information like CPU Usage, Memory Usage, LAN Information like IP Mode Get IP From AC/Gateway/Static, Status with 2G Wi-Fi, Clients Status with information like SSID, Channel, Bandwidth, Encrypt, MAC Address, Operation Mode configure like AP/ Fat AP Mode with Uptime, Flow in bps for AP Downstream and AP Up streamWizardGateway Mode, Repeater Mode, WISP Mode, AP Mode (Default Selection)Wi-Fi2G Wi-Fi Basic and VAP (1 to 3) ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2PSK_TKIPAES, MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option, Wi-Fi Timer Off/ON with Time Frame, Advanced setting like Country Region, 2G Channel (1-13), Multicast Fast, Maximum for per AP (Range 1-64), WLAN Partition, Short GI, Coverage Threshold(-95dBm~-65dBm), TX Power, DFS.NetworkLAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server SettingsManageConfigure, Reboot, Modify Password, Upgrade, Time, LogTable 1. Software functions
HardwareSolid performance with non-blocking architecture•Up to 16 MB Flash, 128MB RAM
•All ports capable of Fast Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
•Solid performance with non-blocking architecture.
Physical Ports and Networking Interfaces•Up to 2 x 10/100Mbps Mbps Rj45 Ethernet Ports with combined PoE with WAN and separate LAN port
•LED Indicators: Power, LAN, WAN.
•Reset Button
Extra Long operational life•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Support temperature range 0° C to 50° C
•Desktop and Wall mount design Which enables horizontal and vertical wall mounting.
Noise-free Operation•The ports support reduced power modes for silent operation. Perfect for noise sensitive environments.
Table 2 Hardware Specifications
| DescriptionSOFTWARE FEATURE SET (SOLDIEROS L2+)Highlights:• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
L3 Features:• L3 Static/Default Route
• Gratuitous ARP
• IPv6
L2 Features:• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN – IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror – Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
QoS Features:• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
Security Features:• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
Management Features:• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
| Tp-Link TL-WN881ND 300Mbps Wireless N PCI Express Adapter - Adapter
Wireless N PCI Express 2.0(x1) Adapter TL-WN881ND allows you to connect a desktop computer to a wireless network and access a high-speed Internet connection. Complying with IEEE 802.11n, they provide wireless speeds up to 300Mbps, which is beneficial for online gaming or even HD video streaming.
Wireless N - Speed & Range
MIMO (multiple input, multiple output antennas) technologies, show more excellent abilities to mitigate data loss over long distances and through obstacles in a small office or a large apartment, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
CCA Technology - Stable Wireless Signals
Clear Channel Assessment (CCA) automatically avoids channel conflicts using its clear channel selection feature and fully realizes the advantages of channel binding, greatly enhanced the wireless performance.
WPA / WPA2 Encryptions
WPA/WPA2 encryption standards ensure your wireless connection is safe from intruders.
Easy Setup
Either using the optimized user interface and setup wizard or the CD (included) setup wizard will allow you to get ‘online’ quickly and easily.
* Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications are based upon test results under normal usage conditions. Actual wireless transmission rate and wireless coverage are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Thank you! |
COMMANDO Soldier C2000 Series Switches are fully managed, perpetual PoE/PoE+/PoE++ IEEE 802.2af/at/bt (15.4W, 30W, 90W) compliant Gigabit Ethernet L2+ switches having power budget up to 800 W with network resiliency and high availability, delivering robust performance with intelligent switching, scheduling and distribution of Power as per requirement of PD which make PoE/PoE+/PoE++ available on maximum ports despite lower PoE power budget and perpetual PoE/PoE+/PoE++ for no power downtime required for growing networks. This series switches are easy to deploy, use, manage and designed exclusively for the networking needs of growing businesses. The security features equipped with today’s advance networking hardware and software technology. This Series switches can be deployed in harsh environments to deliver hassle free mission-critical network services and surveillance requirements.
COMMANDO Soldier C2000 Series Switches are fixed configuration, with flexible 1G or 10G Fiber/ 1GE or 10GE copper Ethernet fixed Uplink that provide enterprise-class access for campus and branch applications. Designed for the digital workplace, these are optimized for today’s mobile and IoT needs. These switches are powerful and flexible enough for users to deploy PoE++/PoE+/PoE standard supplies up to 90W/30W/15.4W per port with power budget up to 800W, Backward compatible power per port which is ideal for PD applications using high power wireless access points, PTZ (Pan Tilt Zoom) IP cameras, Surveillance cameras, VoIP telephony systems, kiosks, POS terminals, thin client, 802.11ac and 802.11ax access points, small cells, and connected LED lighting devices over longer distances up to 250 meters. The 90W PoE++, IEEE 802.3bt technology drives high-power infrastructure for smart building systems, safe cities, thin clients, and a lot more. Facility managers and building owners can adopt the standard perpetual PoE/PoE+/PoE++ to make network future-proof all PoE/PoE+/PoE++ networks requirements. With outcome lower installation and wiring costs without changing network hardware. It provides easy device rack and wall-mounting, on boarding, configuration, monitoring, and troubleshooting. These fully managed switches can provide advanced L2+ and basic Layer 3 features as well as supports IEEE 802.3af compliant PoE (Power over Ethernet), 802.3at compliant PoE+ (Power over Ethernet plus) and IEEE802.3bt type-4 Ultra PoE++ (Power over Ethernet plus plus). Each switchport is capable to deliver 15.4W PoE/ 30W PoE+ or 15.4W PoE/ 30W PoE+/90W PoE++ power on all ports as per switch model with power budget up to 800W along with automated power (ON/OFF) scheduling. Switches are PoE/PoE+/PoE++ capable to provide power across all access ports for wireless APs, security cameras, and other IoT devices. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure, and energy-efficient business operations with intelligent and automated services.
It also provides a convenient and cost-efficient wired access rack and wall mountable solution that can be quickly set up with Zero Touch Provisioning. These switches deliver enhanced application, visibility, network reliability, network resiliency and high availability.
It has wire-speed back haul bandwidth capacity with fixed uplinks 1GE or 10GE copper/ 1G or 10G Fiber. This series also offers robust QoS to optimize traffic on your business network, these switches provide (Port-based/802.1p/DSCP) QoS to keep latency-sensitive video and voice traffic jitter-free moving smoothly. Additionally, Port-based, Tag-based VLAN, Voice VLANs, Surveillance VLAN can improve QoS and enhance security to meet network requirements. This series switches also have provisioning of QoS, Static routing, IPV6 features, multicasting, and Security. Moreover, with its innovative energy-efficient technology, can save up to 58% of power consumption, making it an Eco-friendly perfect solution for your business network.
Product HighlightsCOMMANDO Soldier C2000 Series Switches contain 8, 24 and 48 Gigabit Ethernet perpetual PoE/PoE+/PoE++ models as well as non-PoE port-based models along with 1/10GE Ethernet Copper-based or 1/10G Fiber Ports (SFP/SFP+) fix Uplinks. This series also has 8, 24 & 48 Fiber SFP Ports models. Switches in COMMANDO Soldier C2000 Series Switches contains 24 & 48 Gigabit Ethernet PoE/PoE+/PoE++ models have up to 90W Per Port power budget and this series switches have total power budget 600W and 800W to meet enhance PoE/PoE+/PoE++ requirement of IP Phone/AP/LWAP/Wi-Fi Access Point and any other PoE/PoE+/PoE++ enabled devices. This series offers various Layer 2+ Ethernet functions (VLAN, QoS, MAC ACL, Port Security, IPv6, LACP, port mirroring, GVRP and many more). These Gigabit Ethernet switch enables home and office users to easily connect and supply power to high power wireless access points, PTZ (Pan Tilt Zoom) IP cameras, Surveillance cameras, VoIP telephony systems, kiosks, POS terminals, thin client, 802.11ac and 802.11ax access points, small cells, and connected LED lighting. It also provides the opportunity to add additional Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. This compact PoE/PoE+/PoE++ switch operates quietly, making it ideal for use in virtually any room or office.L3 Highlights•Layer 3 Static Routing up to 512 static route entries along with DHCP server.
•DHCP server, Client, Relay along with DHCP Snooping, DHCP Snooping option82.
•L4/L3/L2 Access Control Lists (ACLs) for granular network access control including 802.1x port authentication.
• SNMP v1/v2c/v3 and RMON remote monitoring.
• IGMP v1/v2/v3 and MLD v1/v2 snooping, providing advanced multicast filtering and optimization.
•Advanced QoS (Quality of Service) for traffic prioritization including port based, 802.1p and L4/L3/L2 DSCP based. L4/L3/L2 QoS optimize voice and video applications.
•Provides IP-MAC Binding, Port Security, Storm control and DHCP Snooping which protect against broadcast storms, ARP attacks.
•Comprehensive IPv6 supporting management, IPv6 ready QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network.
•Auto “denial-of-service” (DoS) prevention.
•Easily troubleshoot any problem in network with Ping, trace route, various show and debug command and WEB GUI based real time status of device.
L2+/L2 Highlights•Store-and-forward Switching Scheme.
•Solid performance with non-blocking architecture, up to 8000 entries MAC Address Table for 8, 24 ports Switch models and 16K-entry L2 MAC table 48 port Switch models.
•with 4-way hashing algorithm, 4094 VLANs, 1024 to 2K+256 ACL entries, 512 static routes, Maximum packet length 10000 bytes and Jumbo frames of 10000 to 12000 bytes.
•2-hash algorithm selection for L2 table searching/learning with Aging timer range from 0.2s to 1600000s.
•Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guard.
•Independent 512 to 4000-entry L2/IP Multicast table for multicast function.
•Advanced L2+ switching and security features like IP-MAC-Port-VID Binding, Static/Dynamic Port Security (MAC-based), DoS defend feature, Dynamic ARP Inspection.
•Advanced VLAN support for better network segmentation.
•Port mirroring with 4-sets of port mirrors for network monitoring.
Other Highlights•8, 24 and 48 ports with auto-negotiation 10/100/1000Mbps perpetual and intelligent PoE/PoE+/PoE++ & Non PoE Models along with 8, 24 and 48 Fiber SFP Ports Models.
•Extra 2/4/6 Ports with fixed uplinks 1G or 10G Fiber/ 1GE or 10GE Copper.
•Additional DC input power to enable UPS to mitigate power supply failures and support critical network infrastructure
•90W (PoE/PoE+/PoE++) or 30W(PoE/PoE+) Max Per port with backward compatible power.
•Perpetual PoE/PoE+/PoE++ provides non-stop PoE/PoE+/PoE++ power. Switch can continue to provide power during configuration and reboot, the PDs will not loss power while reloading.
•Intelligent PoE/PoE+ power supply transmission is more reliable as well as more PDs can be connected due to design of robust network transformer which uses high current.
•Various power budget options of 600W/800W for 24 & 48 ports PoE/PoE+/PoE++ Switch models.
•All ports capable of PoE/PoE+/PoE++ up to 48 ports of full Power over Ethernet capability.
•PD detection will automatically detect and provide required power for your PoE/PoE+/PoE++ devices.
•Easily configurable PoE/PoE+/PoE++ scheduling to automate the PoE/PoE+/PoE++ requirements in networks.
•Advanced per port PoE/PoE+/PoE++ controls for remote power management to automate ON/OFF of PoE/PoE+/PoE++ capable devices on particular specified timing per port basis.
•CPU Dual Core having frequency 500 MHz along with CPU Memory DRAM of 1GB, Flash memory of 256 MB and Packet Buffer memory of 4.1MB for 8, 16, 24 ports switch models and CPU Dual Core having frequency 700 MHz along with CPU Memory DRAM of 1GB, Flash memory of 256 MB and Packet Buffer memory of 12MB for 48 ports switch models.
•All ports capable of Gigabit Ethernet speed.
•Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX).
•Surge Protection up to ±6KV to designed to automatically protect Switches from surge events by limiting transient voltages and diverting surge currents.
•Small form-factor, fan-less as well fan design for silent operation. Perfect for noise sensitive environments.
•Temperature Control Fan to optimize cooling and noise. Automatic Temperature Controlled Fan speed using temperature sensor with bilateral heat dissipation.
•Long life electrolytic capacitance to increase the operational life of switches.
•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Rack and Wall mount design that enables to mounts in an EIA-standard 19-inch telco rack or equipment cabinet along with Rack-mounting kit available with device. Which enables horizontal surface mounting, wall mounting and having durable robust metal body.
•RJ45 Gold plated with 3U thickness, power and ports status/ activity and PoE Max indicator LED lights.
•Supports Energy Efficient Ethernet (IEEE802.3az), Innovative energy-efficient technology which saves up to 56% of power consumption for energy saving in the future.
•Easy to manage device with Web based Graphical User Interface (GUI), Command-Line Interface (CLI) - Telnet / SSH / HTTPS with RJ45 or console cables.
•With Zero Touch Provisioning: A simple, secure, unified plug and play.
•Dual image feature for reduced down-time when the firmware is being upgraded or downgraded or image file getting corrupted.
•WEB/CLI managed modes, SNMP, RMON bring abundant management features
•Supports Cable Diagnostics by Web GUI as well as CLI.
•Watchdog function used to protect the system from specific software or hardware failures that may cause the system to stop responding and self-recover from hanged state.
•RoHS Compliant with most of the packaging material can be recycled and reused.
• Comes with up to Five years extended warranty.
Features And BenefitsDHCP ServerMultiple IPv4 DHCP pools with Inbuild DHCP server can be set. DHCP pools and interface for individual VLANs. It also supports IPv4/ IPv6 DHCP Client, IPv4/ IPv6 DHCP Relay Option 82, IPv4/ IPv6 DHCP Snooping.Intelligent PoE/ PoE+/PoE++ with Automated SchedulingIt automates the PoE/PoE+ /PoE++ requirements in networks on per port basis. Advanced per port PoE/PoE+/PoE++ controls for remote power management to automate ON/OFF of PoE/PoE+/PoE++ capable devices on particular specified timing per port basis with auto ON/OFF PoE/PoE+/PoE++ as per Scheduled time which makes them intelligent.Perpetual POE/PoE+With Perpetual PoE/PoE+, no power downtime to connected PD devices. PD devices remains power ON even when any software process is not running on the switch. Provides non-stop PoE/PoE+ power and continue to provide power during configuration and reboot, the PDs will not lose power while reloading. The Perpetual POE provides uninterrupted power to connected powered device (PD) even when the switch is booting to make it highly available network without any interruptions.Ultra PoE++ (IEEE 802.3bt 90W)COMMANDO BT series Switches with PoE+/Ultra PoE++ standard supplies up to 90W of power per port ideal for applications using high power wireless access points, PTZ (Pan Tilt Zoom) IP cameras, Surveillance cameras, VoIP telephony systems, kiosks, POS terminals, thin client, 802.11ac and 802.11ax access points, small cells, and connected LED lighting, which is useful for small to medium-sized businesses, Internet cafes, hotels, schools, and others. They are easy to install and maintain and provide PoE+/Ultra PoE++ power to high power demanding devices, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds with copper/fiber ports as well as built-in PoE+/Ultra PoE++ IEEE 802.3at/IEEE802.3bt type-4 (90W) while reducing energy consumption and minimizing noise with built-in PoE+/Ultra PoE++ IEEE 802.3at/IEEE802.3bt type-4 (90W) with circuit protection preventing power interference between ports. In a nutshell, 90W PoE++ means affordable power for more power-hungry devices, more business and future ready.Dual ImageIt can be configured with one image is set as start-up image, and the other is set as the backup image. After you upgrade a firmware, the switch will automatically map the firmware file to the backup image.Watchdog FunctionThis ensures high availability which is used to protect a system from specific software or hardware failures that may cause the system to stop responding and self-recover from hanged state.L3 FeaturesThis series is having L3 features with IPv4/IPv6 with 512 static routing entries, QoS, ACLs (Port based/ IP based/ MAC Based), DHCP Server and Client, DHCP Snooping, DHCP Snooping option82, DHCP Relay.L2+/L2 FeaturesThis series is having advance L2+/L2 features like Port aggregation up to 8 ports, VLAN, Voice VLAN, GVRP, 802.1X authentication, centralized MAC authentication, Guest VLAN, RADIUS authentication, SSH 2.0, Port isolation, Port security, MAC address learning limit, IP Source guard, Dynamic ARP inspection, Preventing man-in-the-middle attacks and ARP DoS attacks, IP/Port/MAC binding. Flexible Software features provides wide range of Layer 2 functions like VLAN, Multicasting, Quality of Service (QoS), Security.Secure NetworkingIEEE 802.1X port-based access control with surveillance VLAN, Port Security, Protected Port which also Prevent ARP Spoofing. L4/L3/L2 access control lists (ACLs) for granular network access control including 802.1x port authentication. ACL, L4 to L2 feature restricts access to sensitive network resources. DHCP Snooping ensures IP address allocation integrity by only allowing DHCP messages from trusted DHCP servers and dropping malformed DHCP messages with a port or MAC address mismatch. With DHCP Snooping binding and option82 enabled, it can combine dot1x and ARP. IP-MAC-Port-VID Binding, Port Security, Storm control which protect against broadcast storms. The switches support ARP attack and DoS attack prevention to safeguard the network.MulticastIGMP Snooping (v1, v2, v3), Multicast Listener Discovery (MLD) (v1/v2), Multicast VLAN Registration (MVR) designed for distribution of multicast traffic across segregated access networks which enables more efficient distribution of multicast streams in Layer 2 network.QoS FeaturesAdvanced QoS (Quality of Service) for traffic prioritization including port based, 802.1p and L4/L3/L2 DSCP based. L4/L3/L2 QoS optimize voice and video applications. Access Control List based, VLAN ID based IP precedence, COS and DSCP. Policy Based on Port & VLAN, Remark DSCP, COS/ 802.1p, Precedence, COS for SP, WRR for Scheduling and matching the IP fragmentation of message.10G Uplinks10G copper/fiber Uplink supports high speed networking requirement and reduces copper cabling investment for LACP and LAGs and improves network backbone. It supports high-speed access to the network backbone or data center environment. This provides great resiliency, relieves congestion associated with bandwidth-intensive applications, and guarantees smooth hassle-free data transmission.Easy Management with CLIWith familiar and popular Command Line interface (CLI), there is no need for engineers to be hired or additional resources to be spent on training and/or learning the switch CLI. The command set are familiar and well known in the industry. Web Graphical User Interface (Web GUI), Command Line interface (CLI), RADIUS/TACACS+ with industry standard CLI and easy to use Web GUI. Management is made easy via a Web GUI or industry-standard Command Line Interface (CLI), with administration traffic protected via SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and allows it to send traps when abnormal events occur.Easy to UseIt easy to use and manage and Plug-and-Play that requires no configuration, so setup is simple and hassle-free. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. The switches range from 24 & 48 Gigabit Ethernet perpetual PoE/PoE+/Ultra PoE++ models as well as non-PoE models along with 1G/10GE copper-based or 1G/10G Fiber Ports Uplinks. This series also has 8, 24 & 48 Fiber SFP Ports models. It contains 24 & 48 Gigabit Ethernet PoE/PoE+/Ultra PoE++ models have up to 30W (PoE/PoE+) or 90W Ultra PoE++ Per Port power budget and this series switches have total power budget up to 800W to meet PoE/PoE+/Ultra PoE++ needs. Its compact size makes it ideal for rackmount/wall-mount with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.Lifetime Free Software Licensing and UpgradesSoldierOS Software license and Upgrades are free for lifetime. Users do not have to worry about switch license expiring and software getting outdated (which is constant concern and worry of few other brands). This series has improved HTTP base firmware upgrade as well as CLI based upgrades which are freely available to all users without any cost or license fee for lifetime. COMMANDO Soldier C2000 Series Switches are easy to install, configure, monitor, and troubleshoot. It significantly reduces cost of administration and Total Cost of Ownership (TCO).Auto MDIX CapabilitiesAuto sensing/Auto PoE/PoE+/PoE++ 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches.Flexible Service ControlWith various ACLs to flexibly control ports. It also supports Port-based VLAN assignment, MAC address-based VLAN assignment, Protocol-based VLAN assignment, and Network segment-based VLAN assignment. These secure and flexible VLAN assignment modes are used in networks where users move frequently. It also supports GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to ensure correct VLAN configuration and reduce network administrator workloads. This series switches supports SSH v1/v2/v3, RMON, port-based traffic statistics, LLDP/LLDP-MED.Compact Design with Flexibility of additional portsThe switches provide additional deployment flexibility, fiber connectivity as well as combo options for easy expansion of your networks. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Perfect for Noise-Sensitive EnvironmentsThese are the ideal solution for the most advanced small and medium organizations looking for the best combination of features, performance, and value. These switches are purposely designed for converged networks where voice, video, data are all carried on a single network platform. This series comes with fan/fan-less switches models along with Small form-factor, fan/fan-less design for silent operation. Perfect for noise sensitive environments. Fan based Switches have Temperature- and load-based fan-speed control combines accurate monitoring with minimized system acoustic noise. The Fan based switches also feature built-in smart fans that monitor and detect temperature changes, adjusting the fan speed for maximum efficiency. At lower temperatures, the fans run at a lower speed, reducing both the power consumption and noise output of the switch.Zero MaintenanceCost efficient switches, with a reasonable PoE/PoE+/PoE++ power budget up to 800W along with PoE/PoE+/PoE++ configurable scheduler to automated Power ON/OFF connected PoE/PoE+/PoE++ devices as per scheduled timing with Cost of ownership is less compared to other products of same features as well as zero maintenance. Maximum power reduction for ongoing operation cost savings.Easy Debugging and TroubleshootingPing, Traceroute, SNMP, RMON, Web based real time Switch ports monitoring with WEBUI and CLI can easily troubleshoot any problem in network with various show and debug commands.Longer Distance CoverageState of art quality switches that can serve real time high-speed performance which covers longer physical distance up to 250 meters with copper pairs compared to other brands.Warranty:The switches come with up to Five-year extended warranty.SoftwareThe COMMANDO SoldierOS IP Base switches provides advanced L2 switching and security features along with ACLs (MAC/IP/Port) based IPV4 and IPV6, L4/L3/L2 QoS , Static Routing up to 512 static route entries, Spanning Tree Protocol (IEEE802.1D STP , IEEE802.1w RSTP, IEEE802.1s MSTP) SNMP v1/v2c/v3, IGMP and MLD snooping, QinQ and selective QinQ, VLAN mapping, Voice VLAN, GVRP, Advanced multicast filtering, and IGMP snooping that optimize voice and video applications, DHCP Server, DHCP Client, DHCP Snooping, DHCP Snooping option82, DHCP Relay, RADIUS/TACACS+ authentication, SSH 2.0, Port isolation, Port security, MAC address learning limit, IP Source guard, Dynamic ARP inspection, preventing man-in-the-middle attacks and ARP DoS attacks, IP/Port/MAC binding. Management is made easy via a web-based Graphical User Interface (GUI) access via HTTP/HTTPS or industry-standard Command Line Interface (CLI) via Console/ Telnet with administration traffic protected via SSL or SSH encryption. This CLI is well known and understood by all professionals in networking field. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and allows it to send traps when abnormal events occur. It provides a complete set of security features including L4/L3/L2 multi-layer Access Control Lists and 802.1x user authentication via TACACS+ and RADIUS servers. This ensures the network is protected from unauthorized access. It also offers extensive VLAN support including GVRP and 802.1Q VLAN to enhance security and performance. A robust set of L4/L3/L2 based QoS/CoS solutions help ensure that critical network services such as VoIP and video conferencing are served with priority. Bandwidth Control can be flexibly set for each port using predefined thresholds to assure a committed level of service for end users. For advanced applications, flow-based bandwidth control allows easy fine-tuning of service types based on specific IPV4/IPV6 addresses or protocols that provides Security, Performance & Availability. Access control lists (ACLs) perform operation of filtering (IPv4/IPv6) Packet/MAC/port-based filtering to control the movement of segments/packets/frames through a network. ACL filtering provides security by limiting the access of traffic into a network, restricting user and device access to a network, and preventing traffic from leaving a network. Time range-based ACL, VLAN-based ACL, Bidirectional ACL. Packet filtering at Layer 4 through layer 2 Traffic classification based on source IPv4/IPv6 addresses and source MAC addresses, destination MAC addresses. L4/L3/L2 Quality of service (QoS) refers to any technology that manages data traffic to reduce packet loss, latency, and jitter on the network. QoS controls and manages network resources by setting priorities for specific types of data on the network. Static routing is a form of routing that occurs when these switches use a manually configured 512 IPV4 static routing entries. Static routing has three primary uses:•Ease of routing table maintenance in smaller networks with little growth or change. Routing to and from connected networks.
•A network accessed by a single route, and the router has only one neighbor.
•Single default route to represent a path to any network.
Software Highlights:• DHCP Server for multiple IPv4 DHCP pools with inbuild DHCP server can be set. DHCP pools and interface for individual VLANs. It also supports IPv4/ IPv6 DHCP Client, IPv4/ IPv6 DHCP Relay Option 82, IPv4/ IPv6 DHCP Snooping.
• Intelligent PoE/ PoE+/PoE++ with Intelligent scheduling to automate the PoE/PoE+/PoE++ requirements in networks. Advanced per port PoE/PoE+/PoE++ controls for remote power management to automate ON/OFF of PoE/PoE+/PoE++ capable devices on particular specified timing per port basis with auto ON/OFF PoE/PoE+/PoE++ as per Scheduled time which makes them intelligent.
• Perpetual POE/PoE+/PoE++ for no power downtime to connected PD devices even when any software process is not running on the switch. Provides non-stop PoE/PoE+/PoE++ power and continue to provide power during configuration and reboot.
• Dual Image can be configured with one image is set as start-up image, and the other is set as the backup image. After you upgrade a firmware, the switch will automatically map the firmware file to the backup image.
• Watchdog function ensures high availability which is used to protect a system from specific software or hardware failures that may cause the system to stop responding and self-recover from hanged state.
Layer 3 Switching• Static ARP as manually added IP network address to the hardware MAC address of a device as well dynamic ARP entries.
• Static Route, Default route and Dynamic connected route learning. Static Route, Default route, connected route up to 512 route entries are supported.
• Access Control List Access Control Lists (ACLs) can be used to deny and allow packets and provides flexible access control based on Standard IPV4, IPV6, MAC based, Management and also Port based Filtering.
• Comprehensive IPv6 supporting management, IPv6 ready QoS and ACL, ensuring investment protection and a smooth migration to IPv6-based network.
• QoS Features like Scheduling Mode: WRR, SP, which are Based on Port based on 802.1p DSCP (DiffServ), COS and DSCP.
Advanced L2/L2+ Switching• Auto Port Configuration, Auto-Negotiation for port speed and duplex mode. Flow Control for IEEE802.3x full-duplex and half-duplex backpressure.
• Rate Limit enable to slow down traffic on a port to keep it from exceeding the limit set.
• Link Aggregation with LAG static and IEEE802.3ad Link Aggregation Control Protocol (LACP) increases bandwidth by automatically aggregating several physical links together as a logical trunk and providing load balancing and fault tolerance for uplink connections. Up to 8 maximum aggregation groups.
• Link Layer Discovery Protocol (LLDP) neighbor discovery protocol that allows devices to advertise device information to their directly connected peers/neighbors.
• Unidirectional Link Detection protocol (UDLD) that detects and disables one-way connections before they create undesired situation such as network failure, Spanning Tree loops and broadcast storm.
• Spanning Tree Protocol (STP) eliminates Layer 2 loops in a network by selectively blocking specific links. STP also enables link redundancy. Support IEEE 802.1D (STP), from which IEEE 802.1W (RSTP) and IEEE 802.1s (MSTP 64 to 256 instance).
• Loopback Detection also has BPDU Filter, BPDU Guard.
• IGMP Snooping listening to Internet Group Management Protocol network traffic to control delivery of IP multicast. Network switches with IGMP snooping listen in on the IGMP conversation between hosts and layer 3 devices and maintain a map of which links need which IP multicast transmission.
• Static MAC address, MAC Configuration for MAC binding, MAC Address Filter.
• 4094 VLAN Configuration with advanced VLAN support for better network segmentation, VLAN Based on 802.1Q, MAC-Based VLAN, IP-Based VLAN, Protocol-Based VLAN, Voice VLAN, Guest VLAN, Private VLAN - Support 1:1 VLAN Mapping basic QinQ, Surveillance VLAN.
Secure Networking• MAC address limiting to enhanced Security. Port Security ensures access to switch ports based on MAC address to limit the total number of devices from using a switch port and protects against MAC flooding attacks, SYN Flood, ICMP Flood attack and prevention of DOS, BPDU Guard and Root Guard which avoid accidental network topology loops and prevent illegal edge devices become root to cause unnecessary flapping.
• IEEE 802.1X Port-based Access Control ensures all users are authorized before being granted access to the network. User authentication is carried out using any standard-based RADIUS server. 802.1x - RADIUS, AAA - MAC-based 802.1X authentication also Support 802.1x surveillance VLAN, Port Security, Protected Port and also Prevent ARP Spoofing.
• L4/L3/L2 Access Control Lists (ACLs) for granular network access control including 802.1x port authentication. IP, MAC, Ports based Access Control Lists (ACL, L4 to L2) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID.
• DHCP Snooping feature ensures IP address allocation integrity by only allowing DHCP messages from trusted DHCP servers and dropping malformed DHCP messages with a port or MAC address mismatch. With DHCP Snooping binding and option82 enabled, it can combine dot1x and ARP.
• IP-MAC-Port-VID Binding, Port Security, Storm control which protect against broadcast storms.
• ARP attacks prevention prevent typical DoS attacks can protect these attacks more easily ever than before.
Multicast• IGMP Snooping (v1, v2, v3) transmits data on demand on data link layer by analyzing IGMP packets between the IGMP querier and the users, to build and maintain Layer 2 multicast forwarding table.
• Snooping Multicast Listener Discovery (MLD) snooping (v1/v2) constrains the flooding of IPv6 multicast traffic on VLANs. MLD snooping performs the same function as IGMP snooping with the only difference being that MLD snooping is for IPv6 and IGMP snooping for IPv4 environments.
• Multicast VLAN Registration (MVR) is designed for distribution of multicast traffic on a dedicated multicast VLAN across segregated access networks, while allowing subscribers who are on different VLANs to join and leave the multicast groups carried in the Multicast VLAN. Multicast VLAN registration (MVR) enables more efficient distribution of IPTV multicast streams across an Ethernet ring-based Layer 2 network.
QoS features• Advanced QoS (Quality of Service) for traffic prioritization including port based, 802.1p and L4/L3/L2 DSCP based.
• L4/L3/L2 QoS optimize voice and video applications with ACL based, VLAN ID based IP precedence, COS and DSCP. Policy Based on Port & VLAN, Remark DSCP, COS/ 802.1p, Precedence, COS for SP, WRR for Scheduling and matching the IP fragmentation of message.
User friendly Maintenance Management• With Zero Touch Provisioning: A simple, secure, unified plug and play.
• CLI / Web GUI / SNMP Management with industry standard CLI and Web GUI based device-management tool that provides the ability to provision the device, to simplify device deployment and manageability, and to enhance the user experience. It comes with the software Image 0 can also have Image 1 (Dual image) simultaneously. There is no need to enable anything or install any license on the device. Then Web GUI can be used to build configurations, and to monitor and troubleshoot the device without having CLI expertise.
• Support Multi-user management at the same time.
• With RADIUS and TACACS+ server authentication can be performed locally or on a RADIUS/TACACS+ server can also control access to your network through Switch by using authentication methods such as 802.1X, MAC Based and Web Based.
• Configuration Download/Upload Upgrade Firmware by HTTP and TFTP.
Debugging and troubleshooting feature• PING, TRACEROUTE, SNMP, RMON, Web based real time switch ports monitoring with WEBUI can easily troubleshoot any problem in network with Ping, trace route, various show, debug command and WEBUI based real time status of device.
• Cable Diagnostics by WEB GUI as well as CLI.
• Maintenance & Operation Management via TFTP/FTP, CLI, Telnet, Console, Web GUI /SSL (IPv4/IPv6), SSH (IPv4/IPv6).
• Port Mirroring for network monitoring. Port mirroring is used on a network device to send a copy of network packets seen on one switch port, multiple other ports, or on to network monitoring connection on another port on the switch.
• SNMP v1/v2c/v3, management station, can monitor the performance of network devices. With SNMP, network managers can view or modify network device information, and troubleshoot according to notifications sent by those devices in a timely manner. Public and Private Management Information Base (MIB) interface
• RMON (Remote Network Monitoring) together with the SNMP system allows the network manager to monitor remote network devices efficiently. RMON reduces traffic flow between the NMS and managed devices, which is convenient to manage large networks.
Software Licensing and Upgrades• Free Software Upgrades and patching supports with enhanced functionality, which provides fixes for critical bugs and security vulnerabilities between regular maintenance releases. This free software upgrades and licenses support lets you add patches, new features, protocols, and functionality without having to spend a single dollar. This reduces TCO.
• Protected Ports ensure no exchange of unicast, broadcast, or multicast traffic between the protected ports on the switch, thereby improving the security of your converged network.
• Dynamic VLAN Assignment (RADIUS/TACACS+): IP phones and PCs can authenticate on the same port but under different VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location on the network.
• Port Mirroring and Cable Test Many-to-one port mirroring for better and quicker network diagnostics and troubleshooting. Cable test easily identifies bad Ethernet cables.
• Firmware updates and backup procedure by uploading/downloading file to PC/TFTP/FTP.
Table 1. COMMANDO SoldierOS IP Base Software at a Glance
Table 2. Performance of COMMANDO SoldierOS IP Base
Software Features1. L3 Features•Static ARP up to 1K
•Supports Gratuitous ARP
•IPv6 Neighbor Discovery (ND)
•Static Routing
•Max. 512 IPv4 entries
•Max. 512 IPv6 entries
•Supports Default Routing
2. L2 Switching FeaturesBasic L2 Switching Features•MAC Address Table with 8K to 16 K entries
•802.3x Flow Control when using full duplex
•Back Pressure when using half-duplex
•HOL Blocking Prevention
•Jumbo Frame Up to 10,000 to 12000 bytes
•ERPS (Ethernet Ring Protection Switching)
•Port Mirroring Supports One-to-One, Many-to-One, Supports Mirroring for Tx/Rx/Both, Supports 4 mirroring groups
•Flow Mirroring supports One-to-One, Many-to-One, Supports Mirroring for Rx, Supports 4 mirroring groups
•RSPAN mirroring
•Loopback Detection
•L2 Protocol Tunneling
Link Aggregation•Support static link aggregation
•Support 802.3ad LACP
•Up to 8 aggregation groups, containing 8 ports per group for 8, 24 & 48 ports Switches and 8 aggregation groups, containing 16 ports per group for 48 ports Switches.
Spanning Tree Protocol (STP)•IEEE 802.1D Spanning Tree Protocol
•IEEE 802.1s Multiple Spanning Tree Protocol
•IEEE 802.1w Rapid Spanning Tree Protocol
•STP Security: Loop back detection, TC Protect, BPDU Filter/Protect, Root Protect
Multicast•Support IGMP Snooping V1/V2/V3, with 256 groups to Independent 4K entry Multicast table for L2/IP multicast function
•Support multicast VLANs, IGMP Immediate Leave, Unknown IGMP Throttling, IGMP Filtering, Static Multicast IP
•L2 Multicast Filtering Forwards all groups, forwards all unregistered groups, Filters all unregistered groups
•MLD Snooping, MLD v1/v2 Snooping
•PIM Snooping
VLAN•Support IEEE802.1Q with 4K VLAN groups and 4K VIDs
•Support Port VLAN, Protocol VLAN and MAC-based VLAN
•Support GARP/GVRP feature
Quality of Service (QoS)•Support 802.1p CoS/DSCP priority
•Support 4 priority queues
•Queue scheduling: SP, WRR, SP+WRR
•Port/Flow- based Rate Limiting
•Voice VLAN assure voice applications have excellent performance
Advanced Security•IP-MAC-Port-VID Binding
•Static/Dynamic Port Security (MAC-based)
•DoS defend feature
•Dynamic ARP Inspection
802.1x authentication•Support 802.1x port/MAC based authentication
•Support Radius authentication and accountability
•Guest VLAN
•RADIUS/TACACS+
Access Control List (ACL)•L2~L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports, 802.1p, DSCP, protocol and VLAN ID.
•Time based ACL
•Support Broadcast, Multicast and Unknown unicast Storm Control
•Secure web management through HTTPS and SSLv2/v3/TLSv1
•Secure remote command line interface (CLI) management with SSH v1/V2
Management•Support Web-based GUI management mode
•Support Command Line Interface (CLI) through console port, telnet management mode
•SNMP v1/v2c/v3
•RMON (1, 2, 3, 9 groups)
•DHCP Server
•DHCP/BOOTP Client
•DHCP Snooping
•DHCP Option 82
•CPU Monitoring
•Port Mirroring (Many to One)
•Cable Diagnostics feature
•Ping/Tracert feature
•SNTP
•System Log
3. Ethernet Protocols•IEEE 802.3i 10BASE-T
•IEEE 802.3u 100BASE-TX/FX
•IEEE 802.3ab 1000BASE-T
•IEEE 802.3z 1000BASE-X
•IEEE 802.3ae 10GEBASE-T
•IEEE 802.3ak 10GBASE-X
•IEEE 802.3av GVRP
•IEEE 802.3ad Link Aggregation
•IEEE 802.3x Flow control
•IEEE 802.1p QoS
•IEEE 802.1q VLANs / VLAN tagging
•IEEE 802.1v Protocol VLAN
•IEEE 802.1d Spanning Tree Protocol (STP)
•IEEE 802.1s Multiple Spanning Tree (MSTP)
•IEEE 802.1w Rapid Spanning Tree (RSTP)
•IEEE 802.1x Network Login Security
•IEEE 802.3x flow control for Full Duplex mode and back pressure for Half Duplex mode
4. MIBs (Management Information Base)•Ethernet-like MIB (RFC 3635)
•Interface Group MIB (RFC 2863)
•RMON (RFC 2819)
•Bridge MIB (RFC 1493)
•Bridge MIB Extension (RFC 2674)
Table 3. Key software function of COMMANDO SoldierOS IP Base
Convergence TimeBy default, RSTP used for all COMMANDO SoldierOS and it takes less than 10 seconds for entire network to converge. RSTP converges faster because it uses a handshake mechanism based on point-to-point links instead of the timer-based process used by STP. IP multicast snooping and IGMP automatically prevent flooding of IP multicast traffic. IEEE 802.1AB Link Layer Discovery Protocol (LLDP) facilitates easy mapping using network management applications with LLDP automated device discovery protocol LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to configure automatically network devices such as IP phones. STP/RSTP/MSTP for loop free network, IEEE 802.1s Multiple Spanning Tree provides high link availability by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w IEEE 802.3ad Link Layer Discovery Protocol (LACP) and port trunking support up to 8 static, dynamic, or distributed trunks with each trunk having up to 8 to 16 links (ports) per static trunk. Lag links provides easy-to-configure link redundancy of active and standby links.SecurityThe AAA feature allows you to verify the identity of, grant access to, and track the actions of users. The COMMANDO Soldier C2000 Series Switches support Remote Access Dial-In User Service (RADIUS) or Terminal Access Controller Access-Control System Plus (TACACS+) protocols. Based on the user ID and password combination that you provide, the COMMANDO Soldier C2000 Series Switches perform local authentication or authorization using the local database or remote authentication or authorization using one or more AAA servers. A pre-shared secret key provides security for communication between the COMMANDO Soldier C2000 Series Switches and AAA servers. You can configure a common secret key for all AAA servers or for only a specific AAA server. COMMANDO Soldier C2000 Series Switches Multiple user authentication methods•Uses an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server to authenticate in accordance with industry standards
•Supports web-based authentication
•Supports MAC-based authentication
•Multiple IEEE 802.1X users per port provides authentication of multiple devices on a single port; prevents a user from piggy backing on another user’s IEEE 802.1X authentication
•Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port switch port will accept up to 8 sessions of IEEE 802.1X, Web, and MAC authentications
•Access control lists (ACLs) provide IP Layer 3 filtering based on source and destination IP address or subnet or source and destination TCP/UDP port number
•Source-port filtering allows only specified ports to communicate with each other
•RADIUS/TACACS+ eases switch management security administration by using a password authentication server
•Secure shell encrypts all transmitted data for secure remote CLI access over IP networks
•Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
•Port security allows access only to specified MAC addresses, which can be learned or specified by the administrator
•MAC address lockout prevents particular configured MAC addresses from connecting to the network
•Secure FTP allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
•Switch management logon security helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
•Custom banner displays security policy when users log in to the switch
•STP BPDU port protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
•DHCP protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
•Dynamic ARP protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
•Dynamic IP lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
•STP root guard protects the root bridge from malicious attacks or configuration mistakes
•Identity-driven ACL enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
•Per-port broadcast throttling configures broadcast control selectively on heavy traffic port uplinks
•Monitor and diagnostics digital optical monitoring of SFP and 1000BASE-T transceivers allow detailed monitoring of the transceiver settings and parameters
Effective ManagementCOMMANDO SoldierOS offers network monitoring for users to observe traffic behavior with Port Mirroring, Loop Prevention and DHCP snooping features, can identify and even locate connection problems on your business network.•Administrators can designate the priority of the traffic based on Port Priority, 802.1P and DSCP Priority, to ensure that voice and video are always clear, smooth and lag-free.
•Voice VLAN, port-based VLAN and 802.1Q-based VLAN functions. COMMANDO is an upgrade from the plug-and-play Unmanaged Switch, delivering great value while empowering your network and similarly delivering great value to the end user.
•RMON provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.
•Troubleshooting ingress and egress port monitoring enable more efficient problem solving.
•Unidirectional Link Detection (UDLD) monitors the link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices.
Table 4. COMMANDO Soldier C2000 Series Switches PoE/PoE+/PoE++ Power Budget and slots
PoE/PoE+/PoE++ FlexibilityCOMMANDO SoldierOS Power over Ethernet (PoE/PoE+/PoE++) enabled switches with a total power budget of up to 800W for different kinds of PoE/PoE+/PoE++ devices over a long-range copper cable length up to 250m, provides power and network connectivity for PoE/PoE+/PoE++ powered devices over a single network cable with schedule time as per time set by network administrator. PoE/PoE+/PoE++ devices range from wireless access points, IP cameras, VoIP phones, PoE LED lighting, PoE speakers to IoT doorbells and other IoT, Wireless Access Points, Wireless Bridges, or other standards compliant PoE/PoE+/PoE++ all end devices with Scheduling of power on each port to fully automate network. This series switches provide a quick, safe and cost-efficient IEEE 802.3af/at/bt PoE/PoE+/PoE++ network solution for small businesses and enterprise. By default, the switches automatically detect IEEE 802.3af/at/bt devices so they automatically receive PoE/PoE+/PoE++ power.Table 5. COMMANDO Soldier C2000 Series Switches LED Indication
Power Budget According to Cable LengthIdeally, shorter cables would use less power because of less power degradation over their length This is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 100 meters in length. These switches analyze the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution.Table 6. COMMANDO Soldier C2000 Series Switches Cable Lengths
HardwareCOMMANDO Soldier C2000 Series Switches has 4.1 to 12 Mbit SRAM Packet Buffer memory with Packet length of 10K bytes. L2 MAC Function with 8K entries for MAC address learning for 8, 24 port Switch models and 16K-entry L2 MAC table 48 port Switch models with the 4-way hash L2 table and searching with two hash algorithms. Independent 512- 4K entry L2/IP Multicast table for multicast function, 2-hash algorithm selection for L2 table searching/learning. Aging timer ranges from 0.2s to 1600000s. It has a 4K-entry VLAN table and provides a 64-entry filtering database for 802.1Q port-based, protocol- and-port-based, 802.1Q-based, IP-subnet-based, and ACL Rules-based VLAN operation to separate logical connectivity from physical connectivity with IVL (Independent VLAN Learning), SVL (Shared VLAN Learning), and IVL/SVL (both Independent and Shared VLAN Learning) for flexible network topology architecture. The mode used depends on the FID (Filtering Identifier) setting. It also has a 1.5K to 2K+256 entry Access Control List (ACL) that parses various protocol packet types and performs configurable actions, e.g., Permit/Drop, redirect, and traffic policing. It has per-port ingress/egress bandwidth control and per- queue egress bandwidth control. It has 8 physical queues in each port. It also has three types of packet scheduling, SP (Strict Priority), WFQ (Weighted Fair Queuing), and WRR (Weighted Round Robin). Each queue provides a leaky bucket (LB) to shape the incoming traffic into the average rate behavior. Port-based 802.1X and MAC-based 802.1X authentication prevent unauthorized users. It also has port isolation to enhance port security. It has 4-set port mirror configuration to mirror ingress and egress traffic for network management purposes, complete MIB counter support reflects the switch status in real time. Link aggregation static and dynamic to increase link redundancy and increase linear bandwidth. It supports VLAN Function with IVL, SVL, and IVL/SVL, IEEE 802.1Q VLAN with 4K-entry VLAN Table, Port-based VLAN, Port-and-protocol-based VLAN, ACL-based VLAN. Limited learned L2 MAC entry on each port and each VLAN. Supports flexible Q-in-Q and VLAN Tag function. It Supports up to 64-256 spanning tree instances for MSTP (IEEE 802.1s), RSTP, and STP with Automatic loop detection and isolation (RLPP/RLDP). L3 Unicast Routing with 512 next hop MAC. IEEE 802.3az Energy Efficient Ethernet (EEE). IGMPv1/2/3 and MLDv1/2 snooping. It also Supports Reserved Multicast Addresses processing and L2 Miscellaneous Functions like Supports broadcast, multicast, unknown- multicast, and unknown-unicast packet suppression control, IEEE 802.1x, Port Mirroring with 4-sets of port mirrors, Flow-based mirror function, RSPAN function for remote mirroring. It supports Link Aggregation (IEEE 802.3ad) for 8 groups of link aggregators with up to 8 ports per-group, Port isolation function to enhance port security. It also has Attack Prevention, Land attack, Blat attack, TCP control flag attack, Ping attack, Packet length attack. It supports Access Control List (ACL) Function with 1.5K-entry to 2K+256 shared entry for ingress and egress ACL. ACL table and L4/L3/L2 format (e.g., DMAC, SMAC, and Ether-Type), IPv6 Parsing and Per-flow traffic policing with 16-entry VID range checking. It also supports 8-entry IPv4 or 2-entry IPv6 range checking. 256 to 512 leaky buckets for flow traffic policing. It supports QoS Functions with 8 physical queues per port, Strict Priority (SP) and Weighted Fair Queue (WFQ), Weighted Round Robin (WRR) packet scheduling, QoS remarking for 802.1p and DSCP (includes IPv4/IPv6) also Supports average packet rate control leaky bucket per queue, in 16Kbps steps up to 1Gbps maximum. Ingress port bandwidth control, in 16Kbps steps up to 1Gbps maximum. Egress port bandwidth control, in 16Kbps steps up to 1Gbps maximum. It supports MIB Functions with 256 to 2K 32-bit packet-based or 1K 64-bit byte-based log counters to enhance MIB counter log counters to enhance MIB count functionality. It also supports Ethernet-like MIB (RFC 3635), Interface Group MIB (RFC 2863), RMON (RFC 2819), Bridge MIB (RFC 1493), Bridge MIB Extension (RFC 2674). It has Hardware Watchdog support which guard against certain types of system hangs. Watchdog timer is used to escape from if something goes wrong. Based on the situation, the Switches can automatically reset itself, or recover from the failure and generate an error message in the console logs. Long life electrolytic capacitance. High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process. Rack mount design, Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (Rack-mounting kit available); horizontal surface mounting; wall mounting with durable robust metal body. Bilateral heat dissipation. Power and ports status/ activity indicator LED lights. RJ45 Gold plated with 3U thickness. It also supports has IEEE 802.3az Energy Efficient Ethernet (EEE) for 100Base-TX in full duplex operation and supports 10Base-Te for 10Base-T in full/half duplex. The Energy Efficient Ethernet (EEE) operational mode combines the IEEE 802.3 Media Access Control (MAC) Sub-layer with a family of Physical Layers defined to support operation in Low Power Idle (LPI) Mode. When Low Power Idle Mode is enabled, systems on both sides of the link can disable portions of the functionality and save power during periods of low link utilization. 10Mbps PHY with reduced transmit amplitude requirements in EEE operational mode. This new PHY is fully interoperable with legacy 10Base-T PHYs over 100m of Class-D (Category 5) or better cabling.Now is the Time to Upgrade to 90W Ultra PoE++Ultra PoE++ offers a robust, end-to-end high power PoE solution with up-front cost savings. Fortunately, transitioning to the new standard won’t necessarily be a costly affair for users and installers or network seeking to deliver more power to, standard CAT 5 and 6 Ethernet cables are IEEE compatible So, you can add and move devices by moving these cables. Wiring and equipment costs remain down as there’s usually no need to move AC sources physically. Safety measures ensure up to 90W of power is safely delivered. Ultra PoE++, satisfies this hunger by extending the PoE and PoE+ specifications to 90W of PD delivered power. Ultra PoE++ capabilities of this standard expand the field of Ethernet-powered applications by several orders of magnitude, enabling entirely new classes of PDs, such as power-hungry picocells, base stations or heaters for pan-tilt-zoom cameras and these critical devices stay up during load shed. New IEEE 802.3bt Standard Boosts the Technology for IoT Applications. The first and the most important improvement in the 802.3bt standard is the capability to transfer much more power to edge devices (powered devices or PDs) 71.3 W, while sending 90 W from the power sourcing equipment (PSE) side enable in numerous new IoT and especially IIoT (Industrial IoT) power hungry and high-speed devices to be powered by PoE technology.•Expanding Ultra PoE++ Use Cases with the Adoption of High-Power IEEE.
•Safe Cities with PTZ Camara
•Smart Building Systems with Ultra PoE++ Powered LED Lighting
•High-Performance Wireless Access Points
•Intercoms, TVs, and Video Conferencing
Hardware HighlightsSolid performance with non-blocking architecture•CPU Dual Core having frequency 500 to 700 MHz along with CPU Memory DRAM of 1GB, Flash memory of 256 MB and Packet Buffer memory of 4.1MB to 12 MB.
•All ports capable of Gigabit Ethernet speed. Full speed of data transferring with (Auto-Negotiation/Auto MDI/MDIX)
•Solid performance with non-blocking architecture, 8000 to 16000 entries MAC Address Table with 4-way hashing algorithm
•4094 VLANs can be created
•1024 to 2K+256 ACL entries
•Up to 512 static routes
•Independent 512 to 4K entry L2/IP Multicast table for multicast function.
•Maximum packet length 10000 bytes
•Jumbo frames of 10000 to 12000 bytes.
•2-hash algorithm selection for L2 table searching/learning with Aging timer range from 0.2s to 1600000s.
•L2/L3/L4 QoS optimize voice and video applications with 256 leaky buckets for flow traffic policing.
•Switching Capacity: 216Gbps
•Forwarding Capacity: 191Mpps
•Store-and-forward Switching Scheme.
•VLAN L3 Interface: 16
•Port Queues: 8
•PoE Budget up to 800W depending on models
Physical Ports and Networking Interfaces•Up to 48 x 1GE or SFP Ports with 2/4/6 10G (SFP/SFP+) ports uplinks or 2/4/6 10GE ports Uplink or 8 combo ports 4 GE (RJ-45) or 4 SFP Uplinks. 8, 24 & 48 ports PoE (PoE+) & SFP/SFP+ models.
•Management Interface: Console, Mini USB.
•LED Indicators: Power, Link/Act, PoE Max.
•Additional DC input power to enable UPS to mitigate power supply failures and support critical network infrastructure.
IEEE 802.3af/at Compliant Power over Ethernet•Various power budget of 600W and 800W for 8, 24 and 48 ports perpetual PoE/PoE+/PoE++ Switch models. 90W Max Per port (PoE/PoE+/PoE++). POE power supply transmission is more reliable due to design of robust network transformer which uses high current. All PoE/PoE+/PoE++ ports are IEEE 802.3af-compliant PoE, IEEE802.3at-compliant PoE+ and IEEE 802.3bt-compliant PoE++. Each port delivers 15.4 W PoE, 30 W PoE+, 90W PoE++ power capacity with backward compatibility.
•PD detection will automatically detect and provide required power for your PoE/PoE+/PoE++ devices.
Extra Long operational life•High Quality PCB Circuit Board and PCB Surface Treatment Using Gold Sinking Process.
•Support temperature range 0° C to 55° C
•Surge protection up to ±6KV to designed to automatically protect Switches from surge events by limiting transient voltages and diverting surge currents.
•Long life electrolytic capacitance to increase the operational life of switches. RJ45 Gold plated with 15U thickness.
•Rack and wall mount design enables to mount the switch in an EIA-standard 19-inch telco rack or equipment cabinet along with Rack-mounting kit available with the device. It enables horizontal surface mounting, wall mounting with durable robust metal body.
Green Energy and Silent operation•Comply with IEEE 802.3az (Energy-Efficient Ethernet) standard, reduces power consumption up to 58% and reduce the noise pollution. Energy Efficient Ethernet (EEE) on the RJ-45 ports and low-power operations for industry best-in-class power management and power consumption capabilities. The ports support reduced power modes so that ports not in use can move into a lower power utilization state.
•Automatic Temperature Controlled fans with Temperature Sensor. Small form-factor, fan-less as well fan design for silent operation. Perfect for noise sensitive environments.
•Temperature Control fan to optimize cooling and noise with bilateral heat dissipation.
Ethernet Protocols•Supports wide range of IEEE 802.3i, 10BASE-T IEEE 802.3u, 100BASE-TX/FX IEEE 802.3ab, 1000BASE-T IEEE 802.3z, 1000BASE-X, 10GEBASE-T, 10GBASE-X, IEEE 802.3av, GVRP, IEEE 802.3ad, Link Aggregation, IEEE 802.3x, Flow control, IEEE 802.1p, QoS IEEE 802.1q, VLANs / VLAN tagging IEEE 802.1v Protocol, IEEE 802.1d Spanning Tree Protocol (STP), IEEE 802.1s Multiple Spanning Tree (MSTP), IEEE 802.1w Rapid Spanning Tree (RSTP), IEEE 802.1x Network Login Security, IEEE802.3af, IEEE802.3at.
Highly reliable and Enterprise design•High Quality as for all Mean Time Before Failure of system, MTBF > 200,000 hours
•Stability: 64bit packet, time delay < 10us, packet loss rate: 0
•Restorability of Network shaking or device breakdown, restart (recovery) time < 60 sec.
•RoHS Compliant with most of the packaging material can be recycled and reused.
| Product Description
TP-LINK’s Archer C50 comes with the next generation Wi-Fi standard – 802.11ac, 3 times faster than wireless N speeds and delivering a combined wireless data transfer rate of up to 1.2Gbps. With 300Mbps over the 2.4GHz band and 867Mbps wireless speeds over the crystal clear 5GHz band, the Archer C50 is the superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.
TP-Link Archer C50 Features
Fast Wireless Speed with 802.11ac
TP-Link’s Archer C50 comes with the next generation Wi-Fi standard – 802.11ac, 3 times faster than wireless N speeds and delivering a combined wireless data transfer rate of up to 1.2Gbps. With 300Mbps over the 2.4GHz band and 867Mbps wireless speeds over the crystal clear 5GHz band, the Archer C50 is the superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.
1.2Gbps Dual Band Connections for Lag-Free Work and Entertainment
The Archer C50 operates over both the 2.4GHz and 5GHz bands, ensuring amazing wireless performance. Simultaneous Dual Band offers you the flexibility of two dedicated networks – with multiple times the bandwidth for your needs. Simple tasks like sending e-mails or web browsing can be handled by the 2.4GHz band while bandwidth intensive tasks like online gaming or HD video streaming can be processed by the 5GHz band – all at the same time.
Innovative Antenna Design for Maximum Coverage
Four antennas make all of your connections more efficient and stable. PA amplifies Wi-Fi power and LNA increases the receiving sensitivity to enlarge Wi-Fi coverage for your home.
Guest Network
Guest Network Access provides secure Wi-Fi access for guests sharing your home or office network.
Parental Control
Parental Control allows parents or administrators to establish restricted access policies for children or staff.
IPv6 Supported
Archer C50 supports IPv6, the next generation of Internet protocol, helping you to future proof your network.
Tether APP
TP-Link Tether provides the easiest way to access and manage your router with your iOS and Android devices.
| SOFTWARE FEATURE SET (SOLDIEROS L2+)Highlights:• DHCP Server
• Intelligent PoE Scheduling
• Watchdog Function
• Dual Image
• Automated Traffic Control
• Sflow
• Traffic Segmentation
• MAC Notification
L3 Features:• L3 Static/Default Route
• Gratuitous ARP
• IPv6
L2 Features:• MAC Table 8K to 16K
• 802.3x Flow Control
• Back Pressure
• HOL Blocking Prevention
• Jumbo Frame
• ERPS
• Port Mirroring
• RSPAN
• Auto Loopback Detection and Prevention
• L2 Protocol Tunneling
• Link Aggregation Static / 802.3ad LACP
• STP/RSTP/MSTP
• IGMP Snooping v1/v2/v3
• Multicast VLANs
• MLD v1/v2 Snooping
• PIM Snooping
• VLAN - IP Subnet / Protocol / Voice / Surveillance / MAC based / Q in Q / Guest
• IEEE802.1Q with 4K VLAN groups and 4K VIDs
• GARP/GVRP
• Auto-negotiation for Port speed, PoE Power and Duplex mode with Flow Control
• VLAN Trunking
• Traffic Segmentation
• IGMP Querier / Snooping v1, v2, v3 / Throttling / Filtering / Immediate Leave
• MVR
• Mirror - Port Based (One to One, Many to One) / VLAN based / MAC based
• Ethernet Ring Protection Switching
QoS Features:• Queue Scheduling: SP, WRR, SP+WRR
• Traffic classification based on Port / IEEE 802.1p / DSCP
• Enhanced QoS (Shaping /Re-Marking)
• DiffServ
• Port based Egress / Igress Rate limiting
• Flow based Rate Limit
• Voice VLAN
• Surveillance VLAN
Security Features:• IP-MAC-Port-VID Binding
• DoS Defend
• Dynamic ARP Inspection
• 802.1x Authentication
• RADIUS / TACACS+
• ACL L4 / L3 / L2 / ARP / Time
• Storm Control
• HTTPS / SSLv2 / v3 / TLSv1 Secure Web Access
• Secure Remote with SSH v1/V2
• MAC Authentication with Dynamic VLAN / Dynamic QoS / Authentication By-pass
• Web Authentication
• Port Security with Violation Action Trap and/or Shutdown
• AAA Model
• Local user database
• DHCP Snooping & Option 82
• ARP Inspection
• IP Source Guard
• IP Filter for Web, SNMP , TELNET
• Automatic Traffic Control (ATC) for Broadcast and Multicast
Management Features:• User friendly Web GUI
• Feature rich and standard CLI
• SNMP v1/v2c/v3
• RMON (1, 2, 3, 9 Groups)
• DHCP Server / Client / Snooping / Option 82
• CPU Monitoring
• Cable Diagnostics
• Ping / Trace route
• SNTP
• System Log
• Login Banner
• CLI via Console port or Telnet/SSH
• SNMP v1, v2c, v3 with MAC Notification Trap
• Firmware Upgrade via TFTP/FTP/HTTP
• Configuration file Upload / Download via TFTP/FTP/HTTP
• BOOTP, DHCP Client
• SNTP
• LLDP (802.1ab) and LLDP-MED
• DNS
• Event/Error log / System log
• Remote Syslog
• SMTP Support for logs
• CPU and Memory Utilization Monitoring
• Ports Statistics and Chart
• Cable Diagnostic
• Scheduled Reload
• Reset to Factory Default
• Energy Efficient Ethernet IEEE 802.3az
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional information |